From: Kevin Wolf Date: Sat, 26 Mar 2011 18:37:56 +0000 (+0100) Subject: e1000: Mask out lower bits of RDBAL/TDBAL X-Git-Tag: Tizen_Studio_1.3_Release_p2.3.1~3168 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a1a070ca5a121bb5f986a110733d3e3c0eaeebfb;p=sdk%2Femulator%2Fqemu.git e1000: Mask out lower bits of RDBAL/TDBAL Rx and Tx descriptors are 16 byte aligned, so the lower bits are ignored by real hardware. In fact, they always read back as zero on real hardware, but probably nobody relies on that. Signed-off-by: Kevin Wolf Signed-off-by: Aurelien Jarno --- diff --git a/hw/e1000.c b/hw/e1000.c index 55daae0eba..fe3e812610 100644 --- a/hw/e1000.c +++ b/hw/e1000.c @@ -517,6 +517,14 @@ txdesc_writeback(target_phys_addr_t base, struct e1000_tx_desc *dp) return E1000_ICR_TXDW; } +static uint64_t tx_desc_base(E1000State *s) +{ + uint64_t bah = s->mac_reg[TDBAH]; + uint64_t bal = s->mac_reg[TDBAL] & ~0xf; + + return (bah << 32) + bal; +} + static void start_xmit(E1000State *s) { @@ -530,7 +538,7 @@ start_xmit(E1000State *s) } while (s->mac_reg[TDH] != s->mac_reg[TDT]) { - base = ((uint64_t)s->mac_reg[TDBAH] << 32) + s->mac_reg[TDBAL] + + base = tx_desc_base(s) + sizeof(struct e1000_tx_desc) * s->mac_reg[TDH]; cpu_physical_memory_read(base, (void *)&desc, sizeof(desc)); @@ -651,6 +659,14 @@ e1000_can_receive(VLANClientState *nc) return (s->mac_reg[RCTL] & E1000_RCTL_EN) && e1000_has_rxbufs(s, 1); } +static uint64_t rx_desc_base(E1000State *s) +{ + uint64_t bah = s->mac_reg[RDBAH]; + uint64_t bal = s->mac_reg[RDBAL] & ~0xf; + + return (bah << 32) + bal; +} + static ssize_t e1000_receive(VLANClientState *nc, const uint8_t *buf, size_t size) { @@ -700,8 +716,7 @@ e1000_receive(VLANClientState *nc, const uint8_t *buf, size_t size) if (desc_size > s->rxbuf_size) { desc_size = s->rxbuf_size; } - base = ((uint64_t)s->mac_reg[RDBAH] << 32) + s->mac_reg[RDBAL] + - sizeof(desc) * s->mac_reg[RDH]; + base = rx_desc_base(s) + sizeof(desc) * s->mac_reg[RDH]; cpu_physical_memory_read(base, (void *)&desc, sizeof(desc)); desc.special = vlan_special; desc.status |= (vlan_status | E1000_RXD_STAT_DD);