From: Bartlomiej Zolnierkiewicz Date: Fri, 11 Dec 2009 20:23:14 +0000 (-0800) Subject: Staging: rt28x0: fix comments in *.c files X-Git-Tag: v2.6.33-rc2~13^2~92 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9f548a2a3dd8feca99f7301df474f983c1e815f3;p=profile%2Fivi%2Fkernel-x86-ivi.git Staging: rt28x0: fix comments in *.c files Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rt2860/chips/rt3070.c b/drivers/staging/rt2860/chips/rt3070.c index eb3b214..4a62087 100644 --- a/drivers/staging/rt2860/chips/rt3070.c +++ b/drivers/staging/rt2860/chips/rt3070.c @@ -41,18 +41,18 @@ #ifndef RTMP_RF_RW_SUPPORT #error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip" -#endif // RTMP_RF_RW_SUPPORT // +#endif /* RTMP_RF_RW_SUPPORT // */ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd) { INT i; UCHAR RFValue; - // Driver must read EEPROM to get RfIcType before initial RF registers - // Initialize RF register to default value + /* Driver must read EEPROM to get RfIcType before initial RF registers */ + /* Initialize RF register to default value */ if (IS_RT3070(pAd) || IS_RT3071(pAd)) { - // Init RF calibration - // Driver should toggle RF R30 bit7 before init RF registers + /* Init RF calibration */ + /* Driver should toggle RF R30 bit7 before init RF registers */ UINT32 RfReg = 0; UINT32 data; @@ -63,38 +63,38 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd) RfReg &= 0x7F; RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR) RfReg); - // Initialize RF register to default value + /* Initialize RF register to default value */ for (i = 0; i < NUM_RF_REG_PARMS; i++) { RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); } - // add by johnli + /* add by johnli */ if (IS_RT3070(pAd)) { - // - // The DAC issue(LDO_CFG0) has been fixed in RT3070(F). - // The voltage raising patch is no longer needed for RT3070(F) - // + /* */ + /* The DAC issue(LDO_CFG0) has been fixed in RT3070(F). */ + /* The voltage raising patch is no longer needed for RT3070(F) */ + /* */ if ((pAd->MACVersion & 0xffff) < 0x0201) { - // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate + /* Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate */ RTUSBReadMACRegister(pAd, LDO_CFG0, &data); data = ((data & 0xF0FFFFFF) | 0x0D000000); RTUSBWriteMACRegister(pAd, LDO_CFG0, data); } } else if (IS_RT3071(pAd)) { - // Driver should set RF R6 bit6 on before init RF registers + /* Driver should set RF R6 bit6 on before init RF registers */ RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR) & RfReg); RfReg |= 0x40; RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR) RfReg); - // init R31 + /* init R31 */ RT30xxWriteRFRegister(pAd, RF_R31, 0x14); - // RT3071 version E has fixed this issue + /* RT3071 version E has fixed this issue */ if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) { - // patch tx EVM issue temporarily + /* patch tx EVM issue temporarily */ RTUSBReadMACRegister(pAd, LDO_CFG0, &data); data = ((data & 0xE0FFFFFF) | 0x0D000000); RTUSBWriteMACRegister(pAd, LDO_CFG0, data); @@ -104,35 +104,35 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd) RTMP_IO_WRITE32(pAd, LDO_CFG0, data); } - // patch LNA_PE_G1 failed issue + /* patch LNA_PE_G1 failed issue */ RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data); data &= ~(0x20); RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data); } - //For RF filter Calibration + /*For RF filter Calibration */ RTMPFilterCalibration(pAd); - // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() - // - // TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). - // Raising RF voltage is no longer needed for RT3070(F) - // + /* Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() */ + /* */ + /* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */ + /* Raising RF voltage is no longer needed for RT3070(F) */ + /* */ if ((IS_RT3070(pAd)) && ((pAd->MACVersion & 0xffff) < 0x0201)) { RT30xxWriteRFRegister(pAd, RF_R27, 0x3); } else if ((IS_RT3071(pAd)) && ((pAd->MACVersion & 0xffff) < 0x0211)) { RT30xxWriteRFRegister(pAd, RF_R27, 0x3); } - // set led open drain enable + /* set led open drain enable */ RTUSBReadMACRegister(pAd, OPT_14, &data); data |= 0x01; RTUSBWriteMACRegister(pAd, OPT_14, data); - // move from RT30xxLoadRFNormalModeSetup because it's needed for both RT3070 and RT3071 - // TX_LO1_en, RF R17 register Bit 3 to 0 + /* move from RT30xxLoadRFNormalModeSetup because it's needed for both RT3070 and RT3071 */ + /* TX_LO1_en, RF R17 register Bit 3 to 0 */ RT30xxReadRFRegister(pAd, RF_R17, &RFValue); RFValue &= (~0x08); - // to fix rx long range issue + /* to fix rx long range issue */ if (pAd->NicConfig2.field.ExternalLNAForG == 0) { if ((IS_RT3071(pAd) && ((pAd->MACVersion & 0xffff) >= 0x0211)) @@ -140,22 +140,22 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd) RFValue |= 0x20; } } - // set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h + /* set RF_R17_bit[2:0] equal to EEPROM setting at 0x48h */ if (pAd->TxMixerGain24G >= 1) { - RFValue &= (~0x7); // clean bit [2:0] + RFValue &= (~0x7); /* clean bit [2:0] */ RFValue |= pAd->TxMixerGain24G; } RT30xxWriteRFRegister(pAd, RF_R17, RFValue); if (IS_RT3071(pAd)) { - // add by johnli, RF power sequence setup, load RF normal operation-mode setup + /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */ RT30xxLoadRFNormalModeSetup(pAd); } else if (IS_RT3070(pAd)) { /* add by johnli, reset RF_R27 when interface down & up to fix throughput problem */ - // LDORF_VC, RF R27 register Bit 2 to 0 + /* LDORF_VC, RF R27 register Bit 2 to 0 */ RT30xxReadRFRegister(pAd, RF_R27, &RFValue); - // TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). - // Raising RF voltage is no longer needed for RT3070(F) + /* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */ + /* Raising RF voltage is no longer needed for RT3070(F) */ if ((pAd->MACVersion & 0xffff) < 0x0201) RFValue = (RFValue & (~0x77)) | 0x3; else @@ -166,4 +166,4 @@ VOID NICInitRT3070RFRegisters(IN PRTMP_ADAPTER pAd) } } -#endif // RT3070 // +#endif /* RT3070 // */ diff --git a/drivers/staging/rt2860/chips/rt3090.c b/drivers/staging/rt2860/chips/rt3090.c index 1435294..cedacfb 100644 --- a/drivers/staging/rt2860/chips/rt3090.c +++ b/drivers/staging/rt2860/chips/rt3090.c @@ -41,16 +41,16 @@ #ifndef RTMP_RF_RW_SUPPORT #error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip" -#endif // RTMP_RF_RW_SUPPORT // +#endif /* RTMP_RF_RW_SUPPORT // */ VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd) { INT i; - // Driver must read EEPROM to get RfIcType before initial RF registers - // Initialize RF register to default value + /* Driver must read EEPROM to get RfIcType before initial RF registers */ + /* Initialize RF register to default value */ if (IS_RT3090(pAd)) { - // Init RF calibration - // Driver should toggle RF R30 bit7 before init RF registers + /* Init RF calibration */ + /* Driver should toggle RF R30 bit7 before init RF registers */ UINT32 RfReg = 0, data; RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR) & RfReg); @@ -60,14 +60,14 @@ VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd) RfReg &= 0x7F; RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR) RfReg); - // init R24, R31 + /* init R24, R31 */ RT30xxWriteRFRegister(pAd, RF_R24, 0x0F); RT30xxWriteRFRegister(pAd, RF_R31, 0x0F); - // RT309x version E has fixed this issue + /* RT309x version E has fixed this issue */ if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) { - // patch tx EVM issue temporarily + /* patch tx EVM issue temporarily */ RTMP_IO_READ32(pAd, LDO_CFG0, &data); data = ((data & 0xE0FFFFFF) | 0x0D000000); RTMP_IO_WRITE32(pAd, LDO_CFG0, data); @@ -77,43 +77,43 @@ VOID NICInitRT3090RFRegisters(IN PRTMP_ADAPTER pAd) RTMP_IO_WRITE32(pAd, LDO_CFG0, data); } - // patch LNA_PE_G1 failed issue + /* patch LNA_PE_G1 failed issue */ RTMP_IO_READ32(pAd, GPIO_SWITCH, &data); data &= ~(0x20); RTMP_IO_WRITE32(pAd, GPIO_SWITCH, data); - // Initialize RF register to default value + /* Initialize RF register to default value */ for (i = 0; i < NUM_RF_REG_PARMS; i++) { RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); } - // Driver should set RF R6 bit6 on before calibration + /* Driver should set RF R6 bit6 on before calibration */ RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR) & RfReg); RfReg |= 0x40; RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR) RfReg); - //For RF filter Calibration + /*For RF filter Calibration */ RTMPFilterCalibration(pAd); - // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() + /* Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() */ if ((pAd->MACVersion & 0xffff) < 0x0211) RT30xxWriteRFRegister(pAd, RF_R27, 0x3); - // set led open drain enable + /* set led open drain enable */ RTMP_IO_READ32(pAd, OPT_14, &data); data |= 0x01; RTMP_IO_WRITE32(pAd, OPT_14, data); - // set default antenna as main + /* set default antenna as main */ if (pAd->RfIcType == RFIC_3020) AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); - // add by johnli, RF power sequence setup, load RF normal operation-mode setup + /* add by johnli, RF power sequence setup, load RF normal operation-mode setup */ RT30xxLoadRFNormalModeSetup(pAd); } } -#endif // RT3090 // +#endif /* RT3090 // */ diff --git a/drivers/staging/rt2860/chips/rt30xx.c b/drivers/staging/rt2860/chips/rt30xx.c index 940f731..b03d94d 100644 --- a/drivers/staging/rt2860/chips/rt30xx.c +++ b/drivers/staging/rt2860/chips/rt30xx.c @@ -39,13 +39,13 @@ #ifndef RTMP_RF_RW_SUPPORT #error "You Should Enable compile flag RTMP_RF_RW_SUPPORT for this chip" -#endif // RTMP_RF_RW_SUPPORT // +#endif /* RTMP_RF_RW_SUPPORT // */ #include "../rt_config.h" -// -// RF register initialization set -// +/* */ +/* RF register initialization set */ +/* */ REG_PAIR RT30xx_RFRegTable[] = { {RF_R04, 0x40} , @@ -89,12 +89,12 @@ REG_PAIR RT30xx_RFRegTable[] = { UCHAR NUM_RF_REG_PARMS = (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR)); -// Antenna divesity use GPIO3 and EESK pin for control -// Antenna and EEPROM access are both using EESK pin, -// Therefor we should avoid accessing EESK at the same time -// Then restore antenna after EEPROM access -// The original name of this function is AsicSetRxAnt(), now change to -//VOID AsicSetRxAnt( +/* Antenna divesity use GPIO3 and EESK pin for control */ +/* Antenna and EEPROM access are both using EESK pin, */ +/* Therefor we should avoid accessing EESK at the same time */ +/* Then restore antenna after EEPROM access */ +/* The original name of this function is AsicSetRxAnt(), now change to */ +/*VOID AsicSetRxAnt( */ VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant) { UINT32 Value; @@ -109,16 +109,16 @@ VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant) (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) { return; } - // the antenna selection is through firmware and MAC register(GPIO3) + /* the antenna selection is through firmware and MAC register(GPIO3) */ if (Ant == 0) { - // Main antenna + /* Main antenna */ #ifdef RTMP_MAC_PCI RTMP_IO_READ32(pAd, E2PROM_CSR, &x); x |= (EESK); RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); #else AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x1, 0x0); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value); Value &= ~(0x0808); @@ -126,14 +126,14 @@ VOID RT30xxSetRxAnt(IN PRTMP_ADAPTER pAd, IN UCHAR Ant) DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to main antenna\n")); } else { - // Aux antenna + /* Aux antenna */ #ifdef RTMP_MAC_PCI RTMP_IO_READ32(pAd, E2PROM_CSR, &x); x &= ~(EESK); RTMP_IO_WRITE32(pAd, E2PROM_CSR, x); #else AsicSendCommandToMcu(pAd, 0x73, 0xFF, 0x0, 0x0); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &Value); Value &= ~(0x0808); Value |= 0x08; @@ -165,14 +165,14 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd) UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0; UCHAR RF_R24_Value = 0; - // Give bbp filter initial value + /* Give bbp filter initial value */ pAd->Mlme.CaliBW20RfR24 = 0x1F; - pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40 + pAd->Mlme.CaliBW40RfR24 = 0x2F; /*Bit[5] must be 1 for BW 40 */ do { - if (loop == 1) //BandWidth = 40 MHz + if (loop == 1) /*BandWidth = 40 MHz */ { - // Write 0x27 to RF_R24 to program filter + /* Write 0x27 to RF_R24 to program filter */ RF_R24_Value = 0x27; RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) @@ -180,19 +180,19 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd) else FilterTarget = 0x19; - // when calibrate BW40, BBP mask must set to BW40. + /* when calibrate BW40, BBP mask must set to BW40. */ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); BBPValue |= (0x10); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - // set to BW40 + /* set to BW40 */ RT30xxReadRFRegister(pAd, RF_R31, &value); value |= 0x20; RT30xxWriteRFRegister(pAd, RF_R31, value); - } else //BandWidth = 20 MHz + } else /*BandWidth = 20 MHz */ { - // Write 0x07 to RF_R24 to program filter + /* Write 0x07 to RF_R24 to program filter */ RF_R24_Value = 0x07; RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) @@ -200,39 +200,39 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd) else FilterTarget = 0x16; - // set to BW20 + /* set to BW20 */ RT30xxReadRFRegister(pAd, RF_R31, &value); value &= (~0x20); RT30xxWriteRFRegister(pAd, RF_R31, value); } - // Write 0x01 to RF_R22 to enable baseband loopback mode + /* Write 0x01 to RF_R22 to enable baseband loopback mode */ RT30xxReadRFRegister(pAd, RF_R22, &value); value |= 0x01; RT30xxWriteRFRegister(pAd, RF_R22, value); - // Write 0x00 to BBP_R24 to set power & frequency of passband test tone + /* Write 0x00 to BBP_R24 to set power & frequency of passband test tone */ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); do { - // Write 0x90 to BBP_R25 to transmit test tone + /* Write 0x90 to BBP_R25 to transmit test tone */ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); RTMPusecDelay(1000); - // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] + /* Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] */ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); R55x = value & 0xFF; } while ((ReTry++ < 100) && (R55x == 0)); - // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone + /* Write 0x06 to BBP_R24 to set power & frequency of stopband test tone */ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06); while (TRUE) { - // Write 0x90 to BBP_R25 to transmit test tone + /* Write 0x90 to BBP_R25 to transmit test tone */ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); - //We need to wait for calibration + /*We need to wait for calibration */ RTMPusecDelay(1000); RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); value &= 0xFF; @@ -245,27 +245,27 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd) break; } - // prevent infinite loop cause driver hang. + /* prevent infinite loop cause driver hang. */ if (loopcnt++ > 100) { DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt)); break; } - // Write RF_R24 to program filter + /* Write RF_R24 to program filter */ RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); } if (count > 0) { RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0)); } - // Store for future usage + /* Store for future usage */ if (loopcnt < 100) { if (loop++ == 0) { - //BandWidth = 20 MHz + /*BandWidth = 20 MHz */ pAd->Mlme.CaliBW20RfR24 = (UCHAR) RF_R24_Value; } else { - //BandWidth = 40 MHz + /*BandWidth = 40 MHz */ pAd->Mlme.CaliBW40RfR24 = (UCHAR) RF_R24_Value; break; } @@ -274,20 +274,20 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd) RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); - // reset count + /* reset count */ count = 0; } while (TRUE); - // - // Set back to initial state - // + /* */ + /* Set back to initial state */ + /* */ RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); RT30xxReadRFRegister(pAd, RF_R22, &value); value &= ~(0x01); RT30xxWriteRFRegister(pAd, RF_R22, value); - // set BBP back to BW20 + /* set BBP back to BW20 */ RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); BBPValue &= (~0x18); RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); @@ -297,7 +297,7 @@ VOID RTMPFilterCalibration(IN PRTMP_ADAPTER pAd) pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24)); } -// add by johnli, RF power sequence setup +/* add by johnli, RF power sequence setup */ /* ========================================================================== Description: @@ -310,12 +310,12 @@ VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd) { UCHAR RFValue; - // RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1 + /* RX0_PD & TX0_PD, RF R1 register Bit 2 & Bit 3 to 0 and RF_BLOCK_en,RX1_PD & TX1_PD, Bit0, Bit 4 & Bit5 to 1 */ RT30xxReadRFRegister(pAd, RF_R01, &RFValue); RFValue = (RFValue & (~0x0C)) | 0x31; RT30xxWriteRFRegister(pAd, RF_R01, RFValue); - // TX_LO2_en, RF R15 register Bit 3 to 0 + /* TX_LO2_en, RF R15 register Bit 3 to 0 */ RT30xxReadRFRegister(pAd, RF_R15, &RFValue); RFValue &= (~0x08); RT30xxWriteRFRegister(pAd, RF_R15, RFValue); @@ -338,22 +338,22 @@ VOID RT30xxLoadRFNormalModeSetup(IN PRTMP_ADAPTER pAd) RT30xxWriteRFRegister(pAd, RF_R17, RFValue); */ - // RX_LO1_en, RF R20 register Bit 3 to 0 + /* RX_LO1_en, RF R20 register Bit 3 to 0 */ RT30xxReadRFRegister(pAd, RF_R20, &RFValue); RFValue &= (~0x08); RT30xxWriteRFRegister(pAd, RF_R20, RFValue); - // RX_LO2_en, RF R21 register Bit 3 to 0 + /* RX_LO2_en, RF R21 register Bit 3 to 0 */ RT30xxReadRFRegister(pAd, RF_R21, &RFValue); RFValue &= (~0x08); RT30xxWriteRFRegister(pAd, RF_R21, RFValue); /* add by johnli, reset RF_R27 when interface down & up to fix throughput problem */ - // LDORF_VC, RF R27 register Bit 2 to 0 + /* LDORF_VC, RF R27 register Bit 2 to 0 */ RT30xxReadRFRegister(pAd, RF_R27, &RFValue); - // TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). - // Raising RF voltage is no longer needed for RT3070(F) - if (IS_RT3090(pAd)) // RT309x and RT3071/72 + /* TX to RX IQ glitch(RF_R27) has been fixed in RT3070(F). */ + /* Raising RF voltage is no longer needed for RT3070(F) */ + if (IS_RT3090(pAd)) /* RT309x and RT3071/72 */ { if ((pAd->MACVersion & 0xffff) < 0x0211) RFValue = (RFValue & (~0x77)) | 0x3; @@ -379,35 +379,35 @@ VOID RT30xxLoadRFSleepModeSetup(IN PRTMP_ADAPTER pAd) #ifdef RTMP_MAC_USB if (!IS_RT3572(pAd)) -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ { - // RF_BLOCK_en. RF R1 register Bit 0 to 0 + /* RF_BLOCK_en. RF R1 register Bit 0 to 0 */ RT30xxReadRFRegister(pAd, RF_R01, &RFValue); RFValue &= (~0x01); RT30xxWriteRFRegister(pAd, RF_R01, RFValue); - // VCO_IC, RF R7 register Bit 4 & Bit 5 to 0 + /* VCO_IC, RF R7 register Bit 4 & Bit 5 to 0 */ RT30xxReadRFRegister(pAd, RF_R07, &RFValue); RFValue &= (~0x30); RT30xxWriteRFRegister(pAd, RF_R07, RFValue); - // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0 + /* Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 0 */ RT30xxReadRFRegister(pAd, RF_R09, &RFValue); RFValue &= (~0x0E); RT30xxWriteRFRegister(pAd, RF_R09, RFValue); - // RX_CTB_en, RF R21 register Bit 7 to 0 + /* RX_CTB_en, RF R21 register Bit 7 to 0 */ RT30xxReadRFRegister(pAd, RF_R21, &RFValue); RFValue &= (~0x80); RT30xxWriteRFRegister(pAd, RF_R21, RFValue); } - if (IS_RT3090(pAd) || // IS_RT3090 including RT309x and RT3071/72 + if (IS_RT3090(pAd) || /* IS_RT3090 including RT309x and RT3071/72 */ IS_RT3572(pAd) || (IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201))) { #ifdef RTMP_MAC_USB if (!IS_RT3572(pAd)) -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ { RT30xxReadRFRegister(pAd, RF_R27, &RFValue); RFValue |= 0x77; @@ -435,36 +435,36 @@ VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd) #ifdef RTMP_MAC_USB if (!IS_RT3572(pAd)) -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ { - // RF_BLOCK_en, RF R1 register Bit 0 to 1 + /* RF_BLOCK_en, RF R1 register Bit 0 to 1 */ RT30xxReadRFRegister(pAd, RF_R01, &RFValue); RFValue |= 0x01; RT30xxWriteRFRegister(pAd, RF_R01, RFValue); - // VCO_IC, RF R7 register Bit 4 & Bit 5 to 1 + /* VCO_IC, RF R7 register Bit 4 & Bit 5 to 1 */ RT30xxReadRFRegister(pAd, RF_R07, &RFValue); RFValue |= 0x30; RT30xxWriteRFRegister(pAd, RF_R07, RFValue); - // Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1 + /* Idoh, RF R9 register Bit 1, Bit 2 & Bit 3 to 1 */ RT30xxReadRFRegister(pAd, RF_R09, &RFValue); RFValue |= 0x0E; RT30xxWriteRFRegister(pAd, RF_R09, RFValue); - // RX_CTB_en, RF R21 register Bit 7 to 1 + /* RX_CTB_en, RF R21 register Bit 7 to 1 */ RT30xxReadRFRegister(pAd, RF_R21, &RFValue); RFValue |= 0x80; RT30xxWriteRFRegister(pAd, RF_R21, RFValue); } - if (IS_RT3090(pAd) || // IS_RT3090 including RT309x and RT3071/72 + if (IS_RT3090(pAd) || /* IS_RT3090 including RT309x and RT3071/72 */ IS_RT3572(pAd) || IS_RT3390(pAd) || (IS_RT3070(pAd) && ((pAd->MACVersion & 0xffff) < 0x0201))) { #ifdef RTMP_MAC_USB if (!IS_RT3572(pAd)) -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ { RT30xxReadRFRegister(pAd, RF_R27, &RFValue); if ((pAd->MACVersion & 0xffff) < 0x0211) @@ -473,10 +473,10 @@ VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd) RFValue = (RFValue & (~0x77)); RT30xxWriteRFRegister(pAd, RF_R27, RFValue); } - // RT3071 version E has fixed this issue + /* RT3071 version E has fixed this issue */ if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) { - // patch tx EVM issue temporarily + /* patch tx EVM issue temporarily */ RTMP_IO_READ32(pAd, LDO_CFG0, &MACValue); MACValue = ((MACValue & 0xE0FFFFFF) | 0x0D000000); RTMP_IO_WRITE32(pAd, LDO_CFG0, MACValue); @@ -491,22 +491,22 @@ VOID RT30xxReverseRFSleepModeSetup(IN PRTMP_ADAPTER pAd) RT30xxWriteRFRegister(pAd, RF_R08, 0x80); } -// end johnli +/* end johnli */ VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd) { UINT32 TxPinCfg = 0x00050F0F; - // - // Turn off LNA_PE or TRSW_POL - // + /* */ + /* Turn off LNA_PE or TRSW_POL */ + /* */ if (IS_RT3070(pAd) || IS_RT3071(pAd) || IS_RT3572(pAd)) { if ((IS_RT3071(pAd) || IS_RT3572(pAd)) #ifdef RTMP_EFUSE_SUPPORT && (pAd->bUseEfuse) -#endif // RTMP_EFUSE_SUPPORT // +#endif /* RTMP_EFUSE_SUPPORT // */ ) { - TxPinCfg &= 0xFFFBF0F0; // bit18 off + TxPinCfg &= 0xFFFBF0F0; /* bit18 off */ } else { TxPinCfg &= 0xFFFFF0F0; } @@ -515,4 +515,4 @@ VOID RT30xxHaltAction(IN PRTMP_ADAPTER pAd) } } -#endif // RT30xx // +#endif /* RT30xx // */ diff --git a/drivers/staging/rt2860/pci_main_dev.c b/drivers/staging/rt2860/pci_main_dev.c index 2a22e45..76c71f1 100644 --- a/drivers/staging/rt2860/pci_main_dev.c +++ b/drivers/staging/rt2860/pci_main_dev.c @@ -38,17 +38,17 @@ #include "rt_config.h" #include -// Following information will be show when you run 'modinfo' -// *** If you have a solution for the bug in current version of driver, please mail to me. -// Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** +/* Following information will be show when you run 'modinfo' */ +/* *** If you have a solution for the bug in current version of driver, please mail to me. */ +/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */ MODULE_AUTHOR("Jett Chen "); MODULE_DESCRIPTION("RT2860/RT3090 Wireless Lan Linux Driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("rt3090sta"); -// -// Function declarations -// +/* */ +/* Function declarations */ +/* */ extern int rt28xx_close(IN struct net_device *net_dev); extern int rt28xx_open(struct net_device *net_dev); @@ -64,14 +64,14 @@ static VOID RTMPInitPCIeDevice(IN struct pci_dev *pci_dev, #ifdef CONFIG_PM static int rt2860_suspend(struct pci_dev *pci_dev, pm_message_t state); static int rt2860_resume(struct pci_dev *pci_dev); -#endif // CONFIG_PM // +#endif /* CONFIG_PM // */ -// -// Ralink PCI device table, include all supported chipsets -// +/* */ +/* Ralink PCI device table, include all supported chipsets */ +/* */ static struct pci_device_id rt2860_pci_tbl[] __devinitdata = { #ifdef RT2860 - {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2860_PCI_DEVICE_ID)}, //RT28602.4G + {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2860_PCI_DEVICE_ID)}, /*RT28602.4G */ {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2860_PCIe_DEVICE_ID)}, {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2760_PCI_DEVICE_ID)}, {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC2790_PCIe_DEVICE_ID)}, @@ -88,13 +88,13 @@ static struct pci_device_id rt2860_pci_tbl[] __devinitdata = { {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3090_PCIe_DEVICE_ID)}, {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3091_PCIe_DEVICE_ID)}, {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3092_PCIe_DEVICE_ID)}, -#endif // RT3090 // +#endif /* RT3090 // */ #ifdef RT3390 {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3390_PCIe_DEVICE_ID)}, {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3391_PCIe_DEVICE_ID)}, {PCI_DEVICE(NIC_PCI_VENDOR_ID, NIC3392_PCIe_DEVICE_ID)}, -#endif // RT3390 // - {0,} // terminate list +#endif /* RT3390 // */ + {0,} /* terminate list */ }; MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl); @@ -102,9 +102,9 @@ MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl); MODULE_VERSION(STA_DRIVER_VERSION); #endif -// -// Our PCI driver structure -// +/* */ +/* Our PCI driver structure */ +/* */ static struct pci_driver rt2860_driver = { name: "rt2860", id_table:rt2860_pci_tbl, @@ -125,8 +125,8 @@ resume:rt2860_resume, VOID RT2860RejectPendingPackets(IN PRTMP_ADAPTER pAd) { - // clear PS packets - // clear TxSw packets + /* clear PS packets */ + /* clear TxSw packets */ } static int rt2860_suspend(struct pci_dev *pci_dev, pm_message_t state) @@ -146,33 +146,33 @@ static int rt2860_suspend(struct pci_dev *pci_dev, pm_message_t state) /* and 1 suspend/resume function for 1 module, not for each interface */ /* so Linux will call suspend/resume function once */ if (VIRTUAL_IF_NUM(pAd) > 0) { - // avoid users do suspend after interface is down + /* avoid users do suspend after interface is down */ - // stop interface + /* stop interface */ netif_carrier_off(net_dev); netif_stop_queue(net_dev); - // mark device as removed from system and therefore no longer available + /* mark device as removed from system and therefore no longer available */ netif_device_detach(net_dev); - // mark halt flag + /* mark halt flag */ RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); - // take down the device + /* take down the device */ rt28xx_close((PNET_DEV) net_dev); RT_MOD_DEC_USE_COUNT(); } } - // reference to http://vovo2000.com/type-lab/linux/kernel-api/linux-kernel-api.html - // enable device to generate PME# when suspended - // pci_choose_state(): Choose the power state of a PCI device to be suspended + /* reference to http://vovo2000.com/type-lab/linux/kernel-api/linux-kernel-api.html */ + /* enable device to generate PME# when suspended */ + /* pci_choose_state(): Choose the power state of a PCI device to be suspended */ retval = pci_enable_wake(pci_dev, pci_choose_state(pci_dev, state), 1); - // save the PCI configuration space of a device before suspending + /* save the PCI configuration space of a device before suspending */ pci_save_state(pci_dev); - // disable PCI device after use + /* disable PCI device after use */ pci_disable_device(pci_dev); retval = pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); @@ -187,22 +187,22 @@ static int rt2860_resume(struct pci_dev *pci_dev) PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) NULL; INT32 retval; - // set the power state of a PCI device - // PCI has 4 power states, DO (normal) ~ D3(less power) - // in include/linux/pci.h, you can find that - // #define PCI_D0 ((pci_power_t __force) 0) - // #define PCI_D1 ((pci_power_t __force) 1) - // #define PCI_D2 ((pci_power_t __force) 2) - // #define PCI_D3hot ((pci_power_t __force) 3) - // #define PCI_D3cold ((pci_power_t __force) 4) - // #define PCI_UNKNOWN ((pci_power_t __force) 5) - // #define PCI_POWER_ERROR ((pci_power_t __force) -1) + /* set the power state of a PCI device */ + /* PCI has 4 power states, DO (normal) ~ D3(less power) */ + /* in include/linux/pci.h, you can find that */ + /* #define PCI_D0 ((pci_power_t __force) 0) */ + /* #define PCI_D1 ((pci_power_t __force) 1) */ + /* #define PCI_D2 ((pci_power_t __force) 2) */ + /* #define PCI_D3hot ((pci_power_t __force) 3) */ + /* #define PCI_D3cold ((pci_power_t __force) 4) */ + /* #define PCI_UNKNOWN ((pci_power_t __force) 5) */ + /* #define PCI_POWER_ERROR ((pci_power_t __force) -1) */ retval = pci_set_power_state(pci_dev, PCI_D0); - // restore the saved state of a PCI device + /* restore the saved state of a PCI device */ pci_restore_state(pci_dev); - // initialize device before it's used by a driver + /* initialize device before it's used by a driver */ if (pci_enable_device(pci_dev)) { printk("pci enable fail!\n"); return 0; @@ -220,16 +220,16 @@ static int rt2860_resume(struct pci_dev *pci_dev) /* and 1 suspend/resume function for 1 module, not for each interface */ /* so Linux will call suspend/resume function once */ if (VIRTUAL_IF_NUM(pAd) > 0) { - // mark device as attached from system and restart if needed + /* mark device as attached from system and restart if needed */ netif_device_attach(net_dev); if (rt28xx_open((PNET_DEV) net_dev) != 0) { - // open fail + /* open fail */ DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_resume()\n")); return 0; } - // increase MODULE use count + /* increase MODULE use count */ RT_MOD_INC_USE_COUNT(); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); @@ -244,16 +244,16 @@ static int rt2860_resume(struct pci_dev *pci_dev) DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_resume()\n")); return 0; } -#endif // CONFIG_PM // +#endif /* CONFIG_PM // */ static INT __init rt2860_init_module(VOID) { return pci_register_driver(&rt2860_driver); } -// -// Driver module unload function -// +/* */ +/* Driver module unload function */ +/* */ static VOID __exit rt2860_cleanup_module(VOID) { pci_unregister_driver(&rt2860_driver); @@ -262,9 +262,9 @@ static VOID __exit rt2860_cleanup_module(VOID) module_init(rt2860_init_module); module_exit(rt2860_cleanup_module); -// -// PCI device probe & initialization function -// +/* */ +/* PCI device probe & initialization function */ +/* */ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev, IN const struct pci_device_id *pci_id) { @@ -278,8 +278,8 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev, DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_probe\n")); -//PCIDevInit============================================== - // wake up and enable device +/*PCIDevInit============================================== */ + /* wake up and enable device */ if ((rv = pci_enable_device(pci_dev)) != 0) { DBGPRINT(RT_DEBUG_ERROR, ("Enable PCI device failed, errno=%d!\n", rv)); @@ -293,7 +293,7 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev, ("Request PCI resource failed, errno=%d!\n", rv)); goto err_out; } - // map physical address to virtual address for accessing register + /* map physical address to virtual address for accessing register */ csr_addr = (unsigned long)ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); @@ -310,11 +310,11 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev, (ULONG) csr_addr, pci_dev->irq)); } - // Set DMA master + /* Set DMA master */ pci_set_master(pci_dev); -//RtmpDevInit============================================== - // Allocate RTMP_ADAPTER adapter structure +/*RtmpDevInit============================================== */ + /* Allocate RTMP_ADAPTER adapter structure */ handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL); if (handle == NULL) { DBGPRINT(RT_DEBUG_ERROR, @@ -325,25 +325,25 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev, ((POS_COOKIE) handle)->pci_dev = pci_dev; - rv = RTMPAllocAdapterBlock(handle, &pAd); //shiang: we may need the pci_dev for allocate structure of "RTMP_ADAPTER" + rv = RTMPAllocAdapterBlock(handle, &pAd); /*shiang: we may need the pci_dev for allocate structure of "RTMP_ADAPTER" */ if (rv != NDIS_STATUS_SUCCESS) goto err_out_iounmap; - // Here are the RTMP_ADAPTER structure with pci-bus specific parameters. + /* Here are the RTMP_ADAPTER structure with pci-bus specific parameters. */ pAd->CSRBaseAddress = (PUCHAR) csr_addr; DBGPRINT(RT_DEBUG_ERROR, ("pAd->CSRBaseAddress =0x%lx, csr_addr=0x%lx!\n", (ULONG) pAd->CSRBaseAddress, csr_addr)); RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_PCI); -//NetDevInit============================================== +/*NetDevInit============================================== */ net_dev = RtmpPhyNetDevInit(pAd, &netDevHook); if (net_dev == NULL) goto err_out_free_radev; - // Here are the net_device structure with pci-bus specific parameters. - net_dev->irq = pci_dev->irq; // Interrupt IRQ number - net_dev->base_addr = csr_addr; // Save CSR virtual address and irq to device structure - pci_set_drvdata(pci_dev, net_dev); // Set driver data + /* Here are the net_device structure with pci-bus specific parameters. */ + net_dev->irq = pci_dev->irq; /* Interrupt IRQ number */ + net_dev->base_addr = csr_addr; /* Save CSR virtual address and irq to device structure */ + pci_set_drvdata(pci_dev, net_dev); /* Set driver data */ /* for supporting Network Manager */ /* Set the sysfs physical device reference for the network logical device @@ -351,8 +351,8 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev, */ SET_NETDEV_DEV(net_dev, &(pci_dev->dev)); -//All done, it's time to register the net device to linux kernel. - // Register this device +/*All done, it's time to register the net device to linux kernel. */ + /* Register this device */ rv = RtmpOSNetDevAttach(net_dev, &netDevHook); if (rv) goto err_out_free_netdev; @@ -362,7 +362,7 @@ static INT __devinit rt2860_probe(IN struct pci_dev *pci_dev, DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2860_probe\n")); - return 0; // probe ok + return 0; /* probe ok */ /* --------------------------- ERROR HANDLE --------------------------- */ err_out_free_netdev: @@ -393,39 +393,39 @@ static VOID __devexit rt2860_remove_one(IN struct pci_dev *pci_dev) { PNET_DEV net_dev = pci_get_drvdata(pci_dev); RTMP_ADAPTER *pAd = NULL; - ULONG csr_addr = net_dev->base_addr; // pAd->CSRBaseAddress; + ULONG csr_addr = net_dev->base_addr; /* pAd->CSRBaseAddress; */ GET_PAD_FROM_NET_DEV(pAd, net_dev); DBGPRINT(RT_DEBUG_TRACE, ("===> rt2860_remove_one\n")); if (pAd != NULL) { - // Unregister/Free all allocated net_device. + /* Unregister/Free all allocated net_device. */ RtmpPhyNetDevExit(pAd, net_dev); - // Unmap CSR base address + /* Unmap CSR base address */ iounmap((char *)(csr_addr)); - // release memory region + /* release memory region */ release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); - // Free RTMP_ADAPTER related structures. + /* Free RTMP_ADAPTER related structures. */ RtmpRaDevCtrlExit(pAd); } else { - // Unregister network device + /* Unregister network device */ RtmpOSNetDevDetach(net_dev); - // Unmap CSR base address + /* Unmap CSR base address */ iounmap((char *)(net_dev->base_addr)); - // release memory region + /* release memory region */ release_mem_region(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); } - // Free the root net_device + /* Free the root net_device */ RtmpOSNetDevFree(net_dev); } @@ -475,7 +475,7 @@ static VOID RTMPInitPCIeDevice(IN struct pci_dev *pci_dev, IN PRTMP_ADAPTER pAd) (device_id == NIC3090_PCIe_DEVICE_ID) || (device_id == NIC3091_PCIe_DEVICE_ID) || (device_id == NIC3092_PCIe_DEVICE_ID) || -#endif // RT3090 // +#endif /* RT3090 // */ 0) { UINT32 MacCsr0 = 0, Index = 0; do { @@ -487,8 +487,8 @@ static VOID RTMPInitPCIeDevice(IN struct pci_dev *pci_dev, IN PRTMP_ADAPTER pAd) RTMPusecDelay(10); } while (Index++ < 100); - // Support advanced power save after 2892/2790. - // MAC version at offset 0x1000 is 0x2872XXXX/0x2870XXXX(PCIe, USB, SDIO). + /* Support advanced power save after 2892/2790. */ + /* MAC version at offset 0x1000 is 0x2872XXXX/0x2870XXXX(PCIe, USB, SDIO). */ if ((MacCsr0 & 0xffff0000) != 0x28600000) { OPSTATUS_SET_FLAG(pAd, fOP_STATUS_PCIE_DEVICE); } @@ -509,7 +509,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) return; DBGPRINT(RT_DEBUG_TRACE, ("%s.===>\n", __func__)); - // Init EEPROM, and save settings + /* Init EEPROM, and save settings */ if (!(IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd))) { RT28xx_EEPROM_READ16(pAd, 0x22, PCIePowerSaveLevel); pAd->PCIePowerSaveLevel = PCIePowerSaveLevel & 0xff; @@ -541,16 +541,16 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) PCIePowerSaveLevel &= 0xff; PCIePowerSaveLevel = PCIePowerSaveLevel >> 6; switch (PCIePowerSaveLevel) { - case 0: // Only support L0 + case 0: /* Only support L0 */ pAd->LnkCtrlBitMask = 0; break; - case 1: // Only enable L0s + case 1: /* Only enable L0s */ pAd->LnkCtrlBitMask = 1; break; - case 2: // enable L1, L0s + case 2: /* enable L1, L0s */ pAd->LnkCtrlBitMask = 3; break; - case 3: // sync with host clk and enable L1, L0s + case 3: /* sync with host clk and enable L1, L0s */ pAd->LnkCtrlBitMask = 0x103; break; } @@ -580,7 +580,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) } else if (IS_RT3090(pAd) || IS_RT3572(pAd) || IS_RT3390(pAd)) { UCHAR LinkCtrlSetting = 0; - // Check 3090E special setting chip. + /* Check 3090E special setting chip. */ RT28xx_EEPROM_READ16(pAd, 0x24, data2); if ((data2 == 0x9280) && ((pAd->MACVersion & 0xffff) == 0x0211)) { pAd->b3090ESpecialChip = TRUE; @@ -588,37 +588,37 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) } RTMP_IO_READ32(pAd, AUX_CTRL, &MacValue); - //enable WAKE_PCIE function, which forces to enable PCIE clock when mpu interrupt asserting. - //Force PCIE 125MHz CLK to toggle + /*enable WAKE_PCIE function, which forces to enable PCIE clock when mpu interrupt asserting. */ + /*Force PCIE 125MHz CLK to toggle */ MacValue |= 0x402; RTMP_IO_WRITE32(pAd, AUX_CTRL, MacValue); DBGPRINT_RAW(RT_DEBUG_ERROR, (" AUX_CTRL = 0x%32x\n", MacValue)); - // for RT30xx F and after, PCIe infterface, and for power solution 3 + /* for RT30xx F and after, PCIe infterface, and for power solution 3 */ if ((IS_VERSION_AFTER_F(pAd)) && (pAd->StaCfg.PSControl.field.rt30xxPowerMode >= 2) && (pAd->StaCfg.PSControl.field.rt30xxPowerMode <= 3)) { RTMP_IO_READ32(pAd, AUX_CTRL, &MacValue); DBGPRINT_RAW(RT_DEBUG_ERROR, (" Read AUX_CTRL = 0x%x\n", MacValue)); - // turn on bit 12. - //enable 32KHz clock mode for power saving + /* turn on bit 12. */ + /*enable 32KHz clock mode for power saving */ MacValue |= 0x1000; if (MacValue != 0xffffffff) { RTMP_IO_WRITE32(pAd, AUX_CTRL, MacValue); DBGPRINT_RAW(RT_DEBUG_ERROR, (" Write AUX_CTRL = 0x%x\n", MacValue)); - // 1. if use PCIePowerSetting is 2 or 3, need to program OSC_CTRL to 0x3ff11. + /* 1. if use PCIePowerSetting is 2 or 3, need to program OSC_CTRL to 0x3ff11. */ MacValue = 0x3ff11; RTMP_IO_WRITE32(pAd, OSC_CTRL, MacValue); DBGPRINT_RAW(RT_DEBUG_ERROR, (" OSC_CTRL = 0x%x\n", MacValue)); - // 2. Write PCI register Clk ref bit + /* 2. Write PCI register Clk ref bit */ RTMPrt3xSetPCIePowerLinkCtrl(pAd); } else { - // Error read Aux_Ctrl value. Force to use solution 1 + /* Error read Aux_Ctrl value. Force to use solution 1 */ DBGPRINT(RT_DEBUG_ERROR, (" Error Value in AUX_CTRL = 0x%x\n", MacValue)); @@ -627,20 +627,20 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) (" Force to use power solution1 \n")); } } - // 1. read setting from inf file. + /* 1. read setting from inf file. */ PCIePowerSaveLevel = (USHORT) pAd->StaCfg.PSControl.field.rt30xxPowerMode; DBGPRINT(RT_DEBUG_ERROR, ("====> rt30xx Read PowerLevelMode = 0x%x.\n", PCIePowerSaveLevel)); - // 2. Check EnableNewPS. + /* 2. Check EnableNewPS. */ if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE) PCIePowerSaveLevel = 1; if (IS_VERSION_BEFORE_F(pAd) && (pAd->b3090ESpecialChip == FALSE)) { - // Chip Version E only allow 1, So force set 1. + /* Chip Version E only allow 1, So force set 1. */ PCIePowerSaveLevel &= 0x1; pAd->PCIePowerSaveLevel = (USHORT) PCIePowerSaveLevel; DBGPRINT(RT_DEBUG_TRACE, @@ -650,7 +650,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) AsicSendCommandToMcu(pAd, 0x83, 0xff, (UCHAR) PCIePowerSaveLevel, 0x00); } else { - // Chip Version F and after only allow 1 or 2 or 3. This might be modified after new chip version come out. + /* Chip Version F and after only allow 1 or 2 or 3. This might be modified after new chip version come out. */ if (! ((PCIePowerSaveLevel == 1) || (PCIePowerSaveLevel == 3))) @@ -659,8 +659,8 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) ("====> rt30xx F Write 0x83 Command = 0x%x.\n", PCIePowerSaveLevel)); pAd->PCIePowerSaveLevel = (USHORT) PCIePowerSaveLevel; - // for 3090F , we need to add high-byte arg for 0x83 command to indicate the link control setting in - // PCI Configuration Space. Because firmware can't read PCI Configuration Space + /* for 3090F , we need to add high-byte arg for 0x83 command to indicate the link control setting in */ + /* PCI Configuration Space. Because firmware can't read PCI Configuration Space */ if ((pAd->Rt3xxRalinkLinkCtrl & 0x2) && (pAd->Rt3xxHostLinkCtrl & 0x2)) { LinkCtrlSetting = 1; @@ -673,11 +673,11 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) LinkCtrlSetting); } } - // Find Ralink PCIe Device's Express Capability Offset + /* Find Ralink PCIe Device's Express Capability Offset */ pos = pci_find_capability(pObj->pci_dev, PCI_CAP_ID_EXP); if (pos != 0) { - // Ralink PCIe Device's Link Control Register Offset + /* Ralink PCIe Device's Link Control Register Offset */ pAd->RLnkCtrlOffset = pos + PCI_EXP_LNKCTL; pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset, ®16); @@ -698,7 +698,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) ("Write (Ralink PCIe Link Control Register) offset 0x%x = 0x%x\n", pos + PCI_EXP_LNKCTL, Configuration)); } -#endif // RT2860 // +#endif /* RT2860 // */ RTMPFindHostPCIDev(pAd); if (pObj->parent_pci_dev) { @@ -711,14 +711,14 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) bFindIntel = TRUE; RTMP_SET_PSFLAG(pAd, fRTMP_PS_TOGGLE_L1); } - // Find PCI-to-PCI Bridge Express Capability Offset + /* Find PCI-to-PCI Bridge Express Capability Offset */ pos = pci_find_capability(pObj->parent_pci_dev, PCI_CAP_ID_EXP); if (pos != 0) { BOOLEAN bChange = FALSE; - // PCI-to-PCI Bridge Link Control Register Offset + /* PCI-to-PCI Bridge Link Control Register Offset */ pAd->HostLnkCtrlOffset = pos + PCI_EXP_LNKCTL; pci_read_config_word(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, @@ -739,7 +739,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) case NIC2790_PCIe_DEVICE_ID: bChange = TRUE; break; -#endif // RT2860 // +#endif /* RT2860 // */ #ifdef RT3090 case NIC3090_PCIe_DEVICE_ID: case NIC3091_PCIe_DEVICE_ID: @@ -747,7 +747,7 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) if (bFindIntel == FALSE) bChange = TRUE; break; -#endif // RT3090 // +#endif /* RT3090 // */ default: break; } @@ -782,14 +782,14 @@ VOID RTMPInitPCIeLinkCtrlValue(IN PRTMP_ADAPTER pAd) if (bFindIntel == FALSE) { DBGPRINT(RT_DEBUG_TRACE, ("Doesn't find Intel PCI host controller. \n")); - // Doesn't switch L0, L1, So set PCIePowerSaveLevel to 0xff + /* Doesn't switch L0, L1, So set PCIePowerSaveLevel to 0xff */ pAd->PCIePowerSaveLevel = 0xff; if ((pAd->RLnkCtrlOffset != 0) #ifdef RT3090 && ((pObj->DeviceID == NIC3090_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC3091_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC3092_PCIe_DEVICE_ID)) -#endif // RT3090 // +#endif /* RT3090 // */ ) { pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset, ®16); @@ -871,20 +871,20 @@ VOID RTMPPCIeLinkCtrlValueRestore(IN PRTMP_ADAPTER pAd, IN UCHAR Level) if (!((pObj->DeviceID == NIC2860_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC2790_PCIe_DEVICE_ID))) return; -#endif // RT2860 // - // Check PSControl Configuration +#endif /* RT2860 // */ + /* Check PSControl Configuration */ if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE) return; - //3090 will not execute the following codes. - // Check interface : If not PCIe interface, return. + /*3090 will not execute the following codes. */ + /* Check interface : If not PCIe interface, return. */ #ifdef RT3090 if ((pObj->DeviceID == NIC3090_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC3091_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC3092_PCIe_DEVICE_ID)) return; -#endif // RT3090 // +#endif /* RT3090 // */ DBGPRINT(RT_DEBUG_TRACE, ("%s.===>\n", __func__)); PCIePowerSaveLevel = pAd->PCIePowerSaveLevel; @@ -898,7 +898,7 @@ VOID RTMPPCIeLinkCtrlValueRestore(IN PRTMP_ADAPTER pAd, IN UCHAR Level) Configuration); if ((Configuration != 0) && (Configuration != 0xFFFF)) { Configuration &= 0xfefc; - // If call from interface down, restore to orginial setting. + /* If call from interface down, restore to orginial setting. */ if (Level == RESTORE_CLOSE) { Configuration |= pAd->HostLnkCtrlConfiguration; } else @@ -920,7 +920,7 @@ VOID RTMPPCIeLinkCtrlValueRestore(IN PRTMP_ADAPTER pAd, IN UCHAR Level) Configuration); if ((Configuration != 0) && (Configuration != 0xFFFF)) { Configuration &= 0xfefc; - // If call from interface down, restore to orginial setting. + /* If call from interface down, restore to orginial setting. */ if (Level == RESTORE_CLOSE) Configuration |= pAd->RLnkCtrlConfiguration; else @@ -965,20 +965,20 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max) if (!