From: Pavel Herrmann Date: Wed, 8 Aug 2012 01:42:27 +0000 (+0000) Subject: dm: add PCI design document X-Git-Tag: v2012.10-rc1~70 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=a09c649972d132a2998d28c8d402eb625966ffe2;p=platform%2Fkernel%2Fu-boot.git dm: add PCI design document Signed-off-by: Pavel Herrmann --- diff --git a/doc/driver-model/UDM-pci.txt b/doc/driver-model/UDM-pci.txt new file mode 100644 index 0000000..b65e9ea --- /dev/null +++ b/doc/driver-model/UDM-pci.txt @@ -0,0 +1,265 @@ +The U-Boot Driver Model Project +=============================== +PCI subsystem analysis +====================== + +Pavel Herrmann +2012-03-17 + +I) Overview +----------- + + U-Boot already supports multiple PCI busses, stored in a linked-list of + pci_controller structures. This structure contains generic driver data, bus + interface operations and private data for the driver. + + Bus interface operations for PCI are (names are self-explanatory): + + read_byte() + read_word() + read_dword() + write_byte() + write_word() + write_dword() + + Each driver has to implement dword operations, and either implement word and + byte operations, or use shared $operation_config_$type_via_dword (eg. + read_config_byte_via_dword and similar) function. These functions are used + for config space I/O (read_config_dword and similar functions of the PCI + subsystem), which is used to configure the connected devices for standard MMIO + operations. All data transfers by respective device drivers are then done by + MMIO + + Each driver also defines a separate init function, which has unique symbol + name, and thus more drivers can be compiled in without colliding. This init + function is typically called from pci_init_board(), different for each + particular board. + + Some boards also define a function called fixup_irq, which gets called after + scanning the PCI bus for devices, and should dismiss any interrupts. + + Several drivers are also located in arch/ and should be moved to drivers/pci. + +II) Approach +------------ + + The pci_controller structure needs to be broken down to fit the new driver + model. Due to a large number of members, this will be done through three + distinct accessors, one for memory regions, one for config table and one for + everything else. That will make the pci_ops structure look like this: + + struct pci_ops { + int (*read_byte)(struct instance *bus, pci_dev_t *dev, int addr, + u8 *buf); + int (*read_word)(struct instance *bus, pci_dev_t *dev, int addr, + u16 *buf); + int (*read_dword)(struct instance *bus, pci_dev_t *dev, int addr, + u32 *buf); + int (*write_byte)(struct instance *bus, pci_dev_t *dev, int addr, + u8 val); + int (*write_byte)(struct instance *bus, pci_dev_t *dev, int addr, + u8 val); + int (*write_dword)(struct instance *bus, pci_dev_t *dev, int addr, + u32 val); + void (*fixup_irq)(struct instance *bus, pci_dev_t *dev); + struct pci_region* (*get_region)(struct instance *, uint num); + struct pci_config_table* (*get_cfg_table)(struct instance *bus); + uint (*get_option)(struct instance * bus, enum pci_option_code op); + } + + enum pci_option_code { + PCI_OPT_BUS_NUMBER=0, + PCI_OPT_REGION_COUNT, + PCI_OPT_INDIRECT_TYPE, + PCI_OPT_AUTO_MEM, + PCI_OPT_AUTO_IO, + PCI_OPT_AUTO_PREFETCH, + PCI_OPT_AUTO_FB, + PCI_OPT_CURRENT_BUS, + PCI_OPT_CFG_ADDR, + } + + The return value for get_option will be an unsigned integer value for any + option code. If the option currently is a pointer to pci_region, it will + return an index for get_region function. Special case has to be made for + PCI_OPT_CFG_ADDR, which should be interpreted as a pointer, but it is only + used for equality in find_hose_by_cfg_addr, and thus can be returned as an + uint. Other function using cfg_addr value are read/write functions for + specific drivers (especially ops for indirect bridges), and thus have access + to private_data of the driver instance. + + The config table accessor will return a pointer to a NULL-terminated array of + pci_config_table, which is supplied by the board in platform_data, or NULL if + the board didn't specify one. This table is used to override PnP + auto-initialization, or to specific initialization functions for non-PNP + devices. + + Transparent PCI-PCI bridges will get their own driver, and will forward all + operations to operations of their parent bus. This however makes it + impossible to use instances to identify devices, as not all devices will be + directly visible to the respective bus driver. + + Init functions of controller drivers will be moved to their respective + probe() functions, in accordance to the driver model. + + The PCI core will handle