From: Pali Rohár Date: Fri, 6 May 2022 09:05:15 +0000 (+0200) Subject: serial: Add new config option SPL_DEBUG_UART_BASE X-Git-Tag: v2022.07~51^2~7 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9f971ff71498a34f533e341a7e0d00ec75d9fc5b;p=platform%2Fkernel%2Fu-boot.git serial: Add new config option SPL_DEBUG_UART_BASE SPL_DEBUG_UART_BASE is same as DEBUG_UART_BASE, but applies only for SPL. In some cases base address of UART is different in SPL and proper U-Boot. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese --- diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 26fa498..46726d7 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -508,6 +508,13 @@ config DEBUG_UART_BASE A default should be provided by your board, but if not you will need to use the correct value here. +config SPL_DEBUG_UART_BASE + hex "Base address of UART for SPL" + depends on SPL && DEBUG_UART + default DEBUG_UART_BASE + help + This is the base address of your UART for memory-mapped UARTs for SPL. + config DEBUG_UART_CLOCK int "UART input clock" depends on DEBUG_UART