((pObj->DeviceID == NIC2860_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC2790_PCIe_DEVICE_ID))) return; -#endif // RT2860 // - // Check PSControl Configuration +#endif /* RT2860 // */ + /* Check PSControl Configuration */ if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE) return; - // Check interface : If not PCIe interface, return. - //Block 3090 to enter the following function + /* Check interface : If not PCIe interface, return. */ + /*Block 3090 to enter the following function */ #ifdef RT3090 if ((pObj->DeviceID == NIC3090_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC3091_PCIe_DEVICE_ID) || (pObj->DeviceID == NIC3092_PCIe_DEVICE_ID)) return; -#endif // RT3090 // +#endif /* RT3090 // */ if (!RTMP_TEST_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP)) { DBGPRINT(RT_DEBUG_INFO, ("RTMPPCIePowerLinkCtrl return on fRTMP_PS_CAN_GO_SLEEP flag\n")); @@ -993,27 +993,27 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max) } PCIePowerSaveLevel = PCIePowerSaveLevel >> 6; - // Skip non-exist deice right away + /* Skip non-exist deice right away */ if (pObj->parent_pci_dev && (pAd->HostLnkCtrlOffset != 0)) { PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, Configuration); switch (PCIePowerSaveLevel) { case 0: - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00 + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00 */ Configuration &= 0xfefc; break; case 1: - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01 + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01 */ Configuration &= 0xfefc; Configuration |= 0x1; break; case 2: - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 */ Configuration &= 0xfefc; Configuration |= 0x3; break; case 3: - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1 + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1 */ Configuration &= 0xfefc; Configuration |= 0x103; break; @@ -1026,7 +1026,7 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max) } if (pObj->pci_dev && (pAd->RLnkCtrlOffset != 0)) { - // first 2892 chip not allow to frequently set mode 3. will cause hang problem. + /* first 2892 chip not allow to frequently set mode 3. will cause hang problem. */ if (PCIePowerSaveLevel > Max) PCIePowerSaveLevel = Max; @@ -1034,25 +1034,25 @@ VOID RTMPPCIeLinkCtrlSetting(IN PRTMP_ADAPTER pAd, IN USHORT Max) Configuration); switch (PCIePowerSaveLevel) { case 0: - // No PCI power safe - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00 . + /* No PCI power safe */ + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 00 . */ Configuration &= 0xfefc; break; case 1: - // L0 - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01 . + /* L0 */ + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 01 . */ Configuration &= 0xfefc; Configuration |= 0x1; break; case 2: - // L0 and L1 - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 + /* L0 and L1 */ + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 */ Configuration &= 0xfefc; Configuration |= 0x3; break; case 3: - // L0 , L1 and clock management. - // Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1 + /* L0 , L1 and clock management. */ + /* Set b0 and b1 of LinkControl (both 2892 and PCIe bridge) to 11 and bit 8 of LinkControl of 2892 to 1 */ Configuration &= 0xfefc; Configuration |= 0x103; pAd->bPCIclkOff = TRUE; @@ -1091,35 +1091,35 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(IN PRTMP_ADAPTER pAd) ("RTMPrt3xSetPCIePowerLinkCtrl.===> %lx\n", pAd->StaCfg.PSControl.word)); - // Check PSControl Configuration + /* Check PSControl Configuration */ if (pAd->StaCfg.PSControl.field.EnableNewPS == FALSE) return; RTMPFindHostPCIDev(pAd); if (pObj->parent_pci_dev) { - // Find PCI-to-PCI Bridge Express Capability Offset + /* Find PCI-to-PCI Bridge Express Capability Offset */ pos = pci_find_capability(pObj->parent_pci_dev, PCI_CAP_ID_EXP); if (pos != 0) { pAd->HostLnkCtrlOffset = pos + PCI_EXP_LNKCTL; } - // If configurared to turn on L1. + /* If configurared to turn on L1. */ HostConfiguration = 0; if (pAd->StaCfg.PSControl.field.rt30xxForceASPMTest == 1) { DBGPRINT(RT_DEBUG_TRACE, ("Enter,PSM : Force ASPM \n")); - // Skip non-exist deice right away + /* Skip non-exist deice right away */ if ((pAd->HostLnkCtrlOffset != 0)) { PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, HostConfiguration); - // Prepare Configuration to write to Host + /* Prepare Configuration to write to Host */ HostConfiguration |= 0x3; PCI_REG_WIRTE_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, HostConfiguration); pAd->Rt3xxHostLinkCtrl = HostConfiguration; - // Because in rt30xxForceASPMTest Mode, Force turn on L0s, L1. - // Fix HostConfiguration bit0:1 = 0x3 for later use. + /* Because in rt30xxForceASPMTest Mode, Force turn on L0s, L1. */ + /* Fix HostConfiguration bit0:1 = 0x3 for later use. */ HostConfiguration = 0x3; DBGPRINT(RT_DEBUG_TRACE, ("PSM : Force ASPM : " @@ -1129,7 +1129,7 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(IN PRTMP_ADAPTER pAd) } else if (pAd->StaCfg.PSControl.field.rt30xxFollowHostASPM == 1) { - // Skip non-exist deice right away + /* Skip non-exist deice right away */ if ((pAd->HostLnkCtrlOffset != 0)) { PCI_REG_READ_WORD(pObj->parent_pci_dev, pAd->HostLnkCtrlOffset, @@ -1143,12 +1143,12 @@ VOID RTMPrt3xSetPCIePowerLinkCtrl(IN PRTMP_ADAPTER pAd) } } } - // Prepare to write Ralink setting. - // Find Ralink PCIe Device's Express Capability Offset + /* Prepare to write Ralink setting. */ + /* Find Ralink PCIe Device's Express Capability Offset */ pos = pci_find_capability(pObj->pci_dev, PCI_CAP_ID_EXP); if (pos != 0) { - // Ralink PCIe Device's Link Control Register Offset + /* Ralink PCIe Device's Link Control Register Offset */ pAd->RLnkCtrlOffset = pos + PCI_EXP_LNKCTL; pci_read_config_word(pObj->pci_dev, pAd->RLnkCtrlOffset, ®16); diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c index fd577e0..8413998 100644 --- a/drivers/staging/rt2860/rt_linux.c +++ b/drivers/staging/rt2860/rt_linux.c @@ -30,9 +30,9 @@ ULONG RTDebugLevel = RT_DEBUG_ERROR; -// for wireless system event message +/* for wireless system event message */ char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = { - // system status event + /* system status event */ "had associated successfully", /* IW_ASSOC_EVENT_FLAG */ "had disassociated", /* IW_DISASSOC_EVENT_FLAG */ "had deauthenticated", /* IW_DEAUTH_EVENT_FLAG */ @@ -54,7 +54,7 @@ char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = { "scan terminate!! Busy!! Enqueue fail!!" /* IW_SCAN_ENQUEUE_FAIL_EVENT_FLAG */ }; -// for wireless IDS_spoof_attack event message +/* for wireless IDS_spoof_attack event message */ char const *pWirelessSpoofEventText[IW_SPOOF_EVENT_TYPE_NUM] = { "detected conflict SSID", /* IW_CONFLICT_SSID_EVENT_FLAG */ "detected spoofed association response", /* IW_SPOOF_ASSOC_RESP_EVENT_FLAG */ @@ -68,7 +68,7 @@ char const *pWirelessSpoofEventText[IW_SPOOF_EVENT_TYPE_NUM] = { "detected replay attack" /* IW_REPLAY_ATTACK_EVENT_FLAG */ }; -// for wireless IDS_flooding_attack event message +/* for wireless IDS_flooding_attack event message */ char const *pWirelessFloodEventText[IW_FLOOD_EVENT_TYPE_NUM] = { "detected authentication flooding", /* IW_FLOOD_AUTH_EVENT_FLAG */ "detected association request flooding", /* IW_FLOOD_ASSOC_REQ_EVENT_FLAG */ @@ -129,10 +129,10 @@ VOID RTMP_OS_Del_Timer(IN NDIS_MINIPORT_TIMER * pTimer, VOID RTMP_OS_Release_Packet(IN PRTMP_ADAPTER pAd, IN PQUEUE_ENTRY pEntry) { - //RTMPFreeNdisPacket(pAd, (struct sk_buff *)pEntry); + /*RTMPFreeNdisPacket(pAd, (struct sk_buff *)pEntry); */ } -// Unify all delay routine by using udelay +/* Unify all delay routine by using udelay */ VOID RTMPusecDelay(IN ULONG usec) { ULONG i; @@ -149,7 +149,7 @@ void RTMP_GetCurrentSystemTime(LARGE_INTEGER * time) time->u.LowPart = jiffies; } -// pAd MUST allow to be NULL +/* pAd MUST allow to be NULL */ NDIS_STATUS os_alloc_mem(IN RTMP_ADAPTER * pAd, OUT UCHAR ** mem, IN ULONG size) { *mem = (PUCHAR) kmalloc(size, GFP_ATOMIC); @@ -159,7 +159,7 @@ NDIS_STATUS os_alloc_mem(IN RTMP_ADAPTER * pAd, OUT UCHAR ** mem, IN ULONG size) return (NDIS_STATUS_FAILURE); } -// pAd MUST allow to be NULL +/* pAd MUST allow to be NULL */ NDIS_STATUS os_free_mem(IN PRTMP_ADAPTER pAd, IN PVOID mem) { @@ -249,8 +249,8 @@ VOID RTMPFreeAdapter(IN PRTMP_ADAPTER pAd) NdisFreeSpinLock(&pAd->RxRingLock); #ifdef RT3090 NdisFreeSpinLock(&pAd->McuCmdLock); -#endif // RT3090 // -#endif // RTMP_MAC_PCI // +#endif /* RT3090 // */ +#endif /* RTMP_MAC_PCI // */ for (index = 0; index < NUM_OF_TX_RING; index++) { NdisFreeSpinLock(&pAd->TxSwQueueLock[index]); @@ -260,7 +260,7 @@ VOID RTMPFreeAdapter(IN PRTMP_ADAPTER pAd) NdisFreeSpinLock(&pAd->irq_lock); - vfree(pAd); // pci_free_consistent(os_cookie->pci_dev,sizeof(RTMP_ADAPTER),pAd,os_cookie->pAd_pa); + vfree(pAd); /* pci_free_consistent(os_cookie->pci_dev,sizeof(RTMP_ADAPTER),pAd,os_cookie->pAd_pa); */ if (os_cookie) kfree(os_cookie); } @@ -303,7 +303,7 @@ NDIS_STATUS RTMPCloneNdisPacket(IN PRTMP_ADAPTER pAd, ASSERT(pInPacket); ASSERT(ppOutPacket); - // 1. Allocate a packet + /* 1. Allocate a packet */ pkt = dev_alloc_skb(2048); if (pkt == NULL) { @@ -322,7 +322,7 @@ NDIS_STATUS RTMPCloneNdisPacket(IN PRTMP_ADAPTER pAd, return NDIS_STATUS_SUCCESS; } -// the allocated NDIS PACKET must be freed via RTMPFreeNdisPacket() +/* the allocated NDIS PACKET must be freed via RTMPFreeNdisPacket() */ NDIS_STATUS RTMPAllocateNdisPacket(IN PRTMP_ADAPTER pAd, OUT PNDIS_PACKET * ppPacket, IN PUCHAR pHeader, @@ -333,7 +333,7 @@ NDIS_STATUS RTMPAllocateNdisPacket(IN PRTMP_ADAPTER pAd, ASSERT(pData); ASSERT(DataLen); - // 1. Allocate a packet + /* 1. Allocate a packet */ pPacket = (PNDIS_PACKET *) dev_alloc_skb(HeaderLen + DataLen + RTMP_PKT_TAIL_PADDING); @@ -344,18 +344,18 @@ NDIS_STATUS RTMPAllocateNdisPacket(IN PRTMP_ADAPTER pAd, #endif return NDIS_STATUS_FAILURE; } - // 2. clone the frame content + /* 2. clone the frame content */ if (HeaderLen > 0) NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket), pHeader, HeaderLen); if (DataLen > 0) NdisMoveMemory(GET_OS_PKT_DATAPTR(pPacket) + HeaderLen, pData, DataLen); - // 3. update length of packet + /* 3. update length of packet */ skb_put(GET_OS_PKT_TYPE(pPacket), HeaderLen + DataLen); RTMP_SET_PACKET_SOURCE(pPacket, PKTSRC_NDIS); -// printk("%s : pPacket = %p, len = %d\n", __func__, pPacket, GET_OS_PKT_LEN(pPacket)); +/* printk("%s : pPacket = %p, len = %d\n", __func__, pPacket, GET_OS_PKT_LEN(pPacket)); */ *ppPacket = pPacket; return NDIS_STATUS_SUCCESS; } @@ -372,9 +372,9 @@ VOID RTMPFreeNdisPacket(IN PRTMP_ADAPTER pAd, IN PNDIS_PACKET pPacket) dev_kfree_skb_any(RTPKT_TO_OSPKT(pPacket)); } -// IRQL = DISPATCH_LEVEL -// NOTE: we do have an assumption here, that Byte0 and Byte1 always reasid at the same -// scatter gather buffer +/* IRQL = DISPATCH_LEVEL */ +/* NOTE: we do have an assumption here, that Byte0 and Byte1 always reasid at the same */ +/* scatter gather buffer */ NDIS_STATUS Sniff2BytesFromNdisBuffer(IN PNDIS_BUFFER pFirstBuffer, IN UCHAR DesiredOffset, OUT PUCHAR pByte0, OUT PUCHAR pByte1) @@ -481,7 +481,7 @@ PNDIS_PACKET duplicate_pkt_with_TKIP_MIC(IN PRTMP_ADAPTER pAd, skb = RTPKT_TO_OSPKT(pPacket); if (skb_tailroom(skb) < TKIP_TX_MIC_SIZE) { - // alloc a new skb and copy the packet + /* alloc a new skb and copy the packet */ newskb = skb_copy_expand(skb, skb_headroom(skb), TKIP_TX_MIC_SIZE, GFP_ATOMIC); @@ -507,11 +507,11 @@ PNDIS_PACKET ClonePacket(IN PRTMP_ADAPTER pAd, ASSERT(pPacket); pRxPkt = RTPKT_TO_OSPKT(pPacket); - // clone the packet + /* clone the packet */ pClonedPkt = skb_clone(pRxPkt, MEM_ALLOC_FLAG); if (pClonedPkt) { - // set the correct dataptr and data len + /* set the correct dataptr and data len */ pClonedPkt->dev = pRxPkt->dev; pClonedPkt->data = pData; pClonedPkt->len = DataSize; @@ -521,9 +521,9 @@ PNDIS_PACKET ClonePacket(IN PRTMP_ADAPTER pAd, return pClonedPkt; } -// -// change OS packet DataPtr and DataLen -// +/* */ +/* change OS packet DataPtr and DataLen */ +/* */ void update_os_packet_info(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk, IN UCHAR FromWhichBSSID) { @@ -555,10 +555,10 @@ void wlan_802_11_to_802_3_packet(IN PRTMP_ADAPTER pAd, pOSPkt->len = pRxBlk->DataSize; pOSPkt->tail = pOSPkt->data + pOSPkt->len; - // - // copy 802.3 header - // - // + /* */ + /* copy 802.3 header */ + /* */ + /* */ NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3); @@ -633,7 +633,7 @@ VOID RTMPSendWirelessEvent(IN PRTMP_ADAPTER pAd, IN PUCHAR pAddr, IN UCHAR BssIdx, IN CHAR Rssi) { - //union iwreq_data wrqu; + /*union iwreq_data wrqu; */ PSTRING pBuf = NULL, pBufPtr = NULL; USHORT event, type, BufLen; UCHAR event_table_len = 0; @@ -668,9 +668,9 @@ VOID RTMPSendWirelessEvent(IN PRTMP_ADAPTER pAd, event)); return; } - //Allocate memory and copy the msg. + /*Allocate memory and copy the msg. */ if ((pBuf = kmalloc(IW_CUSTOM_MAX_LEN, GFP_ATOMIC)) != NULL) { - //Prepare the payload + /*Prepare the payload */ memset(pBuf, 0, IW_CUSTOM_MAX_LEN); pBufPtr = pBuf; @@ -706,7 +706,7 @@ VOID RTMPSendWirelessEvent(IN PRTMP_ADAPTER pAd, RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, Event_flag, NULL, (PUCHAR) pBuf, BufLen); - //DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __func__, pBuf)); + /*DBGPRINT(RT_DEBUG_TRACE, ("%s : %s\n", __func__, pBuf)); */ kfree(pBuf); } else @@ -723,7 +723,7 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk) USHORT header_len = 0; UCHAR temp_header[40] = { 0 }; - u_int32_t ralinkrate[256] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 109, 110, 111, 112, 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, 27, 54, 81, 108, 162, 216, 243, 270, // Last 38 + u_int32_t ralinkrate[256] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 109, 110, 111, 112, 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, 27, 54, 81, 108, 162, 216, 243, 270, /* Last 38 */ 54, 108, 162, 216, 324, 432, 486, 540, 14, 29, 43, 57, 87, 115, 130, 144, 29, 59, 87, 115, 173, 230, 260, 288, 30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, @@ -761,39 +761,39 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk) else header_len = LENGTH_802_11; - // QOS + /* QOS */ if (pRxBlk->pHeader->FC.SubType & 0x08) { header_len += 2; - // Data skip QOS contorl field + /* Data skip QOS contorl field */ pRxBlk->DataSize -= 2; } - // Order bit: A-Ralink or HTC+ + /* Order bit: A-Ralink or HTC+ */ if (pRxBlk->pHeader->FC.Order) { header_len += 4; - // Data skip HTC contorl field + /* Data skip HTC contorl field */ pRxBlk->DataSize -= 4; } - // Copy Header + /* Copy Header */ if (header_len <= 40) NdisMoveMemory(temp_header, pRxBlk->pData, header_len); - // skip HW padding + /* skip HW padding */ if (pRxBlk->RxD.L2PAD) pRxBlk->pData += (header_len + 2); else pRxBlk->pData += header_len; - } //end if + } /*end if */ if (pRxBlk->DataSize < pOSPkt->len) { skb_trim(pOSPkt, pRxBlk->DataSize); } else { skb_put(pOSPkt, (pRxBlk->DataSize - pOSPkt->len)); - } //end if + } /*end if */ if ((pRxBlk->pData - pOSPkt->data) > 0) { skb_put(pOSPkt, (pRxBlk->pData - pOSPkt->data)); skb_pull(pOSPkt, (pRxBlk->pData - pOSPkt->data)); - } //end if + } /*end if */ if (skb_headroom(pOSPkt) < (sizeof(wlan_ng_prism2_header) + header_len)) { if (pskb_expand_head @@ -803,8 +803,8 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk) ("%s : Reallocate header size of sk_buff fail!\n", __func__)); goto err_free_sk_buff; - } //end if - } //end if + } /*end if */ + } /*end if */ if (header_len > 0) NdisMoveMemory(skb_push(pOSPkt, header_len), temp_header, @@ -856,7 +856,7 @@ void send_monitor_packets(IN PRTMP_ADAPTER pAd, IN RX_BLK * pRxBlk) ph->signal.did = DIDmsg_lnxind_wlansniffrm_signal; ph->signal.status = 0; ph->signal.len = 4; - ph->signal.data = 0; //rssi + noise; + ph->signal.data = 0; /*rssi + noise; */ ph->noise.did = DIDmsg_lnxind_wlansniffrm_noise; ph->noise.status = 0; @@ -948,7 +948,7 @@ int RtmpOSIRQRelease(IN PNET_DEV pNetDev) free_irq(pObj->pci_dev->irq, (net_dev)); RTMP_MSI_DISABLE(pAd); } -#endif // RTMP_PCI_SUPPORT // +#endif /* RTMP_PCI_SUPPORT // */ return 0; } @@ -985,7 +985,7 @@ void RtmpOSFileSeek(RTMP_OS_FD osfd, int offset) int RtmpOSFileRead(RTMP_OS_FD osfd, char *pDataPtr, int readLen) { - // The object must have a read method + /* The object must have a read method */ if (osfd->f_op && osfd->f_op->read) { return osfd->f_op->read(osfd, pDataPtr, readLen, &osfd->f_pos); } else { @@ -1090,7 +1090,7 @@ NDIS_STATUS RtmpOSTaskAttach(IN RTMP_OS_TASK * pTask, } else { pTask->taskPID = GET_PID(pid_number); - // Wait for the thread to start + /* Wait for the thread to start */ wait_for_completion(&pTask->taskComplete); status = NDIS_STATUS_SUCCESS; } @@ -1172,7 +1172,7 @@ int RtmpOSNetDevAddrSet(IN PNET_DEV pNetDev, IN PUCHAR pMacAddr) net_dev = pNetDev; GET_PAD_FROM_NET_DEV(pAd, net_dev); - // work-around for the SuSE due to it has it's own interface name management system. + /* work-around for the SuSE due to it has it's own interface name management system. */ { NdisZeroMemory(pAd->StaCfg.dev_name, 16); NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, @@ -1245,7 +1245,7 @@ void RtmpOSNetDevFree(PNET_DEV pNetDev) INT RtmpOSNetDevAlloc(IN PNET_DEV * new_dev_p, IN UINT32 privDataSize) { - // assign it as null first. + /* assign it as null first. */ *new_dev_p = NULL; DBGPRINT(RT_DEBUG_TRACE, @@ -1281,7 +1281,7 @@ void RtmpOSNetDeviceRefPut(PNET_DEV pNetDev) INT RtmpOSNetDevDestory(IN RTMP_ADAPTER * pAd, IN PNET_DEV pNetDev) { - // TODO: Need to fix this + /* TODO: Need to fix this */ printk("WARNING: This function(%s) not implement yet!!!\n", __func__); return 0; } @@ -1297,7 +1297,7 @@ int RtmpOSNetDevAttach(IN PNET_DEV pNetDev, int ret, rtnl_locked = FALSE; DBGPRINT(RT_DEBUG_TRACE, ("RtmpOSNetDevAttach()--->\n")); - // If we need hook some callback function to the net device structrue, now do it. + /* If we need hook some callback function to the net device structrue, now do it. */ if (pDevOpHook) { PRTMP_ADAPTER pAd = NULL; @@ -1312,7 +1312,7 @@ int RtmpOSNetDevAttach(IN PNET_DEV pNetDev, pNetDev->wireless_handlers = &rt28xx_iw_handler_def; } - // copy the net device mac address to the net_device structure. + /* copy the net device mac address to the net_device structure. */ NdisMoveMemory(pNetDev->dev_addr, &pDevOpHook->devAddr[0], MAC_ADDR_LEN); diff --git a/drivers/staging/rt2860/rt_main_dev.c b/drivers/staging/rt2860/rt_main_dev.c index 8f65e46..84be9d0 100644 --- a/drivers/staging/rt2860/rt_main_dev.c +++ b/drivers/staging/rt2860/rt_main_dev.c @@ -41,8 +41,8 @@ /* Private Variables Used */ /*---------------------------------------------------------------------*/ -PSTRING mac = ""; // default 00:00:00:00:00:00 -PSTRING hostname = ""; // default CMPC +PSTRING mac = ""; /* default 00:00:00:00:00:00 */ +PSTRING hostname = ""; /* default CMPC */ module_param(mac, charp, 0); MODULE_PARM_DESC(mac, "rt28xx: wireless mac addr"); @@ -50,11 +50,11 @@ MODULE_PARM_DESC(mac, "rt28xx: wireless mac addr"); /* Prototypes of Functions Used */ /*---------------------------------------------------------------------*/ -// public function prototype +/* public function prototype */ int rt28xx_close(IN struct net_device *net_dev); int rt28xx_open(struct net_device *net_dev); -// private function prototype +/* private function prototype */ static INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev); @@ -87,9 +87,9 @@ int MainVirtualIF_close(IN struct net_device *net_dev) GET_PAD_FROM_NET_DEV(pAd, net_dev); - // Sanity check for pAd + /* Sanity check for pAd */ if (pAd == NULL) - return 0; // close ok + return 0; /* close ok */ netif_carrier_off(pAd->net_dev); netif_stop_queue(pAd->net_dev); @@ -117,7 +117,7 @@ int MainVirtualIF_close(IN struct net_device *net_dev) sizeof (MLME_DISASSOC_REQ_STRUCT)); - // Prevent to connect AP again in STAMlmePeriodicExec + /* Prevent to connect AP again in STAMlmePeriodicExec */ pAd->MlmeAux.AutoReconnectSsidLen = 32; NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux. @@ -142,7 +142,7 @@ int MainVirtualIF_close(IN struct net_device *net_dev) RT_MOD_DEC_USE_COUNT(); - return 0; // close ok + return 0; /* close ok */ } /* @@ -171,14 +171,14 @@ int MainVirtualIF_open(IN struct net_device *net_dev) GET_PAD_FROM_NET_DEV(pAd, net_dev); - // Sanity check for pAd + /* Sanity check for pAd */ if (pAd == NULL) - return 0; // close ok + return 0; /* close ok */ if (VIRTUAL_IF_UP(pAd) != 0) return -1; - // increase MODULE use count + /* increase MODULE use count */ RT_MOD_INC_USE_COUNT(); netif_start_queue(net_dev); @@ -218,35 +218,35 @@ int rt28xx_close(IN PNET_DEV dev) #ifdef RTMP_MAC_USB DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup); DECLARE_WAITQUEUE(wait, current); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ GET_PAD_FROM_NET_DEV(pAd, net_dev); DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n")); Cancelled = FALSE; - // Sanity check for pAd + /* Sanity check for pAd */ if (pAd == NULL) - return 0; // close ok + return 0; /* close ok */ { #ifdef RTMP_MAC_PCI RTMPPCIeLinkCtrlValueRestore(pAd, RESTORE_CLOSE); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ - // If dirver doesn't wake up firmware here, - // NICLoadFirmware will hang forever when interface is up again. + /* If dirver doesn't wake up firmware here, */ + /* NICLoadFirmware will hang forever when interface is up again. */ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) { AsicForceWakeup(pAd, TRUE); } #ifdef RTMP_MAC_USB RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ MlmeRadioOff(pAd); #ifdef RTMP_MAC_PCI pAd->bPCIclkOff = FALSE; -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); @@ -261,13 +261,13 @@ int rt28xx_close(IN PNET_DEV dev) } #ifdef RTMP_MAC_USB - // ensure there are no more active urbs. + /* ensure there are no more active urbs. */ add_wait_queue(&unlink_wakeup, &wait); pAd->wait = &unlink_wakeup; - // maybe wait for deletions to finish. + /* maybe wait for deletions to finish. */ i = 0; - //while((i < 25) && atomic_read(&pAd->PendingRx) > 0) + /*while((i < 25) && atomic_read(&pAd->PendingRx) > 