all mapping functions currently found in pci.c, as + well as proxy functions for read/write operations of the drivers. The PCI + core will also handle bus scanning and device configuration. + + The PnP helper functions currently in pci_auto.c will also be a part of PCI + core, but they will be exposed only to PCI controller drivers, not to other + device drivers. + + The PCI API for device drivers will remain largely unchanged, most drivers + will require no changes at all, and all modifications will be limited to + changing the pci_controlle into instance*. + +III) Analysis of in-tree drivers +-------------------------------- + + A) drivers in drivers/pci/ + -------------------------- + + 1) pci_indirect.c + ----------------- + Shared driver for indirect PCI bridges, several CONFIG macros - will + require significant cleanup. + + 2) pci_ixp.c + ------------ + Standard driver, specifies all read/write functions separately. + + 3) pci_sh4.c + ------------ + Shared init function for SH4 drivers, uses dword for read/write ops. + + 4) pci_sh7751.c + --------------- + Standard driver, uses SH4 shared init. + + 5) pci_sh7780.c + --------------- + Standard driver, uses SH4 shared init. + + 6) tsi108_pci.c + --------------- + Standard driver, uses dword for read/write ops. + + 7) fsl_pci_init.c + ----------------- + Driver for PCI and PCI-e, uses indirect functions. + + 8) pci_ftpci100.c + ----------------- + Standard driver, uses indirect functions, has separate scan/setup + functions. + + B) driver in arch/ + ------------------ + + 1) x86/lib/pci_type1.c + ---------------------- + Standard driver, specifies all read/write functions separately. + + 2) m68k/cpu/mcf5445x/pci.c + -------------------------- + Standard driver, specifies all read/write functions separately. + + 3) m68k/cpu/mcf547x_8x/pci.c + ---------------------------- + Standard driver, specifies all read/write functions separately. + + 4) powerpc/cpu/mpc824x/pci.c + ---------------------------- + Standard driver, uses indirect functions, does not setup HW. + + 5) powerpc/cpu/mpc8260/pci.c + ---------------------------- + Standard driver, uses indirect functions. + + 6) powerpc/cpu/ppc4xx/4xx_pci.c + ------------------------------- + Standard driver, uses indirect functions. + + 7) powerpc/cpu/ppc4xx/4xx_pcie.c + -------------------------------- + PCI-e driver, specifies all read/write functions separately. + + 8) powerpc/cpu/mpc83xx/pci.c + ---------------------------- + Standard driver, uses indirect functions. + + 9) powerpc/cpu/mpc83xx/pcie.c + ----------------------------- + PCI-e driver, specifies all read/write functions separately. + + 10) powerpc/cpu/mpc5xxx/pci_mpc5200.c + ------------------------------------- + Standard driver, uses dword for read/write ops. + + 11) powerpc/cpu/mpc512x/pci.c + ----------------------------- + Standard driver, uses indirect functions. + + 12) powerpc/cpu/mpc8220/pci.c + ----------------------------- + Standard driver, specifies all read/write functions separately. + + 13) powerpc/cpu/mpc85xx/pci.c + ----------------------------- + Standard driver, uses indirect functions, has two busses. + + C) drivers in board/ + -------------------- + + 1) eltec/elppc/pci.c + -------------------- + Standard driver, uses indirect functions. + + 2) amirix/ap1000/pci.c + ---------------------- + Standard driver, specifies all read/write functions separately. + + 3) prodrive/p3mx/pci.c + ---------------------- + Standard driver, uses dword for read/write ops, has two busses. + + 4) esd/cpci750/pci.c + -------------------- + Standard driver, uses dword for read/write ops, has two busses. + + 5) esd/common/pci.c + ------------------- + Standard driver, uses dword for read/write ops. + + 6) dave/common/pci.c + -------------------- + Standard driver, uses dword for read/write ops. + + 7) ppmc7xx/pci.c + ---------------- + Standard driver, uses indirect functions. + + 8) pcippc2/cpc710_pci.c + ----------------------- + Standard driver, uses indirect functions, has two busses. + + 9) Marvell/db64360/pci.c + ------------------------ + Standard driver, uses dword for read/write ops, has two busses. + + 10) Marvell/db64460/pci.c + ------------------------- + Standard driver, uses dword for read/write ops, has two busses. + + 11) evb64260/pci.c + ------------------ + Standard driver, uses dword for read/write ops, has two busses. + + 12) armltd/integrator/pci.c + --------------------------- + Standard driver, specifies all read/write functions separately. + + All drivers will be moved to drivers/pci. Several drivers seem + similar/identical, especially those located under board, and may be merged + into one.