0) */ while (i < 25) { unsigned long IrqFlags; @@ -278,17 +278,17 @@ int rt28xx_close(IN PNET_DEV dev) } RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags); - msleep(UNLINK_TIMEOUT_MS); //Time in millisecond + msleep(UNLINK_TIMEOUT_MS); /*Time in millisecond */ i++; } pAd->wait = NULL; remove_wait_queue(&unlink_wakeup, &wait); -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ - // Stop Mlme state machine + /* Stop Mlme state machine */ MlmeHalt(pAd); - // Close net tasklets + /* Close net tasklets */ RtmpNetTaskExit(pAd); { @@ -298,25 +298,25 @@ int rt28xx_close(IN PNET_DEV dev) MeasureReqTabExit(pAd); TpcReqTabExit(pAd); - // Close kernel threads + /* Close kernel threads */ RtmpMgmtTaskExit(pAd); #ifdef RTMP_MAC_PCI { BOOLEAN brc; - // ULONG Value; + /* ULONG Value; */ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE)) { RTMP_ASIC_INTERRUPT_DISABLE(pAd); } - // Receive packets to clear DMA index after disable interrupt. - //RTMPHandleRxDoneInterrupt(pAd); - // put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all - // register access before Radio off. + /* Receive packets to clear DMA index after disable interrupt. */ + /*RTMPHandleRxDoneInterrupt(pAd); */ + /* put to radio off to save power when driver unload. After radiooff, can't write /read register. So need to finish all */ + /* register access before Radio off. */ brc = RT28xxPciAsicRadioOff(pAd, RTMP_HALT, 0); -//In solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff +/*In solution 3 of 3090F, the bPCIclkOff will be set to TRUE after calling RT28xxPciAsicRadioOff */ pAd->bPCIclkOff = FALSE; if (brc == FALSE) { @@ -335,22 +335,22 @@ int rt28xx_close(IN PNET_DEV dev) // Disable Rx, register value supposed will remain after reset NICIssueReset(pAd); */ -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ - // Free IRQ + /* Free IRQ */ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { #ifdef RTMP_MAC_PCI - // Deregister interrupt function + /* Deregister interrupt function */ RtmpOSIRQRelease(net_dev); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE); } - // Free Ring or USB buffers + /* Free Ring or USB buffers */ RTMPFreeTxRxRingMemory(pAd); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); - // Free BA reorder resource + /* Free BA reorder resource */ ba_reordering_resource_release(pAd); RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_START_UP); @@ -360,7 +360,7 @@ int rt28xx_close(IN PNET_DEV dev) } DBGPRINT(RT_DEBUG_TRACE, ("<=== rt28xx_close\n")); - return 0; // close ok + return 0; /* close ok */ } /* End of rt28xx_close */ /* @@ -383,11 +383,11 @@ int rt28xx_open(IN PNET_DEV dev) struct net_device *net_dev = (struct net_device *)dev; PRTMP_ADAPTER pAd = NULL; int retval = 0; - //POS_COOKIE pObj; + /*POS_COOKIE pObj; */ GET_PAD_FROM_NET_DEV(pAd, net_dev); - // Sanity check for pAd + /* Sanity check for pAd */ if (pAd == NULL) { /* if 1st open fail, pAd will be free; So the net_dev->ml_priv will be NULL in 2rd open */ @@ -399,52 +399,52 @@ int rt28xx_open(IN PNET_DEV dev) net_dev->wireless_handlers = (struct iw_handler_def *)&rt28xx_iw_handler_def; } - // Request interrupt service routine for PCI device - // register the interrupt routine with the os + /* Request interrupt service routine for PCI device */ + /* register the interrupt routine with the os */ RtmpOSIRQRequest(net_dev); - // Init IRQ parameters stored in pAd + /* Init IRQ parameters stored in pAd */ RTMP_IRQ_INIT(pAd); - // Chip & other init + /* Chip & other init */ if (rt28xx_init(pAd, mac, hostname) == FALSE) goto err; - // Enable Interrupt + /* Enable Interrupt */ RTMP_IRQ_ENABLE(pAd); - // Now Enable RxTx + /* Now Enable RxTx */ RTMPEnableRxTx(pAd); RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_START_UP); { UINT32 reg = 0; - RTMP_IO_READ32(pAd, 0x1300, ®); // clear garbage interrupts + RTMP_IO_READ32(pAd, 0x1300, ®); /* clear garbage interrupts */ printk("0x1300 = %08x\n", reg); } { -// u32 reg; -// UINT8 byte; -// u16 tmp; +/* u32 reg; */ +/* UINT8 byte; */ +/* u16 tmp; */ -// RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®); +/* RTMP_IO_READ32(pAd, XIFS_TIME_CFG, ®); */ -// tmp = 0x0805; -// reg = (reg & 0xffff0000) | tmp; -// RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg); +/* tmp = 0x0805; */ +/* reg = (reg & 0xffff0000) | tmp; */ +/* RTMP_IO_WRITE32(pAd, XIFS_TIME_CFG, reg); */ } #ifdef RTMP_MAC_PCI RTMPInitPCIeLinkCtrlValue(pAd); -#endif // RTMP_MAC_PCI // +#endif /* RTMP_MAC_PCI // */ return (retval); err: -//+++Add by shiang, move from rt28xx_init() to here. +/*+++Add by shiang, move from rt28xx_init() to here. */ RtmpOSIRQRelease(net_dev); -//---Add by shiang, move from rt28xx_init() to here. +/*---Add by shiang, move from rt28xx_init() to here. */ return (-1); } /* End of rt28xx_open */ @@ -463,7 +463,7 @@ PNET_DEV RtmpPhyNetDevInit(IN RTMP_ADAPTER * pAd, IN RTMP_OS_NETDEV_OP_HOOK * pNetDevHook) { struct net_device *net_dev = NULL; -// NDIS_STATUS Status; +/* NDIS_STATUS Status; */ net_dev = RtmpOSNetDevCreate(pAd, INT_MAIN, 0, sizeof(PRTMP_ADAPTER), @@ -518,16 +518,16 @@ int rt28xx_packet_xmit(struct sk_buff *skb) /* RT2870STA does this in RTMPSendPackets() */ { - // Drop send request since we are in monitor mode + /* Drop send request since we are in monitor mode */ if (MONITOR_ON(pAd)) { RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE); goto done; } } - // EapolStart size is 18 + /* EapolStart size is 18 */ if (skb->len < 14) { - //printk("bad packet size: %d\n", pkt->len); + /*printk("bad packet size: %d\n", pkt->len); */ hex_dump("bad packet", skb->data, skb->len); RELEASE_NDIS_PACKET(pAd, pPacket, NDIS_STATUS_FAILURE); goto done; @@ -577,7 +577,7 @@ static int rt28xx_send_packets(IN struct sk_buff *skb_p, return rt28xx_packet_xmit(skb_p); } -// This function will be called when query /proc +/* This function will be called when query /proc */ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev) { PRTMP_ADAPTER pAd = NULL; @@ -586,9 +586,9 @@ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev) DBGPRINT(RT_DEBUG_TRACE, ("rt28xx_get_wireless_stats --->\n")); - pAd->iw_stats.status = 0; // Status - device dependent for now + pAd->iw_stats.status = 0; /* Status - device dependent for now */ - // link quality + /* link quality */ if (pAd->OpMode == OPMODE_STA) pAd->iw_stats.qual.qual = ((pAd->Mlme.ChannelQuality * 12) / 10 + 10); @@ -603,16 +603,16 @@ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev) pAd->StaCfg.RssiSample.LastRssi2); } - pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm) + pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; /* noise level (dBm) */ pAd->iw_stats.qual.noise += 256 - 143; - pAd->iw_stats.qual.updated = 1; // Flags to know if updated + pAd->iw_stats.qual.updated = 1; /* Flags to know if updated */ #ifdef IW_QUAL_DBM - pAd->iw_stats.qual.updated |= IW_QUAL_DBM; // Level + Noise are dBm -#endif // IW_QUAL_DBM // + pAd->iw_stats.qual.updated |= IW_QUAL_DBM; /* Level + Noise are dBm */ +#endif /* IW_QUAL_DBM // */ - pAd->iw_stats.discard.nwid = 0; // Rx : Wrong nwid/essid - pAd->iw_stats.miss.beacon = 0; // Missed beacons/superframe + pAd->iw_stats.discard.nwid = 0; /* Rx : Wrong nwid/essid */ + pAd->iw_stats.miss.beacon = 0; /* Missed beacons/superframe */ DBGPRINT(RT_DEBUG_TRACE, ("<--- rt28xx_get_wireless_stats\n")); return &pAd->iw_stats; @@ -620,7 +620,7 @@ struct iw_statistics *rt28xx_get_wireless_stats(IN struct net_device *net_dev) void tbtt_tasklet(unsigned long data) { -//#define MAX_TX_IN_TBTT (16) +/*#define MAX_TX_IN_TBTT (16) */ } @@ -664,24 +664,24 @@ static struct net_device_stats *RT28xx_get_ether_stats(IN struct net_device pAd->stats.rx_dropped = 0; pAd->stats.tx_dropped = 0; - pAd->stats.multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; // multicast packets received - pAd->stats.collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; // Collision packets + pAd->stats.multicast = pAd->WlanCounters.MulticastReceivedFrameCount.QuadPart; /* multicast packets received */ + pAd->stats.collisions = pAd->Counters8023.OneCollision + pAd->Counters8023.MoreCollisions; /* Collision packets */ pAd->stats.rx_length_errors = 0; - pAd->stats.rx_over_errors = pAd->Counters8023.RxNoBuffer; // receiver ring buff overflow - pAd->stats.rx_crc_errors = 0; //pAd->WlanCounters.FCSErrorCount; // recved pkt with crc error - pAd->stats.rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; // recv'd frame alignment error - pAd->stats.rx_fifo_errors = pAd->Counters8023.RxNoBuffer; // recv'r fifo overrun - pAd->stats.rx_missed_errors = 0; // receiver missed packet + pAd->stats.rx_over_errors = pAd->Counters8023.RxNoBuffer; /* receiver ring buff overflow */ + pAd->stats.rx_crc_errors = 0; /*pAd->WlanCounters.FCSErrorCount; // recved pkt with crc error */ + pAd->stats.rx_frame_errors = pAd->Counters8023.RcvAlignmentErrors; /* recv'd frame alignment error */ + pAd->stats.rx_fifo_errors = pAd->Counters8023.RxNoBuffer; /* recv'r fifo overrun */ + pAd->stats.rx_missed_errors = 0; /* receiver missed packet */ - // detailed tx_errors + /* detailed tx_errors */ pAd->stats.tx_aborted_errors = 0; pAd->stats.tx_carrier_errors = 0; pAd->stats.tx_fifo_errors = 0; pAd->stats.tx_heartbeat_errors = 0; pAd->stats.tx_window_errors = 0; - // for cslip etc + /* for cslip etc */ pAd->stats.rx_compressed = 0; pAd->stats.tx_compressed = 0; @@ -693,7 +693,7 @@ static struct net_device_stats *RT28xx_get_ether_stats(IN struct net_device BOOLEAN RtmpPhyNetDevExit(IN RTMP_ADAPTER * pAd, IN PNET_DEV net_dev) { - // Unregister network device + /* Unregister network device */ if (net_dev != NULL) { printk ("RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=%s!\n", @@ -724,7 +724,7 @@ Note: NDIS_STATUS AdapterBlockAllocateMemory(IN PVOID handle, OUT PVOID * ppAd) { - *ppAd = (PVOID) vmalloc(sizeof(RTMP_ADAPTER)); //pci_alloc_consistent(pci_dev, sizeof(RTMP_ADAPTER), phy_addr); + *ppAd = (PVOID) vmalloc(sizeof(RTMP_ADAPTER)); /*pci_alloc_consistent(pci_dev, sizeof(RTMP_ADAPTER), phy_addr); */ if (*ppAd) { NdisZeroMemory(*ppAd, sizeof(RTMP_ADAPTER)); diff --git a/drivers/staging/rt2860/rt_pci_rbus.c b/drivers/staging/rt2860/rt_pci_rbus.c index 8ae0e3e..0f75c3f 100644 --- a/drivers/staging/rt2860/rt_pci_rbus.c +++ b/drivers/staging/rt2860/rt_pci_rbus.c @@ -51,23 +51,23 @@ static void fifo_statistic_full_tasklet(unsigned long data); /*---------------------------------------------------------------------*/ /* Symbol & Macro Definitions */ /*---------------------------------------------------------------------*/ -#define RT2860_INT_RX_DLY (1<<0) // bit 0 -#define RT2860_INT_TX_DLY (1<<1) // bit 1 -#define RT2860_INT_RX_DONE (1<<2) // bit 2 -#define RT2860_INT_AC0_DMA_DONE (1<<3) // bit 3 -#define RT2860_INT_AC1_DMA_DONE (1<<4) // bit 4 -#define RT2860_INT_AC2_DMA_DONE (1<<5) // bit 5 -#define RT2860_INT_AC3_DMA_DONE (1<<6) // bit 6 -#define RT2860_INT_HCCA_DMA_DONE (1<<7) // bit 7 -#define RT2860_INT_MGMT_DONE (1<<8) // bit 8 +#define RT2860_INT_RX_DLY (1<<0) /* bit 0 */ +#define RT2860_INT_TX_DLY (1<<1) /* bit 1 */ +#define RT2860_INT_RX_DONE (1<<2) /* bit 2 */ +#define RT2860_INT_AC0_DMA_DONE (1<<3) /* bit 3 */ +#define RT2860_INT_AC1_DMA_DONE (1<<4) /* bit 4 */ +#define RT2860_INT_AC2_DMA_DONE (1<<5) /* bit 5 */ +#define RT2860_INT_AC3_DMA_DONE (1<<6) /* bit 6 */ +#define RT2860_INT_HCCA_DMA_DONE (1<<7) /* bit 7 */ +#define RT2860_INT_MGMT_DONE (1<<8) /* bit 8 */ #define INT_RX RT2860_INT_RX_DONE -#define INT_AC0_DLY (RT2860_INT_AC0_DMA_DONE) //| RT2860_INT_TX_DLY) -#define INT_AC1_DLY (RT2860_INT_AC1_DMA_DONE) //| RT2860_INT_TX_DLY) -#define INT_AC2_DLY (RT2860_INT_AC2_DMA_DONE) //| RT2860_INT_TX_DLY) -#define INT_AC3_DLY (RT2860_INT_AC3_DMA_DONE) //| RT2860_INT_TX_DLY) -#define INT_HCCA_DLY (RT2860_INT_HCCA_DMA_DONE) //| RT2860_INT_TX_DLY) +#define INT_AC0_DLY (RT2860_INT_AC0_DMA_DONE) /*| RT2860_INT_TX_DLY) */ +#define INT_AC1_DLY (RT2860_INT_AC1_DMA_DONE) /*| RT2860_INT_TX_DLY) */ +#define INT_AC2_DLY (RT2860_INT_AC2_DMA_DONE) /*| RT2860_INT_TX_DLY) */ +#define INT_AC3_DLY (RT2860_INT_AC3_DMA_DONE) /*| RT2860_INT_TX_DLY) */ +#define INT_HCCA_DLY (RT2860_INT_HCCA_DMA_DONE) /*| RT2860_INT_TX_DLY) */ #define INT_MGMT_DLY RT2860_INT_MGMT_DONE /*************************************************************************** @@ -76,7 +76,7 @@ static void fifo_statistic_full_tasklet(unsigned long data); * Mainly for Hardware TxDesc/RxDesc/MgmtDesc, DMA Memory for TxData/RxData, etc., * **************************************************************************/ -// Function for TxDesc Memory allocation. +/* Function for TxDesc Memory allocation. */ void RTMP_AllocateTxDescMemory(IN PRTMP_ADAPTER pAd, IN UINT Index, IN ULONG Length, @@ -92,7 +92,7 @@ void RTMP_AllocateTxDescMemory(IN PRTMP_ADAPTER pAd, } -// Function for MgmtDesc Memory allocation. +/* Function for MgmtDesc Memory allocation. */ void RTMP_AllocateMgmtDescMemory(IN PRTMP_ADAPTER pAd, IN ULONG Length, IN BOOLEAN Cached, @@ -107,7 +107,7 @@ void RTMP_AllocateMgmtDescMemory(IN PRTMP_ADAPTER pAd, } -// Function for RxDesc Memory allocation. +/* Function for RxDesc Memory allocation. */ void RTMP_AllocateRxDescMemory(IN PRTMP_ADAPTER pAd, IN ULONG Length, IN BOOLEAN Cached, @@ -122,7 +122,7 @@ void RTMP_AllocateRxDescMemory(IN PRTMP_ADAPTER pAd, } -// Function for free allocated Desc Memory. +/* Function for free allocated Desc Memory. */ void RTMP_FreeDescMemory(IN PRTMP_ADAPTER pAd, IN ULONG Length, IN PVOID VirtualAddress, @@ -134,7 +134,7 @@ void RTMP_FreeDescMemory(IN PRTMP_ADAPTER pAd, PhysicalAddress); } -// Function for TxData DMA Memory allocation. +/* Function for TxData DMA Memory allocation. */ void RTMP_AllocateFirstTxBuffer(IN PRTMP_ADAPTER pAd, IN UINT Index, IN ULONG Length, @@ -305,12 +305,12 @@ static inline void rt2860_int_enable(PRTMP_ADAPTER pAd, unsigned int mode) pAd->int_disable_mask &= ~(mode); regValue = pAd->int_enable_reg & ~(pAd->int_disable_mask); - //if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) + /*if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) */ { - RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); // 1:enable + RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); /* 1:enable */ } - //else - // DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_DOZE !\n")); + /*else */ + /* DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_DOZE !\n")); */ if (regValue != 0) RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE); @@ -322,7 +322,7 @@ static inline void rt2860_int_disable(PRTMP_ADAPTER pAd, unsigned int mode) pAd->int_disable_mask |= mode; regValue = pAd->int_enable_reg & ~(pAd->int_disable_mask); - RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); // 0: disable + RTMP_IO_WRITE32(pAd, INT_MASK_CSR, regValue); /* 0: disable */ if (regValue == 0) { RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE); @@ -341,23 +341,23 @@ static void mgmt_dma_done_tasklet(unsigned long data) INT_SOURCE_CSR_STRUC IntSource; POS_COOKIE pObj; - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt + /* Do nothing if the driver is starting halt state. */ + /* This might happen when timer already been fired before cancel timer with mlmehalt */ if (RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) return; pObj = (POS_COOKIE) pAd->OS_Cookie; -// printk("mgmt_dma_done_process\n"); +/* printk("mgmt_dma_done_process\n"); */ IntSource.word = 0; IntSource.field.MgmtDmaDone = 1; pAd->int_pending &= ~INT_MGMT_DLY; RTMPHandleMgmtRingDmaDoneInterrupt(pAd); - // if you use RTMP_SEM_LOCK, sometimes kernel will hang up, no any - // bug report output + /* if you use RTMP_SEM_LOCK, sometimes kernel will hang up, no any */ + /* bug report output */ RTMP_INT_LOCK(&pAd->irq_lock, flags); /* * double check to avoid lose of interrupts @@ -380,8 +380,8 @@ static void rx_done_tasklet(unsigned long data) BOOLEAN bReschedule = 0; POS_COOKIE pObj; - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt + /* Do nothing if the driver is starting halt state. */ + /* This might happen when timer already been fired before cancel timer with mlmehalt */ if (RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) return; @@ -413,8 +413,8 @@ void fifo_statistic_full_tasklet(unsigned long data) PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) data; POS_COOKIE pObj; - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt + /* Do nothing if the driver is starting halt state. */ + /* This might happen when timer already been fired before cancel timer with mlmehalt */ if (RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) return; @@ -449,15 +449,15 @@ static void ac3_dma_done_tasklet(unsigned long data) POS_COOKIE pObj; BOOLEAN bReschedule = 0; - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt + /* Do nothing if the driver is starting halt state. */ + /* This might happen when timer already been fired before cancel timer with mlmehalt */ if (RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) return; pObj = (POS_COOKIE) pAd->OS_Cookie; -// printk("ac0_dma_done_process\n"); +/* printk("ac0_dma_done_process\n"); */ IntSource.word = 0; IntSource.field.Ac3DmaDone = 1; pAd->int_pending &= ~INT_AC3_DLY; @@ -487,8 +487,8 @@ static void ac2_dma_done_tasklet(unsigned long data) POS_COOKIE pObj; BOOLEAN bReschedule = 0; - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt + /* Do nothing if the driver is starting halt state. */ + /* This might happen when timer already been fired before cancel timer with mlmehalt */ if (RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) return; @@ -525,15 +525,15 @@ static void ac1_dma_done_tasklet(unsigned long data) POS_COOKIE pObj; BOOLEAN bReschedule = 0; - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt + /* Do nothing if the driver is starting halt state. */ + /* This might happen when timer already been fired before cancel timer with mlmehalt */ if (RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) return; pObj = (POS_COOKIE) pAd->OS_Cookie; -// printk("ac0_dma_done_process\n"); +/* printk("ac0_dma_done_process\n"); */ IntSource.word = 0; IntSource.field.Ac1DmaDone = 1; pAd->int_pending &= ~INT_AC1_DLY; @@ -563,20 +563,20 @@ static void ac0_dma_done_tasklet(unsigned long data) POS_COOKIE pObj; BOOLEAN bReschedule = 0; - // Do nothing if the driver is starting halt state. - // This might happen when timer already been fired before cancel timer with mlmehalt + /* Do nothing if the driver is starting halt state. */ + /* This might happen when timer already been fired before cancel timer with mlmehalt */ if (RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)) return; pObj = (POS_COOKIE) pAd->OS_Cookie; -// printk("ac0_dma_done_process\n"); +/* printk("ac0_dma_done_process\n"); */ IntSource.word = 0; IntSource.field.Ac0DmaDone = 1; pAd->int_pending &= ~INT_AC0_DLY; -// RTMPHandleMgmtRingDmaDoneInterrupt(pAd); +/* RTMPHandleMgmtRingDmaDoneInterrupt(pAd); */ bReschedule = RTMPHandleTxRingDmaDoneInterrupt(pAd, IntSource); RTMP_INT_LOCK(&pAd->irq_lock, flags); @@ -617,52 +617,52 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance) RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word); Or kernel will panic after ifconfig ra0 down sometimes */ - // - // Inital the Interrupt source. - // + /* */ + /* Inital the Interrupt source. */ + /* */ IntSource.word = 0x00000000L; -// McuIntSource.word = 0x00000000L; - - // - // Get the interrupt sources & saved to local variable - // - //RTMP_IO_READ32(pAd, where, &McuIntSource.word); - //RTMP_IO_WRITE32(pAd, , McuIntSource.word); - - // - // Flag fOP_STATUS_DOZE On, means ASIC put to sleep, elase means ASICK WakeUp - // And at the same time, clock maybe turned off that say there is no DMA service. - // when ASIC get to sleep. - // To prevent system hang on power saving. - // We need to check it before handle the INT_SOURCE_CSR, ASIC must be wake up. - // - // RT2661 => when ASIC is sleeping, MAC register cannot be read and written. - // RT2860 => when ASIC is sleeping, MAC register can be read and written. -// if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) +/* McuIntSource.word = 0x00000000L; */ + + /* */ + /* Get the interrupt sources & saved to local variable */ + /* */ + /*RTMP_IO_READ32(pAd, where, &McuIntSource.word); */ + /*RTMP_IO_WRITE32(pAd, , McuIntSource.word); */ + + /* */ + /* Flag fOP_STATUS_DOZE On, means ASIC put to sleep, elase means ASICK WakeUp */ + /* And at the same time, clock maybe turned off that say there is no DMA service. */ + /* when ASIC get to sleep. */ + /* To prevent system hang on power saving. */ + /* We need to check it before handle the INT_SOURCE_CSR, ASIC must be wake up. */ + /* */ + /* RT2661 => when ASIC is sleeping, MAC register cannot be read and written. */ + /* RT2860 => when ASIC is sleeping, MAC register can be read and written. */ +/* if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) */ { RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IntSource.word); - RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word); // write 1 to clear + RTMP_IO_WRITE32(pAd, INT_SOURCE_CSR, IntSource.word); /* write 1 to clear */ } -// else -// DBGPRINT(RT_DEBUG_TRACE, (">>>fOP_STATUS_DOZE<<<\n")); +/* else */ +/* DBGPRINT(RT_DEBUG_TRACE, (">>>fOP_STATUS_DOZE<<<\n")); */ -// RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IsrAfterClear); -// RTMP_IO_READ32(pAd, MCU_INT_SOURCE_CSR, &McuIsrAfterClear); -// DBGPRINT(RT_DEBUG_INFO, ("====> RTMPHandleInterrupt(ISR=%08x,Mcu ISR=%08x, After clear ISR=%08x, MCU ISR=%08x)\n", -// IntSource.word, McuIntSource.word, IsrAfterClear, McuIsrAfterClear)); +/* RTMP_IO_READ32(pAd, INT_SOURCE_CSR, &IsrAfterClear); */ +/* RTMP_IO_READ32(pAd, MCU_INT_SOURCE_CSR, &McuIsrAfterClear); */ +/* DBGPRINT(RT_DEBUG_INFO, ("====> RTMPHandleInterrupt(ISR=%08x,Mcu ISR=%08x, After clear ISR=%08x, MCU ISR=%08x)\n", */ +/* IntSource.word, McuIntSource.word, IsrAfterClear, McuIsrAfterClear)); */ - // Do nothing if Reset in progress + /* Do nothing if Reset in progress */ if (RTMP_TEST_FLAG (pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS))) { return IRQ_HANDLED; } - // - // Handle interrupt, walk through all bits - // Should start from highest priority interrupt - // The priority can be adjust by altering processing if statement - // + /* */ + /* Handle interrupt, walk through all bits */ + /* Should start from highest priority interrupt */ + /* The priority can be adjust by altering processing if statement */ + /* */ #ifdef DBG @@ -670,11 +670,11 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance) pAd->bPCIclkOff = FALSE; - // If required spinlock, each interrupt service routine has to acquire - // and release itself. - // + /* If required spinlock, each interrupt service routine has to acquire */ + /* and release itself. */ + /* */ - // Do nothing if NIC doesn't exist + /* Do nothing if NIC doesn't exist */ if (IntSource.word == 0xffffffff) { RTMP_SET_FLAG(pAd, (fRTMP_ADAPTER_NIC_NOT_EXIST | diff --git a/drivers/staging/rt2860/rt_usb.c b/drivers/staging/rt2860/rt_usb.c index 30fc4bb..e4668dc 100644 --- a/drivers/staging/rt2860/rt_usb.c +++ b/drivers/staging/rt2860/rt_usb.c @@ -138,15 +138,15 @@ VOID RtmpMgmtTaskExit(IN RTMP_ADAPTER * pAd) INT ret; RTMP_OS_TASK *pTask; - // Sleep 50 milliseconds so pending io might finish normally + /* Sleep 50 milliseconds so pending io might finish normally */ RTMPusecDelay(50000); - // We want to wait until all pending receives and sends to the - // device object. We cancel any - // irps. Wait until sends and receives have stopped. + /* We want to wait until all pending receives and sends to the */ + /* device object. We cancel any */ + /* irps. Wait until sends and receives have stopped. */ RTUSBCancelPendingIRPs(pAd); - // We need clear timerQ related structure before exits of the timer thread. + /* We need clear timerQ related structure before exits of the timer thread. */ RtmpTimerQExit(pAd); /* Terminate Mlme Thread */ @@ -172,7 +172,7 @@ VOID RtmpMgmtTaskExit(IN RTMP_ADAPTER * pAd) pAd->CmdQ.CmdQState = RTMP_TASK_STAT_STOPED; NdisReleaseSpinLock(&pAd->CmdQLock); mb(); - //RTUSBCMDUp(pAd); + /*RTUSBCMDUp(pAd); */ ret = RtmpOSTaskKill(pTask); if (ret == NDIS_STATUS_FAILURE) { DBGPRINT(RT_DEBUG_ERROR, ("%s: kill task(%s) failed!\n", @@ -211,12 +211,12 @@ static void rtusb_dataout_complete(unsigned long data) pObj = (POS_COOKIE) pAd->OS_Cookie; Status = pUrb->status; - // Store BulkOut PipeId + /* Store BulkOut PipeId */ BulkOutPipeId = pHTTXContext->BulkOutPipeId; pAd->BulkOutDataOneSecCount++; - //DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition, - // pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); + /*DBGPRINT(RT_DEBUG_LOUD, ("Done-B(%d):I=0x%lx, CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", BulkOutPipeId, in_interrupt(), pHTTXContext->CurWritePosition, */ + /* pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); */ RTMP_IRQ_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); pAd->BulkOutPending[BulkOutPipeId] = FALSE; @@ -229,11 +229,11 @@ static void rtusb_dataout_complete(unsigned long data) RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); pAd->Counters8023.GoodTransmits++; - //RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); + /*RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */ FREE_HTTX_RING(pAd, BulkOutPipeId, pHTTXContext); - //RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); + /*RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */ - } else // STATUS_OTHER + } else /* STATUS_OTHER */ { PUCHAR pBuf; @@ -264,15 +264,15 @@ static void rtusb_dataout_complete(unsigned long data) ("\t>>BulkOut Header:%x %x %x %x %x %x %x %x\n", pBuf[0], pBuf[1], pBuf[2], pBuf[3], pBuf[4], pBuf[5], pBuf[6], pBuf[7])); - //DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOutCompleteCancel=0x%x, BulkOutCompleteOther=0x%x\n", pAd->BulkOutCompleteCancel, pAd->BulkOutCompleteOther)); + /*DBGPRINT_RAW(RT_DEBUG_ERROR, (">>BulkOutCompleteCancel=0x%x, BulkOutCompleteOther=0x%x\n", pAd->BulkOutCompleteCancel, pAd->BulkOutCompleteOther)); */ } - // - // bInUse = TRUE, means some process are filling TX data, after that must turn on bWaitingBulkOut - // bWaitingBulkOut = TRUE, means the TX data are waiting for bulk out. - // - //RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); + /* */ + /* bInUse = TRUE, means some process are filling TX data, after that must turn on bWaitingBulkOut */ + /* bWaitingBulkOut = TRUE, means the TX data are waiting for bulk out. */ + /* */ + /*RTMP_IRQ_LOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */ if ((pHTTXContext->ENextBulkOutPosition != pHTTXContext->CurWritePosition) && (pHTTXContext->ENextBulkOutPosition != @@ -280,15 +280,15 @@ static void rtusb_dataout_complete(unsigned long data) && !RTUSB_TEST_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId))) { - // Indicate There is data avaliable + /* Indicate There is data avaliable */ RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId)); } - //RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); + /*RTMP_IRQ_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags); */ - // Always call Bulk routine, even reset bulk. - // The protection of rest bulk should be in BulkOut routine + /* Always call Bulk routine, even reset bulk. */ + /* The protection of rest bulk should be in BulkOut routine */ RTUSBKickBulkOut(pAd); } @@ -305,7 +305,7 @@ static void rtusb_null_frame_done_tasklet(unsigned long data) pAd = pNullContext->pAd; Status = pUrb->status; - // Reset Null frame context flags + /* Reset Null frame context flags */ RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag); pNullContext->IRPPending = FALSE; pNullContext->InUse = FALSE; @@ -316,7 +316,7 @@ static void rtusb_null_frame_done_tasklet(unsigned long data) RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag); RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS); - } else // STATUS_OTHER + } else /* STATUS_OTHER */ { if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && @@ -336,8 +336,8 @@ static void rtusb_null_frame_done_tasklet(unsigned long data) } } - // Always call Bulk routine, even reset bulk. - // The protectioon of rest bulk should be in BulkOut routine + /* Always call Bulk routine, even reset bulk. */ + /* The protectioon of rest bulk should be in BulkOut routine */ RTUSBKickBulkOut(pAd); } @@ -354,7 +354,7 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data) pAd = pRTSContext->pAd; Status = pUrb->status; - // Reset RTS frame context flags + /* Reset RTS frame context flags */ RTMP_IRQ_LOCK(&pAd->BulkOutLock[0], irqFlag); pRTSContext->IRPPending = FALSE; pRTSContext->InUse = FALSE; @@ -362,7 +362,7 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data) if (Status == USB_ST_NOERROR) { RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], irqFlag); RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS); - } else // STATUS_OTHER + } else /* STATUS_OTHER */ { if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && @@ -385,8 +385,8 @@ static void rtusb_rts_frame_done_tasklet(unsigned long data) pAd->BulkOutPending[pRTSContext->BulkOutPipeId] = FALSE; RTMP_SEM_UNLOCK(&pAd->BulkOutLock[pRTSContext->BulkOutPipeId]); - // Always call Bulk routine, even reset bulk. - // The protectioon of rest bulk should be in BulkOut routine + /* Always call Bulk routine, even reset bulk. */ + /* The protectioon of rest bulk should be in BulkOut routine */ RTUSBKickBulkOut(pAd); } @@ -403,14 +403,14 @@ static void rtusb_pspoll_frame_done_tasklet(unsigned long data) pAd = pPsPollContext->pAd; Status = pUrb->status; - // Reset PsPoll context flags + /* Reset PsPoll context flags */ pPsPollContext->IRPPending = FALSE; pPsPollContext->InUse = FALSE; pAd->watchDogTxPendingCnt[0] = 0; if (Status == USB_ST_NOERROR) { RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS); - } else // STATUS_OTHER + } else /* STATUS_OTHER */ { if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && @@ -430,8 +430,8 @@ static void rtusb_pspoll_frame_done_tasklet(unsigned long data) pAd->BulkOutPending[0] = FALSE; RTMP_SEM_UNLOCK(&pAd->BulkOutLock[0]); - // Always call Bulk routine, even reset bulk. - // The protectioon of rest bulk should be in BulkOut routine + /* Always call Bulk routine, even reset bulk. */ + /* The protectioon of rest bulk should be in BulkOut routine */ RTUSBKickBulkOut(pAd); } @@ -467,26 +467,26 @@ static void rx_done_tasklet(unsigned long data) pRxContext->InUse = FALSE; pRxContext->IRPPending = FALSE; pRxContext->BulkInOffset += pUrb->actual_length; - //NdisInterlockedDecrement(&pAd->PendingRx); + /*NdisInterlockedDecrement(&pAd->PendingRx); */ pAd->PendingRx--; if (Status == USB_ST_NOERROR) { pAd->BulkInComplete++; pAd->NextRxBulkInPosition = 0; - if (pRxContext->BulkInOffset) // As jan's comment, it may bulk-in success but size is zero. + if (pRxContext->BulkInOffset) /* As jan's comment, it may bulk-in success but size is zero. */ { pRxContext->Readable = TRUE; INC_RING_INDEX(pAd->NextRxBulkInIndex, RX_RING_SIZE); } RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags); - } else // STATUS_OTHER + } else /* STATUS_OTHER */ { pAd->BulkInCompleteFail++; - // Still read this packet although it may comtain wrong bytes. + /* Still read this packet although it may comtain wrong bytes. */ pRxContext->Readable = FALSE; RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags); - // Parsing all packets. because after reset, the index will reset to all zero. + /* Parsing all packets. because after reset, the index will reset to all zero. */ if ((!RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_BULKIN_RESET | fRTMP_ADAPTER_HALT_IN_PROGRESS | @@ -533,7 +533,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data) RTMP_IRQ_LOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags); if (Status != USB_ST_NOERROR) { - //Bulk-Out fail status handle + /*Bulk-Out fail status handle */ if ((!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)) && @@ -541,7 +541,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data) DBGPRINT_RAW(RT_DEBUG_ERROR, ("Bulk Out MLME Failed, Status=%d!\n", Status)); - // TODO: How to handle about the MLMEBulkOut failed issue. Need to resend the mgmt pkt? + /* TODO: How to handle about the MLMEBulkOut failed issue. Need to resend the mgmt pkt? */ RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET); pAd->bulkResetPipeid = (MGMTPIPEIDX | BULKOUT_MGMT_RESET_FLAG); @@ -552,7 +552,7 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data) RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags); RTMP_IRQ_LOCK(&pAd->MLMEBulkOutLock, IrqFlags); - // Reset MLME context flags + /* Reset MLME context flags */ pMLMEContext->IRPPending = FALSE; pMLMEContext->InUse = FALSE; pMLMEContext->bWaitingBulkOut = FALSE; @@ -561,27 +561,27 @@ static void rtusb_mgmt_dma_done_tasklet(unsigned long data) pPacket = pAd->MgmtRing.Cell[index].pNdisPacket; pAd->MgmtRing.Cell[index].pNdisPacket = NULL; - // Increase MgmtRing Index + /* Increase MgmtRing Index */ INC_RING_INDEX(pAd->MgmtRing.TxDmaIdx, MGMT_RING_SIZE); pAd->MgmtRing.TxSwFreeIdx++; RTMP_IRQ_UNLOCK(&pAd->MLMEBulkOutLock, IrqFlags); - // No-matter success or fail, we free the mgmt packet. + /* No-matter success or fail, we free the mgmt packet. */ if (pPacket) RTMPFreeNdisPacket(pAd, pPacket); if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))) { - // do nothing and return directly. + /* do nothing and return directly. */ } else { - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET) && ((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG)) { // For Mgmt Bulk-Out failed, ignore it now. + if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET) && ((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG)) { /* For Mgmt Bulk-Out failed, ignore it now. */ RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, NULL, 0); } else { - // Always call Bulk routine, even reset bulk. - // The protectioon of rest bulk should be in BulkOut routine + /* Always call Bulk routine, even reset bulk. */ + /* The protectioon of rest bulk should be in BulkOut routine */ if (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE /* pMLMEContext->bWaitingBulkOut == TRUE */ ) { @@ -609,7 +609,7 @@ static void rtusb_ac3_dma_done_tasklet(unsigned long data) if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))) { - // do nothing and return directly. + /* do nothing and return directly. */ } else { if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) { RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, @@ -649,7 +649,7 @@ static void rtusb_ac2_dma_done_tasklet(unsigned long data) if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))) { - // do nothing and return directly. + /* do nothing and return directly. */ } else { if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) { RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, @@ -689,7 +689,7 @@ static void rtusb_ac1_dma_done_tasklet(unsigned long data) if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))) { - // do nothing and return directly. + /* do nothing and return directly. */ } else { if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) { RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, @@ -729,7 +729,7 @@ static void rtusb_ac0_dma_done_tasklet(unsigned long data) if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))) { - // do nothing and return directly. + /* do nothing and return directly. */ } else { if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET)) { RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_RESET_BULK_OUT, @@ -757,7 +757,7 @@ NDIS_STATUS RtmpNetTaskInit(IN RTMP_ADAPTER * pAd) { POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie; - // Create receive tasklet + /* Create receive tasklet */ tasklet_init(&pObj->rx_done_task, rx_done_tasklet, (ULONG) pAd); tasklet_init(&pObj->mgmt_dma_done_task, rtusb_mgmt_dma_done_tasklet, (unsigned long)pAd); diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c index dc1f600..d92a41e 100644 --- a/drivers/staging/rt2860/sta_ioctl.c +++ b/drivers/staging/rt2860/sta_ioctl.c @@ -61,15 +61,15 @@ typedef struct PACKED _RT_VERSION_INFO { UINT DriverBuildDay; } RT_VERSION_INFO, *PRT_VERSION_INFO; -static __s32 ralinkrate[] = { 2, 4, 11, 22, // CCK - 12, 18, 24, 36, 48, 72, 96, 108, // OFDM - 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, // 20MHz, 800ns GI, MCS: 0 ~ 15 - 39, 78, 117, 156, 234, 312, 351, 390, // 20MHz, 800ns GI, MCS: 16 ~ 23 - 27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, // 40MHz, 800ns GI, MCS: 0 ~ 15 - 81, 162, 243, 324, 486, 648, 729, 810, // 40MHz, 800ns GI, MCS: 16 ~ 23 - 14, 29, 43, 57, 87, 115, 130, 144, 29, 59, 87, 115, 173, 230, 260, 288, // 20MHz, 400ns GI, MCS: 0 ~ 15 - 43, 87, 130, 173, 260, 317, 390, 433, // 20MHz, 400ns GI, MCS: 16 ~ 23 - 30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, // 40MHz, 400ns GI, MCS: 0 ~ 15 +static __s32 ralinkrate[] = { 2, 4, 11, 22, /* CCK */ + 12, 18, 24, 36, 48, 72, 96, 108, /* OFDM */ + 13, 26, 39, 52, 78, 104, 117, 130, 26, 52, 78, 104, 156, 208, 234, 260, /* 20MHz, 800ns GI, MCS: 0 ~ 15 */ + 39, 78, 117, 156, 234, 312, 351, 390, /* 20MHz, 800ns GI, MCS: 16 ~ 23 */ + 27, 54, 81, 108, 162, 216, 243, 270, 54, 108, 162, 216, 324, 432, 486, 540, /* 40MHz, 800ns GI, MCS: 0 ~ 15 */ + 81, 162, 243, 324, 486, 648, 729, 810, /* 40MHz, 800ns GI, MCS: 16 ~ 23 */ + 14, 29, 43, 57, 87, 115, 130, 144, 29, 59, 87, 115, 173, 230, 260, 288, /* 20MHz, 400ns GI, MCS: 0 ~ 15 */ + 43, 87, 130, 173, 260, 317, 390, 433, /* 20MHz, 400ns GI, MCS: 16 ~ 23 */ + 30, 60, 90, 120, 180, 240, 270, 300, 60, 120, 180, 240, 360, 480, 540, 600, /* 40MHz, 400ns GI, MCS: 0 ~ 15 */ 90, 180, 270, 360, 540, 720, 810, 900 }; @@ -93,7 +93,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) pKey->KeyLength); goto end; } - // Update PTK + /* Update PTK */ NdisZeroMemory(&pAd->SharedKey[BSS0][0], sizeof(CIPHER_KEY)); pAd->SharedKey[BSS0][0].KeyLen = LEN_TKIP_EK; @@ -119,7 +119,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) LEN_TKIP_RXMICK); } - // Decide its ChiperAlg + /* Decide its ChiperAlg */ if (pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP; @@ -129,7 +129,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) else pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_NONE; - // Update these related information to MAC_TABLE_ENTRY + /* Update these related information to MAC_TABLE_ENTRY */ pEntry = &pAd->MacTab.Content[BSSID_WCID]; NdisMoveMemory(pEntry->PairwiseKey.Key, pAd->SharedKey[BSS0][0].Key, @@ -143,7 +143,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) pEntry->PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][0].CipherAlg; - // Update pairwise key information to ASIC Shared Key Table + /* Update pairwise key information to ASIC Shared Key Table */ AsicAddSharedKeyEntry(pAd, BSS0, 0, @@ -152,7 +152,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) pAd->SharedKey[BSS0][0].TxMic, pAd->SharedKey[BSS0][0].RxMic); - // Update ASIC WCID attribute table and IVEIV table + /* Update ASIC WCID attribute table and IVEIV table */ RTMPAddWcidAttributeEntry(pAd, BSS0, 0, @@ -160,16 +160,16 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) CipherAlg, pEntry); if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2) { - // set 802.1x port control - //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /* set 802.1x port control */ + /*pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAd); - // Indicate Connected for GUI + /* Indicate Connected for GUI */ pAd->IndicateMediaState = NdisMediaStateConnected; } } else { - // Update GTK + /* Update GTK */ pAd->StaCfg.DefaultKeyId = (pKey->KeyIndex & 0xFF); NdisZeroMemory(&pAd-> SharedKey[BSS0][pAd->StaCfg. @@ -213,7 +213,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) LEN_TKIP_RXMICK); } - // Update Shared Key CipherAlg + /* Update Shared Key CipherAlg */ pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId]. CipherAlg = CIPHER_NONE; if (pAd->StaCfg.GroupCipher == @@ -225,7 +225,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId]. CipherAlg = CIPHER_AES; - // Update group key information to ASIC Shared Key Table + /* Update group key information to ASIC Shared Key Table */ AsicAddSharedKeyEntry(pAd, BSS0, pAd->StaCfg.DefaultKeyId, @@ -242,7 +242,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) DefaultKeyId]. RxMic); - // Update ASIC WCID attribute table and IVEIV table + /* Update ASIC WCID attribute table and IVEIV table */ RTMPAddWcidAttributeEntry(pAd, BSS0, pAd->StaCfg.DefaultKeyId, @@ -251,14 +251,14 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) DefaultKeyId]. CipherAlg, NULL); - // set 802.1x port control - //pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /* set 802.1x port control */ + /*pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAd); - // Indicate Connected for GUI + /* Indicate Connected for GUI */ pAd->IndicateMediaState = NdisMediaStateConnected; } - } else // dynamic WEP from wpa_supplicant + } else /* dynamic WEP from wpa_supplicant */ { UCHAR CipherAlg; PUCHAR Key; @@ -269,7 +269,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) KeyIdx = pKey->KeyIndex & 0x0fffffff; if (KeyIdx < 4) { - // it is a default shared key, for Pairwise key setting + /* it is a default shared key, for Pairwise key setting */ if (pKey->KeyIndex & 0x80000000) { pEntry = MacTableLookup(pAd, pKey->BSSID); @@ -277,14 +277,14 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey: Set Pair-wise Key\n")); - // set key material and key length + /* set key material and key length */ pEntry->PairwiseKey.KeyLen = (UCHAR) pKey->KeyLength; NdisMoveMemory(pEntry->PairwiseKey.Key, &pKey->KeyMaterial, pKey->KeyLength); - // set Cipher type + /* set Cipher type */ if (pKey->KeyLength == 5) pEntry->PairwiseKey.CipherAlg = CIPHER_WEP64; @@ -292,7 +292,7 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) pEntry->PairwiseKey.CipherAlg = CIPHER_WEP128; - // Add Pair-wise key to Asic + /* Add Pair-wise key to Asic */ AsicAddPairwiseKeyEntry(pAd, pEntry->Addr, (UCHAR) pEntry-> @@ -300,8 +300,8 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) &pEntry-> PairwiseKey); - // update WCID attribute table and IVEIV table for this entry - RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, // The value may be not zero + /* update WCID attribute table and IVEIV table for this entry */ + RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, /* The value may be not zero */ pEntry-> PairwiseKey. CipherAlg, @@ -309,17 +309,17 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) } } else { - // Default key for tx (shared key) + /* Default key for tx (shared key) */ pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx; - // set key material and key length + /* set key material and key length */ pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength; NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, pKey->KeyLength); - // Set Ciper type + /* Set Ciper type */ if (pKey->KeyLength == 5) pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_WEP64; @@ -331,12 +331,12 @@ VOID RTMPAddKey(IN PRTMP_ADAPTER pAd, IN PNDIS_802_11_KEY pKey) pAd->SharedKey[BSS0][KeyIdx].CipherAlg; Key = pAd->SharedKey[BSS0][KeyIdx].Key; - // Set Group key material to Asic + /* Set Group key material to Asic */ AsicAddSharedKeyEntry(pAd, BSS0, KeyIdx, CipherAlg, Key, NULL, NULL); - // Update WCID attribute table and IVEIV table for this group key table + /* Update WCID attribute table and IVEIV table for this group key table */ RTMPAddWcidAttributeEntry(pAd, BSS0, KeyIdx, CipherAlg, NULL); @@ -364,8 +364,8 @@ rt_ioctl_giwname(struct net_device *dev, struct iw_request_info *info, char *name, char *extra) { strncpy(name, "Ralink STA", IFNAMSIZ); - // RT2870 2.1.0.0 uses "RT2870 Wireless" - // RT3090 2.1.0.0 uses "RT2860 Wireless" + /* RT2870 2.1.0.0 uses "RT2870 Wireless" */ + /* RT3090 2.1.0.0 uses "RT2860 Wireless" */ return 0; } @@ -378,7 +378,7 @@ int rt_ioctl_siwfreq(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -388,9 +388,9 @@ int rt_ioctl_siwfreq(struct net_device *dev, return -EINVAL; if ((freq->e == 0) && (freq->m <= 1000)) - chan = freq->m; // Setting by channel number + chan = freq->m; /* Setting by channel number */ else - MAP_KHZ_TO_CHANNEL_ID((freq->m / 100), chan); // Setting by frequency - search the table , like 2.412G, 2.422G, + MAP_KHZ_TO_CHANNEL_ID((freq->m / 100), chan); /* Setting by frequency - search the table , like 2.412G, 2.422G, */ if (ChannelSanity(pAdapter, chan) == TRUE) { pAdapter->CommonCfg.Channel = chan; @@ -430,7 +430,7 @@ int rt_ioctl_siwmode(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -453,7 +453,7 @@ int rt_ioctl_siwmode(struct net_device *dev, return -EINVAL; } - // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key + /* Reset Ralink supplicant to not use, it will be set to start when UI set PMK key */ pAdapter->StaCfg.WpaState = SS_NOTUSE; return 0; @@ -486,7 +486,7 @@ int rt_ioctl_siwsens(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -591,7 +591,7 @@ int rt_ioctl_siwap(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -602,10 +602,10 @@ int rt_ioctl_siwap(struct net_device *dev, DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n")); } - // tell CNTL state machine to call NdisMSetInformationComplete() after completing - // this request, because this request is initiated by NDIS. + /* tell CNTL state machine to call NdisMSetInformationComplete() after completing */ + /* this request, because this request is initiated by NDIS. */ pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE; - // Prevent to connect AP again in STAMlmePeriodicExec + /* Prevent to connect AP again in STAMlmePeriodicExec */ pAdapter->MlmeAux.AutoReconnectSsidLen = 32; memset(Bssid, 0, MAC_ADDR_LEN); @@ -634,7 +634,7 @@ int rt_ioctl_giwap(struct net_device *dev, ap_addr->sa_family = ARPHRD_ETHER; memcpy(ap_addr->sa_data, &pAdapter->CommonCfg.Bssid, ETH_ALEN); } - // Add for RT2870 + /* Add for RT2870 */ else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(ap_addr->sa_data, &pAdapter->MlmeAux.Bssid, ETH_ALEN); @@ -667,12 +667,12 @@ static void set_quality(PRTMP_ADAPTER pAdapter, { __u8 ChannelQuality; - // Normalize Rssi + /* Normalize Rssi */ if (rssi >= -50) ChannelQuality = 100; - else if (rssi >= -80) // between -50 ~ -80dbm + else if (rssi >= -80) /* between -50 ~ -80dbm */ ChannelQuality = (__u8) (24 + ((rssi + 80) * 26) / 10); - else if (rssi >= -90) // between -80 ~ -90dbm + else if (rssi >= -90) /* between -80 ~ -90dbm */ ChannelQuality = (__u8) ((rssi + 90) * 26) / 10; else ChannelQuality = 0; @@ -680,7 +680,7 @@ static void set_quality(PRTMP_ADAPTER pAdapter, iq->qual = (__u8) ChannelQuality; iq->level = (__u8) (rssi); - iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8) pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); // noise level (dBm) + iq->noise = (pAdapter->BbpWriteLatch[66] > pAdapter->BbpTuning.FalseCcaUpperThreshold) ? ((__u8) pAdapter->BbpTuning.FalseCcaUpperThreshold) : ((__u8) pAdapter->BbpWriteLatch[66]); /* noise level (dBm) */ iq->noise += 256 - 143; iq->updated = pAdapter->iw_stats.qual.updated; } @@ -697,12 +697,12 @@ int rt_ioctl_iwaplist(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); data->length = 0; return 0; - //return -ENETDOWN; + /*return -ENETDOWN; */ } for (i = 0; i < IW_MAX_AP; i++) { @@ -733,7 +733,7 @@ int rt_ioctl_siwscan(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -781,10 +781,10 @@ int rt_ioctl_siwscan(struct net_device *dev, DBGPRINT(RT_DEBUG_TRACE, ("!!! MLME busy, reset MLME state machine !!!\n")); } - // tell CNTL state machine to call NdisMSetInformationComplete() after completing - // this request, because this request is initiated by NDIS. + /* tell CNTL state machine to call NdisMSetInformationComplete() after completing */ + /* this request, because this request is initiated by NDIS. */ pAdapter->MlmeAux.CurrReqIsFromNdis = FALSE; - // Reset allowed scan retries + /* Reset allowed scan retries */ pAdapter->StaCfg.ScanCnt = 0; pAdapter->StaCfg.LastScanTime = Now; @@ -837,8 +837,8 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev >= end_buf) { return -E2BIG; } - //MAC address - //================================ + /*MAC address */ + /*================================ */ memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; @@ -935,8 +935,8 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev == previous_ev) return -E2BIG; - //ESSID - //================================ + /*ESSID */ + /*================================ */ memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWESSID; iwe.u.data.length = pAdapter->ScanTab.BssEntry[i].SsidLen; @@ -950,8 +950,8 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev == previous_ev) return -E2BIG; - //Network Type - //================================ + /*Network Type */ + /*================================ */ memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWMODE; if (pAdapter->ScanTab.BssEntry[i].BssType == Ndis802_11IBSS) { @@ -971,8 +971,8 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev == previous_ev) return -E2BIG; - //Channel and Frequency - //================================ + /*Channel and Frequency */ + /*================================ */ memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter)) @@ -989,8 +989,8 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev == previous_ev) return -E2BIG; - //Add quality statistics - //================================ + /*Add quality statistics */ + /*================================ */ memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVQUAL; iwe.u.qual.level = 0; @@ -1003,8 +1003,8 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev == previous_ev) return -E2BIG; - //Encyption key - //================================ + /*Encyption key */ + /*================================ */ memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWENCODE; if (CAP_IS_PRIVACY_ON @@ -1024,8 +1024,8 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev == previous_ev) return -E2BIG; - //Bit Rate - //================================ + /*Bit Rate */ + /*================================ */ if (pAdapter->ScanTab.BssEntry[i].SupRateLen) { UCHAR tmpRate = pAdapter->ScanTab.BssEntry[i].SupRate[pAdapter-> @@ -1083,7 +1083,7 @@ int rt_ioctl_giwscan(struct net_device *dev, else return -E2BIG; } - //WPA IE + /*WPA IE */ if (pAdapter->ScanTab.BssEntry[i].WpaIE.IELen > 0) { memset(&iwe, 0, sizeof(iwe)); memset(&custom[0], 0, MAX_CUSTOM_LEN); @@ -1099,7 +1099,7 @@ int rt_ioctl_giwscan(struct net_device *dev, if (current_ev == previous_ev) return -E2BIG; } - //WPA2 IE + /*WPA2 IE */ if (pAdapter->ScanTab.BssEntry[i].RsnIE.IELen > 0) { memset(&iwe, 0, sizeof(iwe)); memset(&custom[0], 0, MAX_CUSTOM_LEN); @@ -1133,7 +1133,7 @@ int rt_ioctl_siwessid(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1142,7 +1142,7 @@ int rt_ioctl_siwessid(struct net_device *dev, if (data->flags) { PSTRING pSsidString = NULL; - // Includes null character. + /* Includes null character. */ if (data->length > (IW_ESSID_MAX_SIZE + 1)) return -E2BIG; @@ -1155,7 +1155,7 @@ int rt_ioctl_siwessid(struct net_device *dev, } else return -ENOMEM; } else { - // ANY ssid + /* ANY ssid */ if (Set_SSID_Proc(pAdapter, "") == FALSE) return -EINVAL; } @@ -1183,14 +1183,14 @@ int rt_ioctl_giwessid(struct net_device *dev, pAdapter->CommonCfg.SsidLen); } #ifdef RTMP_MAC_USB - // Add for RT2870 + /* Add for RT2870 */ else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) { data->length = pAdapter->CommonCfg.SsidLen; memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen); } -#endif // RTMP_MAC_USB // - else { //the ANY ssid was specified +#endif /* RTMP_MAC_USB // */ + else { /*the ANY ssid was specified */ data->length = 0; DBGPRINT(RT_DEBUG_TRACE, ("MediaState is not connected, ess\n")); @@ -1208,7 +1208,7 @@ int rt_ioctl_siwnickn(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1249,7 +1249,7 @@ int rt_ioctl_siwrts(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1278,7 +1278,7 @@ int rt_ioctl_giwrts(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1300,7 +1300,7 @@ int rt_ioctl_siwfrag(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1328,7 +1328,7 @@ int rt_ioctl_giwfrag(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1351,7 +1351,7 @@ int rt_ioctl_siwencode(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1366,7 +1366,7 @@ int rt_ioctl_siwencode(struct net_device *dev, goto done; } else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN) { - //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAdapter); pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled; pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled; @@ -1390,7 +1390,7 @@ int rt_ioctl_siwencode(struct net_device *dev, ("==>rt_ioctl_siwencode::Wrong keyIdx=%d! Using default key instead (%d)\n", keyIdx, pAdapter->StaCfg.DefaultKeyId)); - //Using default key + /*Using default key */ keyIdx = pAdapter->StaCfg.DefaultKeyId; } else pAdapter->StaCfg.DefaultKeyId = keyIdx; @@ -1455,7 +1455,7 @@ rt_ioctl_giwencode(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1469,14 +1469,14 @@ rt_ioctl_giwencode(struct net_device *dev, erq->length = 0; erq->flags = IW_ENCODE_DISABLED; } else if ((kid > 0) && (kid <= 4)) { - // copy wep key + /* copy wep key */ erq->flags = kid; /* NB: base 1 */ if (erq->length > pAdapter->SharedKey[BSS0][kid - 1].KeyLen) erq->length = pAdapter->SharedKey[BSS0][kid - 1].KeyLen; memcpy(key, pAdapter->SharedKey[BSS0][kid - 1].Key, erq->length); - //if ((kid == pAdapter->PortCfg.DefaultKeyId)) - //erq->flags |= IW_ENCODE_ENABLED; /* XXX */ + /*if ((kid == pAdapter->PortCfg.DefaultKeyId)) */ + /*erq->flags |= IW_ENCODE_ENABLED; */ /* XXX */ if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared) erq->flags |= IW_ENCODE_RESTRICTED; /* XXX */ else @@ -1493,7 +1493,7 @@ rt_ioctl_giwencode(struct net_device *dev, memcpy(key, pAdapter->SharedKey[BSS0][pAdapter->StaCfg.DefaultKeyId]. Key, erq->length); - // copy default key ID + /* copy default key ID */ if (pAdapter->StaCfg.AuthMode == Ndis802_11AuthModeShared) erq->flags |= IW_ENCODE_RESTRICTED; /* XXX */ else @@ -1595,7 +1595,7 @@ int rt_ioctl_siwmlme(struct net_device *dev, pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; } break; -#endif // IW_MLME_DEAUTH // +#endif /* IW_MLME_DEAUTH // */ #ifdef IW_MLME_DISASSOC case IW_MLME_DISASSOC: DBGPRINT(RT_DEBUG_TRACE, @@ -1612,7 +1612,7 @@ int rt_ioctl_siwmlme(struct net_device *dev, pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC; MlmeDisassocReqAction(pAd, &MsgElem); break; -#endif // IW_MLME_DISASSOC // +#endif /* IW_MLME_DISASSOC // */ default: DBGPRINT(RT_DEBUG_TRACE, ("====> %s - Unknow Command\n", __func__)); @@ -1631,7 +1631,7 @@ int rt_ioctl_siwauth(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1712,10 +1712,10 @@ int rt_ioctl_siwauth(struct net_device *dev, Ndis802_11AuthModeWPA2; pAdapter->StaCfg.IEEE8021X = FALSE; } else - // WEP 1x + /* WEP 1x */ pAdapter->StaCfg.IEEE8021X = TRUE; } else if (param->value == 0) { - //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAdapter); } DBGPRINT(RT_DEBUG_TRACE, @@ -1742,7 +1742,7 @@ int rt_ioctl_siwauth(struct net_device *dev, pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED; else { - //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAdapter); } DBGPRINT(RT_DEBUG_TRACE, @@ -1781,7 +1781,7 @@ int rt_ioctl_giwauth(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1831,7 +1831,7 @@ void fnSetCipherKey(IN PRTMP_ADAPTER pAdapter, LEN_TKIP_RXMICK); pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CipherAlg; - // Update group key information to ASIC Shared Key Table + /* Update group key information to ASIC Shared Key Table */ AsicAddSharedKeyEntry(pAdapter, BSS0, keyIdx, @@ -1841,14 +1841,14 @@ void fnSetCipherKey(IN PRTMP_ADAPTER pAdapter, pAdapter->SharedKey[BSS0][keyIdx].RxMic); if (bGTK) - // Update ASIC WCID attribute table and IVEIV table + /* Update ASIC WCID attribute table and IVEIV table */ RTMPAddWcidAttributeEntry(pAdapter, BSS0, keyIdx, pAdapter->SharedKey[BSS0][keyIdx]. CipherAlg, NULL); else - // Update ASIC WCID attribute table and IVEIV table + /* Update ASIC WCID attribute table and IVEIV table */ RTMPAddWcidAttributeEntry(pAdapter, BSS0, keyIdx, @@ -1869,7 +1869,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAdapter, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -1877,7 +1877,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, if (encoding->flags & IW_ENCODE_DISABLED) { keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1; - // set BSSID wcid entry of the Pair-wise Key table as no-security mode + /* set BSSID wcid entry of the Pair-wise Key table as no-security mode */ AsicRemovePairwiseKeyEntry(pAdapter, BSS0, BSSID_WCID); pAdapter->SharedKey[BSS0][keyIdx].KeyLen = 0; pAdapter->SharedKey[BSS0][keyIdx].CipherAlg = CIPHER_NONE; @@ -1888,7 +1888,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, ("%s::Remove all keys!(encoding->flags = %x)\n", __func__, encoding->flags)); } else { - // Get Key Index and convet to our own defined key index + /* Get Key Index and convet to our own defined key index */ keyIdx = (encoding->flags & IW_ENCODE_INDEX) - 1; if ((keyIdx < 0) || (keyIdx >= NR_WEP_KEYS)) return -EINVAL; @@ -1930,7 +1930,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, Ndis802_11GroupWEP40Enabled || pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled) { - // Set Group key material to Asic + /* Set Group key material to Asic */ AsicAddSharedKeyEntry(pAdapter, BSS0, keyIdx, pAdapter-> SharedKey[BSS0][keyIdx]. @@ -1939,7 +1939,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, SharedKey[BSS0][keyIdx]. Key, NULL, NULL); - // Update WCID attribute table and IVEIV table for this group key table + /* Update WCID attribute table and IVEIV table for this group key table */ RTMPAddWcidAttributeEntry(pAdapter, BSS0, keyIdx, pAdapter-> @@ -1949,7 +1949,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, STA_PORT_SECURED(pAdapter); - // Indicate Connected for GUI + /* Indicate Connected for GUI */ pAdapter->IndicateMediaState = NdisMediaStateConnected; } @@ -1964,7 +1964,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, CIPHER_TKIP, FALSE, ext); if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2) { - //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAdapter); pAdapter->IndicateMediaState = NdisMediaStateConnected; @@ -1975,8 +1975,8 @@ int rt_ioctl_siwencodeext(struct net_device *dev, fnSetCipherKey(pAdapter, keyIdx, CIPHER_TKIP, TRUE, ext); - // set 802.1x port control - //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /* set 802.1x port control */ + /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAdapter); pAdapter->IndicateMediaState = NdisMediaStateConnected; @@ -1990,7 +1990,7 @@ int rt_ioctl_siwencodeext(struct net_device *dev, FALSE, ext); if (pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA2) - //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAdapter); pAdapter->IndicateMediaState = NdisMediaStateConnected; @@ -1998,8 +1998,8 @@ int rt_ioctl_siwencodeext(struct net_device *dev, fnSetCipherKey(pAdapter, keyIdx, CIPHER_AES, TRUE, ext); - // set 802.1x port control - //pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; + /* set 802.1x port control */ + /*pAdapter->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; */ STA_PORT_SECURED(pAdapter); pAdapter->IndicateMediaState = NdisMediaStateConnected; @@ -2142,7 +2142,7 @@ int rt_ioctl_giwgenie(struct net_device *dev, } else { UCHAR RSNIe = IE_WPA; - if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) // ID, Len + if (wrqu->data.length < (pAd->StaCfg.RSNIE_Len + 2)) /* ID, Len */ return -E2BIG; wrqu->data.length = pAd->StaCfg.RSNIE_Len + 2; @@ -2183,7 +2183,7 @@ int rt_ioctl_siwpmksa(struct net_device *dev, case IW_PMKSA_REMOVE: for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++) { - // compare the BSSID + /* compare the BSSID */ if (NdisEqualMemory (pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, @@ -2219,7 +2219,7 @@ int rt_ioctl_siwpmksa(struct net_device *dev, case IW_PMKSA_ADD: for (CachedIdx = 0; CachedIdx < pAd->StaCfg.SavedPMKNum; CachedIdx++) { - // compare the BSSID + /* compare the BSSID */ if (NdisEqualMemory (pPmksa->bssid.sa_data, pAd->StaCfg.SavedPMK[CachedIdx].BSSID, @@ -2227,7 +2227,7 @@ int rt_ioctl_siwpmksa(struct net_device *dev, break; } - // Found, replace it + /* Found, replace it */ if (CachedIdx < PMKID_NO) { DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx)); @@ -2238,9 +2238,9 @@ int rt_ioctl_siwpmksa(struct net_device *dev, PMKID[0], pPmksa->pmkid, 16); pAd->StaCfg.SavedPMKNum++; } - // Not found, replace the last one + /* Not found, replace the last one */ else { - // Randomly replace one + /* Randomly replace one */ CachedIdx = (pPmksa->bssid.sa_data[5] % PMKID_NO); DBGPRINT(RT_DEBUG_OFF, ("Update PMKID, idx = %d\n", CachedIdx)); @@ -2272,7 +2272,7 @@ int rt_ioctl_siwrate(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAd, dev); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("rt_ioctl_siwrate::Network is down!\n")); @@ -2285,7 +2285,7 @@ int rt_ioctl_siwrate(struct net_device *dev, rate = X, fixed = 1 => (fixed rate X) */ if (rate == -1) { - //Auto Rate + /*Auto Rate */ pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; pAd->StaCfg.bAutoTxRateSwitch = TRUE; if ((pAd->CommonCfg.PhyMode <= PHY_11G) || @@ -2311,7 +2311,7 @@ int rt_ioctl_siwrate(struct net_device *dev, pAd->StaCfg.DesiredTransmitSetting.field. MCS)); } else { - // TODO: rate = X, fixed = 0 => (rates <= X) + /* TODO: rate = X, fixed = 0 => (rates <= X) */ return -EOPNOTSUPP; } } @@ -2342,7 +2342,7 @@ int rt_ioctl_giwrate(struct net_device *dev, GET_PAD_FROM_NET_DEV(pAd, dev); rate_count = sizeof(ralinkrate) / sizeof(__s32); - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); return -ENETDOWN; @@ -2359,7 +2359,7 @@ int rt_ioctl_giwrate(struct net_device *dev, pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word; if (ht_setting.field.MODE >= MODE_HTMIX) { -// rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS); +/* rate_index = 12 + ((UCHAR)ht_setting.field.BW *16) + ((UCHAR)ht_setting.field.ShortGI *32) + ((UCHAR)ht_setting.field.MCS); */ rate_index = 12 + ((UCHAR) ht_setting.field.BW * 24) + ((UCHAR) ht_setting.field.ShortGI * 48) + @@ -2460,7 +2460,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev, pObj = (POS_COOKIE) pAd->OS_Cookie; - //check if the interface is down + /*check if the interface is down */ if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) { { DBGPRINT(RT_DEBUG_TRACE, ("INFO::Network is down!\n")); @@ -2468,7 +2468,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev, } } - { // determine this ioctl command is comming from which interface. + { /* determine this ioctl command is comming from which interface. */ pObj->ioctl_if_type = INT_MAIN; pObj->ioctl_if = MAIN_MBSSID; } @@ -2484,41 +2484,41 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev, rt_ioctl_giwname(net_dev, NULL, name, NULL); break; } - case SIOCGIWESSID: //Get ESSID + case SIOCGIWESSID: /*Get ESSID */ { struct iw_point *essid = &wrq->u.essid; rt_ioctl_giwessid(net_dev, NULL, essid, essid->pointer); break; } - case SIOCSIWESSID: //Set ESSID + case SIOCSIWESSID: /*Set ESSID */ { struct iw_point *essid = &wrq->u.essid; rt_ioctl_siwessid(net_dev, NULL, essid, essid->pointer); break; } - case SIOCSIWNWID: // set network id (the cell) - case SIOCGIWNWID: // get network id + case SIOCSIWNWID: /* set network id (the cell) */ + case SIOCGIWNWID: /* get network id */ Status = -EOPNOTSUPP; break; - case SIOCSIWFREQ: //set channel/frequency (Hz) + case SIOCSIWFREQ: /*set channel/frequency (Hz) */ { struct iw_freq *freq = &wrq->u.freq; rt_ioctl_siwfreq(net_dev, NULL, freq, NULL); break; } - case SIOCGIWFREQ: // get channel/frequency (Hz) + case SIOCGIWFREQ: /* get channel/frequency (Hz) */ { struct iw_freq *freq = &wrq->u.freq; rt_ioctl_giwfreq(net_dev, NULL, freq, NULL); break; } - case SIOCSIWNICKN: //set node name/nickname + case SIOCSIWNICKN: /*set node name/nickname */ { - //struct iw_point *data=&wrq->u.data; - //rt_ioctl_siwnickn(net_dev, NULL, data, NULL); + /*struct iw_point *data=&wrq->u.data; */ + /*rt_ioctl_siwnickn(net_dev, NULL, data, NULL); */ break; } - case SIOCGIWNICKN: //get node name/nickname + case SIOCGIWNICKN: /*get node name/nickname */ { struct iw_point *erq = NULL; erq = &wrq->u.data; @@ -2528,37 +2528,37 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev, erq->length); break; } - case SIOCGIWRATE: //get default bit rate (bps) + case SIOCGIWRATE: /*get default bit rate (bps) */ rt_ioctl_giwrate(net_dev, NULL, &wrq->u, NULL); break; - case SIOCSIWRATE: //set default bit rate (bps) + case SIOCSIWRATE: /*set default bit rate (bps) */ rt_ioctl_siwrate(net_dev, NULL, &wrq->u, NULL); break; - case SIOCGIWRTS: // get RTS/CTS threshold (bytes) + case SIOCGIWRTS: /* get RTS/CTS threshold (bytes) */ { struct iw_param *rts = &wrq->u.rts; rt_ioctl_giwrts(net_dev, NULL, rts, NULL); break; } - case SIOCSIWRTS: //set RTS/CTS threshold (bytes) + case SIOCSIWRTS: /*set RTS/CTS threshold (bytes) */ { struct iw_param *rts = &wrq->u.rts; rt_ioctl_siwrts(net_dev, NULL, rts, NULL); break; } - case SIOCGIWFRAG: //get fragmentation thr (bytes) + case SIOCGIWFRAG: /*get fragmentation thr (bytes) */ { struct iw_param *frag = &wrq->u.frag; rt_ioctl_giwfrag(net_dev, NULL, frag, NULL); break; } - case SIOCSIWFRAG: //set fragmentation thr (bytes) + case SIOCSIWFRAG: /*set fragmentation thr (bytes) */ { struct iw_param *frag = &wrq->u.frag; rt_ioctl_siwfrag(net_dev, NULL, frag, NULL); break; } - case SIOCGIWENCODE: //get encoding token & mode + case SIOCGIWENCODE: /*get encoding token & mode */ { struct iw_point *erq = &wrq->u.encoding; if (erq) @@ -2566,7 +2566,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev, erq->pointer); break; } - case SIOCSIWENCODE: //set encoding token & mode + case SIOCSIWENCODE: /*set encoding token & mode */ { struct iw_point *erq = &wrq->u.encoding; if (erq) @@ -2574,41 +2574,41 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev, erq->pointer); break; } - case SIOCGIWAP: //get access point MAC addresses + case SIOCGIWAP: /*get access point MAC addresses */ { struct sockaddr *ap_addr = &wrq->u.ap_addr; rt_ioctl_giwap(net_dev, NULL, ap_addr, ap_addr->sa_data); break; } - case SIOCSIWAP: //set access point MAC addresses + case SIOCSIWAP: /*set access point MAC addresses */ { struct sockaddr *ap_addr = &wrq->u.ap_addr; rt_ioctl_siwap(net_dev, NULL, ap_addr, ap_addr->sa_data); break; } - case SIOCGIWMODE: //get operation mode + case SIOCGIWMODE: /*get operation mode */ { __u32 *mode = &wrq->u.mode; rt_ioctl_giwmode(net_dev, NULL, mode, NULL); break; } - case SIOCSIWMODE: //set operation mode + case SIOCSIWMODE: /*set operation mode */ { __u32 *mode = &wrq->u.mode; rt_ioctl_siwmode(net_dev, NULL, mode, NULL); break; } - case SIOCGIWSENS: //get sensitivity (dBm) - case SIOCSIWSENS: //set sensitivity (dBm) - case SIOCGIWPOWER: //get Power Management settings - case SIOCSIWPOWER: //set Power Management settings - case SIOCGIWTXPOW: //get transmit power (dBm) - case SIOCSIWTXPOW: //set transmit power (dBm) - case SIOCGIWRANGE: //Get range of parameters - case SIOCGIWRETRY: //get retry limits and lifetime - case SIOCSIWRETRY: //set retry limits and lifetime + case SIOCGIWSENS: /*get sensitivity (dBm) */ + case SIOCSIWSENS: /*set sensitivity (dBm) */ + case SIOCGIWPOWER: /*get Power Management settings */ + case SIOCSIWPOWER: /*set Power Management settings */ + case SIOCGIWTXPOW: /*get transmit power (dBm) */ + case SIOCSIWTXPOW: /*set transmit power (dBm) */ + case SIOCGIWRANGE: /*Get range of parameters */ + case SIOCGIWRETRY: /*get retry limits and lifetime */ + case SIOCSIWRETRY: /*set retry limits and lifetime */ case RT_PRIV_IOCTL: case RT_PRIV_IOCTL_EXT: case RTPRIV_IOCTL_SET: @@ -2625,7 +2625,7 @@ INT rt28xx_sta_ioctl(IN struct net_device *net_dev, break; } - if (StateMachineTouched) // Upper layer sent a MLME-related operations + if (StateMachineTouched) /* Upper layer sent a MLME-related operations */ RTMP_MLME_HANDLER(pAd); return Status; @@ -2650,7 +2650,7 @@ INT Set_SSID_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) if (strlen(arg) != 0) { NdisMoveMemory(Ssid.Ssid, arg, strlen(arg)); Ssid.SsidLength = strlen(arg); - } else //ANY ssid + } else /*ANY ssid */ { Ssid.SsidLength = 0; memcpy(Ssid.Ssid, "", 0); @@ -2704,7 +2704,7 @@ INT Set_SSID_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) } else success = FALSE; - if (StateMachineTouched) // Upper layer sent a MLME-related operations + if (StateMachineTouched) /* Upper layer sent a MLME-related operations */ RTMP_MLME_HANDLER(pAdapter); return success; @@ -2724,7 +2724,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) if (strcmp(arg, "Adhoc") == 0) { if (pAdapter->StaCfg.BssType != BSS_ADHOC) { - // Config has changed + /* Config has changed */ pAdapter->bConfigChanged = TRUE; if (MONITOR_ON(pAdapter)) { RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, @@ -2738,9 +2738,9 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) LinkDown(pAdapter, FALSE); } if (INFRA_ON(pAdapter)) { - //BOOLEAN Cancelled; - // Set the AutoReconnectSsid to prevent it reconnect to old SSID - // Since calling this indicate user don't want to connect to that SSID anymore. + /*BOOLEAN Cancelled; */ + /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */ + /* Since calling this indicate user don't want to connect to that SSID anymore. */ pAdapter->MlmeAux.AutoReconnectSsidLen = 32; NdisZeroMemory(pAdapter->MlmeAux. AutoReconnectSsid, @@ -2759,7 +2759,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) ("===>Set_NetworkType_Proc::(AD-HOC)\n")); } else if (strcmp(arg, "Infra") == 0) { if (pAdapter->StaCfg.BssType != BSS_INFRA) { - // Config has changed + /* Config has changed */ pAdapter->bConfigChanged = TRUE; if (MONITOR_ON(pAdapter)) { RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, @@ -2773,8 +2773,8 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) LinkDown(pAdapter, FALSE); } if (ADHOC_ON(pAdapter)) { - // Set the AutoReconnectSsid to prevent it reconnect to old SSID - // Since calling this indicate user don't want to connect to that SSID anymore. + /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */ + /* Since calling this indicate user don't want to connect to that SSID anymore. */ pAdapter->MlmeAux.AutoReconnectSsidLen = 32; NdisZeroMemory(pAdapter->MlmeAux. AutoReconnectSsid, @@ -2794,9 +2794,9 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_INFRA_ON); OPSTATUS_CLEAR_FLAG(pAdapter, fOP_STATUS_ADHOC_ON); OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_MEDIA_STATE_CONNECTED); - // disable all periodic state machine + /* disable all periodic state machine */ pAdapter->StaCfg.bAutoReconnect = FALSE; - // reset all mlme state machine + /* reset all mlme state machine */ RTMP_MLME_RESET_STATE_MACHINE(pAdapter); DBGPRINT(RT_DEBUG_TRACE, ("fOP_STATUS_MEDIA_STATE_CONNECTED \n")); @@ -2812,7 +2812,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) pAdapter->CommonCfg.RegTransmitSetting.field.BW == BW_40 && pAdapter->CommonCfg.RegTransmitSetting.field.EXTCHA == EXTCHA_ABOVE) { - // 40MHz ,control channel at lower + /* 40MHz ,control channel at lower */ RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue); bbpValue &= (~0x18); @@ -2820,7 +2820,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, BBP_R4, bbpValue); pAdapter->CommonCfg.BBPCurrentBW = BW_40; - // RX : control channel at lower + /* RX : control channel at lower */ RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R3, &bbpValue); bbpValue &= (~0x20); @@ -2846,7 +2846,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) BW_40 && pAdapter->CommonCfg.RegTransmitSetting.field. EXTCHA == EXTCHA_BELOW) { - // 40MHz ,control channel at upper + /* 40MHz ,control channel at upper */ RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue); bbpValue &= (~0x18); @@ -2875,7 +2875,7 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) pAdapter->CommonCfg.Channel, pAdapter->CommonCfg.CentralChannel)); } else { - // 20MHz + /* 20MHz */ RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, BBP_R4, &bbpValue); bbpValue &= (~0x18); @@ -2889,13 +2889,13 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) ("BW_20, Channel(%d)\n", pAdapter->CommonCfg.Channel)); } - // Enable Rx with promiscuous reception + /* Enable Rx with promiscuous reception */ RTMP_IO_WRITE32(pAdapter, RX_FILTR_CFG, 0x3); - // ASIC supporsts sniffer function with replacing RSSI with timestamp. - //RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value); - //Value |= (0x80); - //RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value); - // disable sync + /* ASIC supporsts sniffer function with replacing RSSI with timestamp. */ + /*RTMP_IO_READ32(pAdapter, MAC_SYS_CTRL, &Value); */ + /*Value |= (0x80); */ + /*RTMP_IO_WRITE32(pAdapter, MAC_SYS_CTRL, Value); */ + /* disable sync */ RTMP_IO_READ32(pAdapter, BCN_TIME_CFG, &csr.word); csr.field.bBeaconGen = 0; csr.field.bTBTTEnable = 0; @@ -2903,11 +2903,11 @@ INT Set_NetworkType_Proc(IN PRTMP_ADAPTER pAdapter, IN PSTRING arg) RTMP_IO_WRITE32(pAdapter, BCN_TIME_CFG, csr.word); pAdapter->StaCfg.BssType = BSS_MONITOR; - pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; //ARPHRD_IEEE80211; // IEEE80211 + pAdapter->net_dev->type = ARPHRD_IEEE80211_PRISM; /*ARPHRD_IEEE80211; // IEEE80211 */ DBGPRINT(RT_DEBUG_TRACE, ("===>Set_NetworkType_Proc::(MONITOR)\n")); } - // Reset Ralink supplicant to not use, it will be set to start when UI set PMK key + /* Reset Ralink supplicant to not use, it will be set to start when UI set PMK key */ pAdapter->StaCfg.WpaState = SS_NOTUSE; DBGPRINT(RT_DEBUG_TRACE, diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c index ebc2261..74529d1 100644 --- a/drivers/staging/rt2860/usb_main_dev.c +++ b/drivers/staging/rt2860/usb_main_dev.c @@ -26,9 +26,9 @@ #include "rt_config.h" -// Following information will be show when you run 'modinfo' -// *** If you have a solution for the bug in current version of driver, please mail to me. -// Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** +/* Following information will be show when you run 'modinfo' */ +/* *** If you have a solution for the bug in current version of driver, please mail to me. */ +/* Otherwise post to forum in ralinktech's web site(www.ralinktech.com) and let all users help you. *** */ MODULE_AUTHOR("Paul Lin "); MODULE_DESCRIPTION("RT2870/RT3070 Wireless Lan Linux Driver"); MODULE_LICENSE("GPL"); @@ -101,7 +101,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x1737, 0x0071)}, /* Linksys WUSB600N */ {USB_DEVICE(0x0411, 0x00e8)}, /* Buffalo WLI-UC-G300N */ {USB_DEVICE(0x050d, 0x815c)}, /* Belkin F5D8053 */ -#endif // RT2870 // +#endif /* RT2870 // */ #ifdef RT3070 {USB_DEVICE(0x148F, 0x3070)}, /* Ralink 3070 */ {USB_DEVICE(0x148F, 0x3071)}, /* Ralink 3071 */ @@ -134,7 +134,7 @@ struct usb_device_id rtusb_usb_id[] = { {USB_DEVICE(0x5A57, 0x0283)}, /* Zinwell 3072 */ {USB_DEVICE(0x04BB, 0x0945)}, /* I-O DATA 3072 */ {USB_DEVICE(0x203D, 0x1480)}, /* Encore 3070 */ -#endif // RT3070 // +#endif /* RT3070 // */ {USB_DEVICE(0x0DF6, 0x003F)}, /* Sitecom WL-608 */ {USB_DEVICE(0x1737, 0x0077)}, /* Linksys WUSB54GC-EU v3 */ {USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */ @@ -207,14 +207,14 @@ BOOLEAN RT28XXChipsetCheck(IN void *_dev_p) /**************************************************************************/ /**************************************************************************/ -//tested for kernel 2.6series +/*tested for kernel 2.6series */ /**************************************************************************/ /**************************************************************************/ #ifdef CONFIG_PM static int rt2870_suspend(struct usb_interface *intf, pm_message_t state); static int rt2870_resume(struct usb_interface *intf); -#endif // CONFIG_PM // +#endif /* CONFIG_PM // */ static int rtusb_probe(struct usb_interface *intf, const struct usb_device_id *id); @@ -264,8 +264,8 @@ static BOOLEAN USBDevConfigInit(IN struct usb_device *dev, ((iface_desc->endpoint[i].desc. bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) { - // there are 6 bulk out EP. EP6 highest priority. - // EP1-4 is EDCA. EP5 is HCCA. + /* there are 6 bulk out EP. EP6 highest priority. */ + /* EP1-4 is EDCA. EP5 is HCCA. */ pAd->BulkOutEpAddr[BulkOutIdx++] = iface_desc->endpoint[i].desc.bEndpointAddress; pAd->BulkOutMaxPacketSize = @@ -340,8 +340,8 @@ resume:rt2870_resume, VOID RT2870RejectPendingPackets(IN PRTMP_ADAPTER pAd) { - // clear PS packets - // clear TxSw packets + /* clear PS packets */ + /* clear TxSw packets */ } static int rt2870_suspend(struct usb_interface *intf, pm_message_t state) @@ -379,16 +379,16 @@ static int rt2870_resume(struct usb_interface *intf) DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2870_resume()\n")); return 0; } -#endif // CONFIG_PM // +#endif /* CONFIG_PM // */ -// Init driver module +/* Init driver module */ INT __init rtusb_init(void) { printk("rtusb init --->\n"); return usb_register(&rtusb_driver); } -// Deinit driver module +/* Deinit driver module */ VOID __exit rtusb_exit(void) { usb_deregister(&rtusb_driver); @@ -442,7 +442,7 @@ INT MlmeThread(IN void *Context) #endif /* lock the device pointers , need to check if required */ - //down(&(pAd->usbdev_semaphore)); + /*down(&(pAd->usbdev_semaphore)); */ if (!pAd->PM_FlgSuspend) MlmeHandler(pAd); @@ -521,7 +521,7 @@ INT RTUSBCmdThread(IN void *Context) CMDHandler(pAd); } - if (pAd && !pAd->PM_FlgSuspend) { // Clear the CmdQElements. + if (pAd && !pAd->PM_FlgSuspend) { /* Clear the CmdQElements. */ CmdQElmt *pCmdQElmt = NULL; NdisAcquireSpinLock(&pAd->CmdQLock); @@ -633,10 +633,10 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd) fRTMP_ADAPTER_NIC_NOT_EXIST | fRTMP_ADAPTER_BULKOUT_RESET))) ) { - // FIXME: Following code just support single bulk out. If you wanna support multiple bulk out. Modify it! + /* FIXME: Following code just support single bulk out. If you wanna support multiple bulk out. Modify it! */ pHTTXContext = (PHT_TX_CONTEXT) (&pAd->TxContext[idx]); - if (pHTTXContext->IRPPending) { // Check TxContext. + if (pHTTXContext->IRPPending) { /* Check TxContext. */ pUrb = pHTTXContext->pUrb; actual_length = pUrb->actual_length; @@ -647,7 +647,7 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd) PTX_CONTEXT pMLMEContext, pNULLContext, pPsPollContext; - //Check MgmtContext. + /*Check MgmtContext. */ pMLMEContext = (PTX_CONTEXT) (pAd->MgmtRing. Cell[pAd->MgmtRing. @@ -688,7 +688,7 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd) && pAd->TransferedLength[idx] < transfer_buffer_length && actual_length != 0 -// && TxRxQ_Pcnt==0 +/* && TxRxQ_Pcnt==0 */ && pAd->watchDogTxPendingCnt[idx] > 3) || isDataPacket == FALSE @@ -699,10 +699,10 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd) idx)); DBGPRINT(RT_DEBUG_TRACE, ("Unlink the pending URB!\n")); - // unlink it now + /* unlink it now */ RTUSB_UNLINK_URB(pUrb); - // Sleep 200 microseconds to give cancellation time to work - //RTMPusecDelay(200); + /* Sleep 200 microseconds to give cancellation time to work */ + /*RTMPusecDelay(200); */ needDumpSeq = TRUE; } } else { @@ -721,7 +721,7 @@ VOID RTUSBWatchDog(IN RTMP_ADAPTER * pAd) } } - // For Sigma debug, dump the ba_reordering sequence. + /* For Sigma debug, dump the ba_reordering sequence. */ if ((needDumpSeq == TRUE) && (pAd->CommonCfg.bDisableReordering == 0)) { USHORT Idx; PBA_REC_ENTRY pBAEntry = NULL; @@ -780,22 +780,22 @@ static void rt2870_disconnect(struct usb_device *dev, PRTMP_ADAPTER pAd) } RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST); - // for debug, wait to show some messages to /proc system + /* for debug, wait to show some messages to /proc system */ udelay(1); RtmpPhyNetDevExit(pAd, pAd->net_dev); - // FIXME: Shall we need following delay and flush the schedule?? + /* FIXME: Shall we need following delay and flush the schedule?? */ udelay(1); flush_scheduled_work(); udelay(1); - // free the root net_device + /* free the root net_device */ RtmpOSNetDevFree(pAd->net_dev); RtmpRaDevCtrlExit(pAd); - // release a use of the usb device structure + /* release a use of the usb device structure */ usb_put_dev(dev); udelay(1); @@ -815,12 +815,12 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf, DBGPRINT(RT_DEBUG_TRACE, ("===>rt2870_probe()!\n")); - // Check chipset vendor/product ID - //if (RT28XXChipsetCheck(_dev_p) == FALSE) - // goto err_out; + /* Check chipset vendor/product ID */ + /*if (RT28XXChipsetCheck(_dev_p) == FALSE) */ + /* goto err_out; */ -//RtmpDevInit============================================= - // Allocate RTMP_ADAPTER adapter structure +/*RtmpDevInit============================================= */ + /* Allocate RTMP_ADAPTER adapter structure */ handle = kmalloc(sizeof(struct os_cookie), GFP_KERNEL); if (handle == NULL) { printk @@ -834,18 +834,18 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf, kfree(handle); goto err_out; } -//USBDevInit============================================== +/*USBDevInit============================================== */ if (USBDevConfigInit(usb_dev, intf, pAd) == FALSE) goto err_out_free_radev; RtmpRaDevCtrlInit(pAd, RTMP_DEV_INF_USB); -//NetDevInit============================================== +/*NetDevInit============================================== */ net_dev = RtmpPhyNetDevInit(pAd, &netDevHook); if (net_dev == NULL) goto err_out_free_radev; - // Here are the net_device structure with usb specific parameters. + /* Here are the net_device structure with usb specific parameters. */ /* for supporting Network Manager. * Set the sysfs physical device reference for the network logical device if set prior to registration will * cause a symlink during initialization. @@ -854,8 +854,8 @@ static int __devinit rt2870_probe(IN struct usb_interface *intf, pAd->StaCfg.OriDevType = net_dev->type; -//All done, it's time to register the net device to linux kernel. - // Register this device +/*All done, it's time to register the net device to linux kernel. */ + /* Register this device */ status = RtmpOSNetDevAttach(net_dev, &netDevHook); if (status != 0) goto err_out_free_netdev; diff --git a/drivers/staging/rt2870/common/rtusb_bulk.c b/drivers/staging/rt2870/common/rtusb_bulk.c index 269dedc..a45f648 100644 --- a/drivers/staging/rt2870/common/rtusb_bulk.c +++ b/drivers/staging/rt2870/common/rtusb_bulk.c @@ -40,11 +40,11 @@ #ifdef RTMP_MAC_USB #include "../rt_config.h" -// Match total 6 bulkout endpoint to corresponding queue. +/* Match total 6 bulkout endpoint to corresponding queue. */ UCHAR EpToQueue[6] = { FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_EDCA, FIFO_MGMT }; -//static BOOLEAN SingleBulkOut = FALSE; +/*static BOOLEAN SingleBulkOut = FALSE; */ void RTUSB_FILL_BULK_URB(struct urb *pUrb, struct usb_device *pUsb_Dev, @@ -69,7 +69,7 @@ VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd, pUrb = pTxContext->pUrb; ASSERT(pUrb); - // Store BulkOut PipeId + /* Store BulkOut PipeId */ pTxContext->BulkOutPipeId = BulkOutPipeId; if (pTxContext->bAggregatible) { @@ -79,7 +79,7 @@ VOID RTUSBInitTxDesc(IN PRTMP_ADAPTER pAd, (PUCHAR) pTxContext->TransferBuffer->field.WirelessPacket; } - //Initialize a tx bulk urb + /*Initialize a tx bulk urb */ RTUSB_FILL_BULK_URB(pUrb, pObj->pUsb_Dev, usb_sndbulkpipe(pObj->pUsb_Dev, @@ -108,14 +108,14 @@ VOID RTUSBInitHTTxDesc(IN PRTMP_ADAPTER pAd, pUrb = pTxContext->pUrb; ASSERT(pUrb); - // Store BulkOut PipeId + /* Store BulkOut PipeId */ pTxContext->BulkOutPipeId = BulkOutPipeId; pSrc = &pTxContext->TransferBuffer->field.WirelessPacket[pTxContext-> NextBulkOutPosition]; - //Initialize a tx bulk urb + /*Initialize a tx bulk urb */ RTUSB_FILL_BULK_URB(pUrb, pObj->pUsb_Dev, usb_sndbulkpipe(pObj->pUsb_Dev, @@ -142,7 +142,7 @@ VOID RTUSBInitRxDesc(IN PRTMP_ADAPTER pAd, IN PRX_CONTEXT pRxContext) else RX_bulk_size = MAX_RXBULK_SIZE; - //Initialize a rx bulk urb + /*Initialize a rx bulk urb */ RTUSB_FILL_BULK_URB(pUrb, pObj->pUsb_Dev, usb_rcvbulkpipe(pObj->pUsb_Dev, pAd->BulkInEpAddr), @@ -223,7 +223,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, BULK_OUT_LOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); pAd->BulkOutPending[BulkOutPipeId] = FALSE; - // Clear Data flag + /* Clear Data flag */ RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId)); @@ -234,15 +234,15 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); return; } - // Clear Data flag + /* Clear Data flag */ RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_FRAG << BulkOutPipeId)); RTUSB_CLEAR_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << BulkOutPipeId)); - //DBGPRINT(RT_DEBUG_TRACE,("BulkOut-B:I=0x%lx, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", in_interrupt(), - // pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, - // pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); + /*DBGPRINT(RT_DEBUG_TRACE,("BulkOut-B:I=0x%lx, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d!\n", in_interrupt(), */ + /* pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, */ + /* pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); */ pHTTXContext->NextBulkOutPosition = pHTTXContext->ENextBulkOutPosition; ThisBulkSize = 0; TmpBulkEndPos = pHTTXContext->NextBulkOutPosition; @@ -282,12 +282,12 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, ("RTUSBBulkOutDataPacket AMPDU = %d.\n", pTxWI->AMPDU)); - // add by Iverson, limit BulkOut size to 4k to pass WMM b mode 2T1R test items - //if ((ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) + /* add by Iverson, limit BulkOut size to 4k to pass WMM b mode 2T1R test items */ + /*if ((ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */ if ((ThisBulkSize != 0) && (pTxWI->PHYMODE == MODE_CCK)) { if (((ThisBulkSize & 0xffff8000) != 0) || ((ThisBulkSize & 0x1000) == 0x1000)) { - // Limit BulkOut size to about 4k bytes. + /* Limit BulkOut size to about 4k bytes. */ pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos; break; @@ -297,21 +297,21 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, 0)) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */ ) { - // For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. - // For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. + /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */ + /* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */ pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos; break; } } - // end Iverson + /* end Iverson */ else { - if (((ThisBulkSize & 0xffff8000) != 0) || ((ThisBulkSize & 0x6000) == 0x6000)) { // Limit BulkOut size to about 24k bytes. + if (((ThisBulkSize & 0xffff8000) != 0) || ((ThisBulkSize & 0x6000) == 0x6000)) { /* Limit BulkOut size to about 24k bytes. */ pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos; break; - } else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */ ) { // For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. - // For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. + } else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0) && (pTxWI->AMPDU == 0)) */ ) { /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */ + /* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */ pHTTXContext->ENextBulkOutPosition = TmpBulkEndPos; break; @@ -368,10 +368,10 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, pAd->BulkOutPending[BulkOutPipeId] = FALSE; BULK_OUT_UNLOCK(&pAd->BulkOutLock[BulkOutPipeId], IrqFlags); - //DBGPRINT(RT_DEBUG_LOUD,("Out:pTxInfo->USBDMATxPktLen=%d!\n", pTxInfo->USBDMATxPktLen)); + /*DBGPRINT(RT_DEBUG_LOUD,("Out:pTxInfo->USBDMATxPktLen=%d!\n", pTxInfo->USBDMATxPktLen)); */ return; } - // Increase Total transmit byte counter + /* Increase Total transmit byte counter */ pAd->RalinkCounters.OneSecTransmittedByteCount += pTxWI->MPDUtotalByteCount; pAd->RalinkCounters.TransmittedByteCount += @@ -379,7 +379,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, pLastTxInfo = pTxInfo; - // Make sure we use EDCA QUEUE. + /* Make sure we use EDCA QUEUE. */ pTxInfo->QSEL = FIFO_EDCA; ThisBulkSize += (pTxInfo->USBDMATxPktLen + 4); TmpBulkEndPos += (pTxInfo->USBDMATxPktLen + 4); @@ -400,7 +400,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, } while (TRUE); - // adjust the pTxInfo->USBDMANextVLD value of last pTxInfo. + /* adjust the pTxInfo->USBDMANextVLD value of last pTxInfo. */ if (pLastTxInfo) { pLastTxInfo->USBDMANextVLD = 0; } @@ -446,7 +446,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, pBuf[0], pBuf[1], pBuf[2], pBuf[3], pBuf[4], pBuf[5], pBuf[6], pBuf[7])); } - //DBGPRINT(RT_DEBUG_LOUD,("ENPos==CWPos=%ld, CWRPos=%ld, bCSPad=%d!\n", pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->bCopySavePad)); + /*DBGPRINT(RT_DEBUG_LOUD,("ENPos==CWPos=%ld, CWRPos=%ld, bCSPad=%d!\n", pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->bCopySavePad)); */ } if (pAd->bForcePrintTX == TRUE) @@ -456,9 +456,9 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad)); - //DBGPRINT(RT_DEBUG_LOUD,("BulkOut-A:Size=%ld, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, bLRound=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, bTxQLastRound)); + /*DBGPRINT(RT_DEBUG_LOUD,("BulkOut-A:Size=%ld, CWPos=%ld, CWRPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, bLRound=%d!\n", ThisBulkSize, pHTTXContext->CurWritePosition, pHTTXContext->CurWriteRealPos, pHTTXContext->NextBulkOutPosition, pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, bTxQLastRound)); */ - // USB DMA engine requires to pad extra 4 bytes. This pad doesn't count into real bulkoutsize. + /* USB DMA engine requires to pad extra 4 bytes. This pad doesn't count into real bulkoutsize. */ pAppendant = &pWirelessPkt[TmpBulkEndPos]; NdisZeroMemory(pAppendant, 8); ThisBulkSize += 4; @@ -470,7 +470,7 @@ VOID RTUSBBulkOutDataPacket(IN PRTMP_ADAPTER pAd, pAd->watchDogTxPendingCnt[BulkOutPipeId] = 1; BULK_OUT_UNLOCK(&pAd->TxContextQueueLock[BulkOutPipeId], IrqFlags2); - // Init Tx context descriptor + /* Init Tx context descriptor */ RTUSBInitHTTxDesc(pAd, pHTTXContext, BulkOutPipeId, ThisBulkSize, (usb_complete_t) RTUSBBulkOutDataPacketComplete); @@ -506,7 +506,7 @@ VOID RTUSBBulkOutDataPacketComplete(purbb_t pUrb, struct pt_regs * pt_regs) pAd = pHTTXContext->pAd; pObj = (POS_COOKIE) pAd->OS_Cookie; - // Store BulkOut PipeId + /* Store BulkOut PipeId */ BulkOutPipeId = pHTTXContext->BulkOutPipeId; pAd->BulkOutDataOneSecCount++; @@ -562,13 +562,13 @@ VOID RTUSBBulkOutNullFrame(IN PRTMP_ADAPTER pAd) pNullContext->IRPPending = TRUE; RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags); - // Increase Total transmit byte counter + /* Increase Total transmit byte counter */ pAd->RalinkCounters.TransmittedByteCount += pNullContext->BulkOutSize; - // Clear Null frame bulk flag + /* Clear Null frame bulk flag */ RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL); - // Init Tx context descriptor + /* Init Tx context descriptor */ RTUSBInitTxDesc(pAd, pNullContext, 0, (usb_complete_t) RTUSBBulkOutNullFrameComplete); @@ -588,7 +588,7 @@ VOID RTUSBBulkOutNullFrame(IN PRTMP_ADAPTER pAd) } -// NULL frame use BulkOutPipeId = 0 +/* NULL frame use BulkOutPipeId = 0 */ VOID RTUSBBulkOutNullFrameComplete(purbb_t pUrb, struct pt_regs * pt_regs) { PRTMP_ADAPTER pAd; @@ -633,7 +633,7 @@ VOID RTUSBBulkOutMLMEPacket(IN PRTMP_ADAPTER pAd, IN UCHAR Index) (pMLMEContext->InUse == FALSE) || (pMLMEContext->bWaitingBulkOut == FALSE)) { - // Clear MLME bulk flag + /* Clear MLME bulk flag */ RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME); return; @@ -652,17 +652,17 @@ VOID RTUSBBulkOutMLMEPacket(IN PRTMP_ADAPTER pAd, IN UCHAR Index) pMLMEContext->bWaitingBulkOut = FALSE; RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[MGMTPIPEIDX], IrqFlags); - // Increase Total transmit byte counter + /* Increase Total transmit byte counter */ pAd->RalinkCounters.TransmittedByteCount += pMLMEContext->BulkOutSize; - // Clear MLME bulk flag + /* Clear MLME bulk flag */ RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME); - // Init Tx context descriptor + /* Init Tx context descriptor */ RTUSBInitTxDesc(pAd, pMLMEContext, MGMTPIPEIDX, (usb_complete_t) RTUSBBulkOutMLMEPacketComplete); - //For mgmt urb buffer, because we use sk_buff, so we need to notify the USB controller do dma mapping. + /*For mgmt urb buffer, because we use sk_buff, so we need to notify the USB controller do dma mapping. */ pUrb->transfer_dma = 0; pUrb->transfer_flags &= (~URB_NO_TRANSFER_DMA_MAP); @@ -680,8 +680,8 @@ VOID RTUSBBulkOutMLMEPacket(IN PRTMP_ADAPTER pAd, IN UCHAR Index) return; } - //DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutMLMEPacket \n")); -// printk("<---RTUSBBulkOutMLMEPacket,Cpu=%d!, Dma=%d, SwIdx=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx); + /*DBGPRINT_RAW(RT_DEBUG_INFO, ("<---RTUSBBulkOutMLMEPacket \n")); */ +/* printk("<---RTUSBBulkOutMLMEPacket,Cpu=%d!, Dma=%d, SwIdx=%d!\n", pAd->MgmtRing.TxCpuIdx, pAd->MgmtRing.TxDmaIdx, pAd->MgmtRing.TxSwFreeIdx); */ } VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs * pt_regs) @@ -692,7 +692,7 @@ VOID RTUSBBulkOutMLMEPacketComplete(purbb_t pUrb, struct pt_regs * pt_regs) POS_COOKIE pObj; int index; - //DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutMLMEPacketComplete\n")); + /*DBGPRINT_RAW(RT_DEBUG_INFO, ("--->RTUSBBulkOutMLMEPacketComplete\n")); */ pMLMEContext = (PTX_CONTEXT) pUrb->context; pAd = pMLMEContext->pAd; pObj = (POS_COOKIE) pAd->OS_Cookie; @@ -734,10 +734,10 @@ VOID RTUSBBulkOutPsPoll(IN PRTMP_ADAPTER pAd) pPsPollContext->IRPPending = TRUE; RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[0], IrqFlags); - // Clear PS-Poll bulk flag + /* Clear PS-Poll bulk flag */ RTUSB_CLEAR_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL); - // Init Tx context descriptor + /* Init Tx context descriptor */ RTUSBInitTxDesc(pAd, pPsPollContext, MGMTPIPEIDX, (usb_complete_t) RTUSBBulkOutPsPollComplete); @@ -757,7 +757,7 @@ VOID RTUSBBulkOutPsPoll(IN PRTMP_ADAPTER pAd) } -// PS-Poll frame use BulkOutPipeId = 0 +/* PS-Poll frame use BulkOutPipeId = 0 */ VOID RTUSBBulkOutPsPollComplete(purbb_t pUrb, struct pt_regs * pt_regs) { PRTMP_ADAPTER pAd; @@ -794,12 +794,12 @@ VOID DoBulkIn(IN RTMP_ADAPTER * pAd) pAd->BulkInReq++; RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags); - // Init Rx context descriptor + /* Init Rx context descriptor */ NdisZeroMemory(pRxContext->TransferBuffer, pRxContext->BulkInOffset); RTUSBInitRxDesc(pAd, pRxContext); pUrb = pRxContext->pUrb; - if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { // fail + if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { /* fail */ RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags); pRxContext->InUse = FALSE; @@ -809,9 +809,9 @@ VOID DoBulkIn(IN RTMP_ADAPTER * pAd) RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags); DBGPRINT(RT_DEBUG_ERROR, ("RTUSBBulkReceive: Submit Rx URB failed %d\n", ret)); - } else { // success + } else { /* success */ ASSERT((pRxContext->InUse == pRxContext->IRPPending)); - //printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex); + /*printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex); */ } } @@ -864,10 +864,10 @@ VOID RTUSBBulkReceive(IN PRTMP_ADAPTER pAd) pRxContext->bRxHandling = TRUE; RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags); - // read RxContext, Since not + /* read RxContext, Since not */ STARxDoneInterruptHandle(pAd, TRUE); - // Finish to handle this bulkIn buffer. + /* Finish to handle this bulkIn buffer. */ RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags); pRxContext->BulkInOffset = 0; pRxContext->Readable = FALSE; @@ -914,9 +914,9 @@ VOID RTUSBBulkReceive(IN PRTMP_ADAPTER pAd) */ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs) { - // use a receive tasklet to handle received packets; - // or sometimes hardware IRQ will be disabled here, so we can not - // use spin_lock_bh()/spin_unlock_bh() after IRQ is disabled. :< + /* use a receive tasklet to handle received packets; */ + /* or sometimes hardware IRQ will be disabled here, so we can not */ + /* use spin_lock_bh()/spin_unlock_bh() after IRQ is disabled. :< */ PRX_CONTEXT pRxContext; PRTMP_ADAPTER pAd; POS_COOKIE pObj; @@ -945,19 +945,19 @@ VOID RTUSBBulkRxComplete(purbb_t pUrb, struct pt_regs *pt_regs) */ VOID RTUSBKickBulkOut(IN PRTMP_ADAPTER pAd) { - // BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged. + /* BulkIn Reset will reset whole USB PHY. So we need to make sure fRTMP_ADAPTER_BULKIN_RESET not flaged. */ if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NEED_STOP_TX) ) { - // 2. PS-Poll frame is next + /* 2. PS-Poll frame is next */ if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_PSPOLL)) { RTUSBBulkOutPsPoll(pAd); } - // 5. Mlme frame is next + /* 5. Mlme frame is next */ else if ((RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME)) || (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE)) { RTUSBBulkOutMLMEPacket(pAd, pAd->MgmtRing.TxDmaIdx); } - // 6. Data frame normal is next + /* 6. Data frame normal is next */ if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NORMAL)) { if (((!RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) @@ -1006,14 +1006,14 @@ VOID RTUSBKickBulkOut(IN PRTMP_ADAPTER pAd) NextBulkOutIndex[3]); } } - // 7. Null frame is the last + /* 7. Null frame is the last */ else if (RTUSB_TEST_BULK_FLAG(pAd, fRTUSB_BULK_OUT_DATA_NULL)) { if (!RTMP_TEST_FLAG (pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS)) { RTUSBBulkOutNullFrame(pAd); } } - // 8. No data avaliable + /* 8. No data avaliable */ else { } @@ -1116,8 +1116,8 @@ VOID RTUSBCancelPendingBulkInIRP(IN PRTMP_ADAPTER pAd) RTUSB_UNLINK_URB(pRxContext->pUrb); pRxContext->IRPPending = FALSE; pRxContext->InUse = FALSE; - //NdisInterlockedDecrement(&pAd->PendingRx); - //pAd->PendingRx--; + /*NdisInterlockedDecrement(&pAd->PendingRx); */ + /*pAd->PendingRx--; */ } } DBGPRINT_RAW(RT_DEBUG_TRACE, ("<---RTUSBCancelPendingBulkInIRP\n")); @@ -1145,65 +1145,65 @@ VOID RTUSBCancelPendingBulkOutIRP(IN PRTMP_ADAPTER pAd) PTX_CONTEXT pPsPollContext; PTX_CONTEXT pRTSContext; UINT i, Idx; -// unsigned int IrqFlags; -// NDIS_SPIN_LOCK *pLock; -// BOOLEAN *pPending; +/* unsigned int IrqFlags; */ +/* NDIS_SPIN_LOCK *pLock; */ +/* BOOLEAN *pPending; */ -// pLock = &pAd->BulkOutLock[MGMTPIPEIDX]; -// pPending = &pAd->BulkOutPending[MGMTPIPEIDX]; +/* pLock = &pAd->BulkOutLock[MGMTPIPEIDX]; */ +/* pPending = &pAd->BulkOutPending[MGMTPIPEIDX]; */ for (Idx = 0; Idx < 4; Idx++) { pHTTXContext = &(pAd->TxContext[Idx]); if (pHTTXContext->IRPPending == TRUE) { - // Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself - // remove it from the HeadPendingSendList and NULL out HeadPendingSendList - // when the last IRP on the list has been cancelled; that's how we exit this loop - // + /* Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself */ + /* remove it from the HeadPendingSendList and NULL out HeadPendingSendList */ + /* when the last IRP on the list has been cancelled; that's how we exit this loop */ + /* */ RTUSB_UNLINK_URB(pHTTXContext->pUrb); - // Sleep 200 microseconds to give cancellation time to work + /* Sleep 200 microseconds to give cancellation time to work */ RTMPusecDelay(200); } pAd->BulkOutPending[Idx] = FALSE; } - //RTMP_IRQ_LOCK(pLock, IrqFlags); + /*RTMP_IRQ_LOCK(pLock, IrqFlags); */ for (i = 0; i < MGMT_RING_SIZE; i++) { pMLMEContext = (PTX_CONTEXT) pAd->MgmtRing.Cell[i].AllocVa; if (pMLMEContext && (pMLMEContext->IRPPending == TRUE)) { - // Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself - // remove it from the HeadPendingSendList and NULL out HeadPendingSendList - // when the last IRP on the list has been cancelled; that's how we exit this loop - // + /* Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself */ + /* remove it from the HeadPendingSendList and NULL out HeadPendingSendList */ + /* when the last IRP on the list has been cancelled; that's how we exit this loop */ + /* */ RTUSB_UNLINK_URB(pMLMEContext->pUrb); pMLMEContext->IRPPending = FALSE; - // Sleep 200 microsecs to give cancellation time to work + /* Sleep 200 microsecs to give cancellation time to work */ RTMPusecDelay(200); } } pAd->BulkOutPending[MGMTPIPEIDX] = FALSE; - //RTMP_IRQ_UNLOCK(pLock, IrqFlags); + /*RTMP_IRQ_UNLOCK(pLock, IrqFlags); */ for (i = 0; i < BEACON_RING_SIZE; i++) { pBeaconContext = &(pAd->BeaconContext[i]); if (pBeaconContext->IRPPending == TRUE) { - // Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself - // remove it from the HeadPendingSendList and NULL out HeadPendingSendList - // when the last IRP on the list has been cancelled; that's how we exit this loop - // + /* Get the USB_CONTEXT and cancel it's IRP; the completion routine will itself */ + /* remove it from the HeadPendingSendList and NULL out HeadPendingSendList */ + /* when the last IRP on the list has been cancelled; that's how we exit this loop */ + /* */ RTUSB_UNLINK_URB(pBeaconContext->pUrb); - // Sleep 200 microsecs to give cancellation time to work + /* Sleep 200 microsecs to give cancellation time to work */ RTMPusecDelay(200); } } @@ -1227,4 +1227,4 @@ VOID RTUSBCancelPendingBulkOutIRP(IN PRTMP_ADAPTER pAd) } } -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ diff --git a/drivers/staging/rt2870/common/rtusb_data.c b/drivers/staging/rt2870/common/rtusb_data.c index d662f7f..e6b0afc 100644 --- a/drivers/staging/rt2870/common/rtusb_data.c +++ b/drivers/staging/rt2870/common/rtusb_data.c @@ -41,7 +41,7 @@ #include "../rt_config.h" -extern UCHAR Phy11BGNextRateUpward[]; // defined in mlme.c +extern UCHAR Phy11BGNextRateUpward[]; /* defined in mlme.c */ extern UCHAR EpToQueue[]; VOID REPORT_AMSDU_FRAMES_TO_LLC(IN PRTMP_ADAPTER pAd, @@ -89,8 +89,8 @@ NDIS_STATUS RTUSBFreeDescriptorRequest(IN PRTMP_ADAPTER pAd, IN UCHAR BulkOutPipeId, IN UINT32 NumberRequired) { -// UCHAR FreeNumber = 0; -// UINT Index; +/* UCHAR FreeNumber = 0; */ +/* UINT Index; */ NDIS_STATUS Status = NDIS_STATUS_FAILURE; unsigned long IrqFlags; HT_TX_CONTEXT *pHTTXContext; @@ -251,7 +251,7 @@ VOID RTMPWriteTxInfo(IN PRTMP_ADAPTER pAd, if (QueueSel != FIFO_EDCA) DBGPRINT(RT_DEBUG_TRACE, ("====> QueueSel != FIFO_EDCA<============\n")); - pTxInfo->USBDMANextVLD = FALSE; //NextValid; // Need to check with Jan about this. + pTxInfo->USBDMANextVLD = FALSE; /*NextValid; // Need to check with Jan about this. */ pTxInfo->USBDMATxburst = TxBurst; pTxInfo->WIV = bWiv; pTxInfo->SwUseLastRound = 0; @@ -259,4 +259,4 @@ VOID RTMPWriteTxInfo(IN PRTMP_ADAPTER pAd, pTxInfo->rsv2 = 0; } -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */ diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c index 9a32bc8..dd2e0d0 100644 --- a/drivers/staging/rt2870/common/rtusb_io.c +++ b/drivers/staging/rt2870/common/rtusb_io.c @@ -88,7 +88,7 @@ NTSTATUS RTUSBFirmwareWrite(IN PRTMP_ADAPTER pAd, { UINT32 MacReg; NTSTATUS Status; -// ULONG i; +/* ULONG i; */ USHORT writeLen; Status = RTUSBReadMACRegister(pAd, MAC_CSR0, &MacReg); @@ -100,11 +100,11 @@ NTSTATUS RTUSBFirmwareWrite(IN PRTMP_ADAPTER pAd, Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff); Status = RTUSBFirmwareRun(pAd); - //2008/11/28:KH add to fix the dead rf frequency offset bug<-- + /*2008/11/28:KH add to fix the dead rf frequency offset bug<-- */ RTMPusecDelay(10000); RTUSBWriteMACRegister(pAd, H2M_MAILBOX_CSR, 0); - AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00); //reset rf by MCU supported by new firmware - //2008/11/28:KH add to fix the dead rf frequency offset bug--> + AsicSendCommandToMcu(pAd, 0x72, 0x00, 0x00, 0x00); /*reset rf by MCU supported by new firmware */ + /*2008/11/28:KH add to fix the dead rf frequency offset bug--> */ return Status; } @@ -171,7 +171,7 @@ NTSTATUS RTUSBMultiWrite_OneByte(IN PRTMP_ADAPTER pAd, { NTSTATUS Status; - // TODO: In 2870, use this funciton carefully cause it's not stable. + /* TODO: In 2870, use this funciton carefully cause it's not stable. */ Status = RTUSB_VendorRequest(pAd, USBD_TRANSFER_DIRECTION_OUT, DEVICE_VENDOR_REQUEST_OUT, @@ -304,7 +304,7 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd, UINT i = 0; NTSTATUS status; - // Verify the busy condition + /* Verify the busy condition */ do { status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word); if (status >= 0) { @@ -320,16 +320,16 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd, if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) { - // - // Read failed then Return Default value. - // + /* */ + /* Read failed then Return Default value. */ + /* */ *pValue = pAd->BbpWriteLatch[Id]; DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n")); return STATUS_UNSUCCESSFUL; } - // Prepare for write material + /* Prepare for write material */ BbpCsr.word = 0; BbpCsr.field.fRead = 1; BbpCsr.field.Busy = 1; @@ -337,7 +337,7 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd, RTUSBWriteMACRegister(pAd, BBP_CSR_CFG, BbpCsr.word); i = 0; - // Verify the busy condition + /* Verify the busy condition */ do { status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word); if (status >= 0) { @@ -355,9 +355,9 @@ NTSTATUS RTUSBReadBBPRegister(IN PRTMP_ADAPTER pAd, if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) { - // - // Read failed then Return Default value. - // + /* */ + /* Read failed then Return Default value. */ + /* */ *pValue = pAd->BbpWriteLatch[Id]; DBGPRINT_RAW(RT_DEBUG_ERROR, @@ -389,7 +389,7 @@ NTSTATUS RTUSBWriteBBPRegister(IN PRTMP_ADAPTER pAd, BBP_CSR_CFG_STRUC BbpCsr; UINT i = 0; NTSTATUS status; - // Verify the busy condition + /* Verify the busy condition */ do { status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word); if (status >= 0) { @@ -410,7 +410,7 @@ NTSTATUS RTUSBWriteBBPRegister(IN PRTMP_ADAPTER pAd, ("Retry count exhausted or device removed!!!\n")); return STATUS_UNSUCCESSFUL; } - // Prepare for write material + /* Prepare for write material */ BbpCsr.word = 0; BbpCsr.field.fRead = 0; BbpCsr.field.Value = Value; @@ -561,11 +561,11 @@ VOID RTUSBPutToSleep(IN PRTMP_ADAPTER pAd) { UINT32 value; - // Timeout 0x40 x 50us + /* Timeout 0x40 x 50us */ value = (SLEEPCID << 16) + (OWNERMCU << 24) + (0x40 << 8) + 1; RTUSBWriteMACRegister(pAd, 0x7010, value); RTUSBWriteMACRegister(pAd, 0x404, 0x30); - //RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); + /*RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS); */ DBGPRINT_RAW(RT_DEBUG_ERROR, ("Sleep Mailbox testvalue %x\n", value)); } @@ -959,7 +959,7 @@ NTSTATUS RTUSB_ResetDevice(IN PRTMP_ADAPTER pAd) NTSTATUS Status = TRUE; DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->USB_ResetDevice\n")); - //RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS); + /*RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS); */ return Status; } @@ -968,9 +968,9 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) PCmdQElmt cmdqelmt; PUCHAR pData; NDIS_STATUS NdisStatus = NDIS_STATUS_SUCCESS; -// ULONG Now = 0; +/* ULONG Now = 0; */ NTSTATUS ntStatus; -// unsigned long IrqFlags; +/* unsigned long IrqFlags; */ while (pAd && pAd->CmdQ.size > 0) { NdisStatus = NDIS_STATUS_SUCCESS; @@ -993,7 +993,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) UINT32 data; { - // Read GPIO pin2 as Hardware controlled radio state + /* Read GPIO pin2 as Hardware controlled radio state */ RTUSBReadMACRegister(pAd, GPIO_CTRL_CFG, @@ -1023,7 +1023,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) MlmeRadioOn (pAd); - // Update extra information + /* Update extra information */ pAd->ExtraInfo = EXTRA_INFO_CLEAR; } else { @@ -1033,7 +1033,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) MlmeRadioOff (pAd); - // Update extra information + /* Update extra information */ pAd->ExtraInfo = HW_RADIO_OFF; } @@ -1056,15 +1056,15 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) UCHAR Index; int ret = 0; PHT_TX_CONTEXT pHTTXContext; -// RTMP_TX_RING *pTxRing; +/* RTMP_TX_RING *pTxRing; */ unsigned long IrqFlags; DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT(ResetPipeid=0x%0x)===>\n", pAd->bulkResetPipeid)); - // All transfers must be aborted or cancelled before attempting to reset the pipe. - //RTUSBCancelPendingBulkOutIRP(pAd); - // Wait 10ms to let previous packet that are already in HW FIFO to clear. by MAXLEE 12-25-2007 + /* All transfers must be aborted or cancelled before attempting to reset the pipe. */ + /*RTUSBCancelPendingBulkOutIRP(pAd); */ + /* Wait 10ms to let previous packet that are already in HW FIFO to clear. by MAXLEE 12-25-2007 */ Index = 0; do { RTUSBReadMACRegister(pAd, @@ -1079,12 +1079,12 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) MACValue = 0; RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue); - // To prevent Read Register error, we 2nd check the validity. + /* To prevent Read Register error, we 2nd check the validity. */ if ((MACValue & 0xc00000) == 0) RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue); - // To prevent Read Register error, we 3rd check the validity. + /* To prevent Read Register error, we 3rd check the validity. */ if ((MACValue & 0xc00000) == 0) RTUSBReadMACRegister(pAd, USB_DMA_CFG, @@ -1093,7 +1093,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) RTUSBWriteMACRegister(pAd, USB_DMA_CFG, MACValue); - // Wait 1ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007 + /* Wait 1ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007 */ RTMPusecDelay(1000); MACValue &= (~0x80000); @@ -1102,8 +1102,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) DBGPRINT_RAW(RT_DEBUG_TRACE, ("\tSet 0x2a0 bit19. Clear USB DMA TX path\n")); - // Wait 5ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007 - //RTMPusecDelay(5000); + /* Wait 5ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007 */ + /*RTMPusecDelay(5000); */ if ((pAd-> bulkResetPipeid & @@ -1127,7 +1127,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) &(pAd-> TxContext[pAd-> bulkResetPipeid]); - //NdisAcquireSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); + /*NdisAcquireSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); */ RTMP_INT_LOCK(&pAd-> BulkOutLock[pAd-> bulkResetPipeid], @@ -1148,11 +1148,11 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) bulkResetPipeid] = 1; - // no matter what, clean the flag + /* no matter what, clean the flag */ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET); - //NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); + /*NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); */ RTMP_INT_UNLOCK(&pAd-> BulkOutLock [pAd-> @@ -1259,8 +1259,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) } } } else { - //NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); - //RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags); + /*NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]); */ + /*RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags); */ DBGPRINT_RAW (RT_DEBUG_ERROR, @@ -1338,7 +1338,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) ("\tTX Occupied by %d!\n", pendingContext)); } - // no matter what, clean the flag + /* no matter what, clean the flag */ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET); @@ -1358,7 +1358,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS); - //RTUSBKickBulkOut(pAd); + /*RTUSBKickBulkOut(pAd); */ } } @@ -1403,12 +1403,12 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_IN === >\n")); - // All transfers must be aborted or cancelled before attempting to reset the pipe. + /* All transfers must be aborted or cancelled before attempting to reset the pipe. */ { UINT32 MACValue; { - //while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) + /*while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) */ if ((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG @@ -1425,7 +1425,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) } } - // Wait 10ms before reading register. + /* Wait 10ms before reading register. */ RTMPusecDelay(10000); ntStatus = RTUSBReadMACRegister(pAd, MAC_CSR0, @@ -1505,7 +1505,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) i < pAd->CommonCfg. NumOfBulkInIRP; i++) { - //RTUSBBulkReceive(pAd); + /*RTUSBBulkReceive(pAd); */ PRX_CONTEXT pRxContext; PURB pUrb; int ret = 0; @@ -1541,11 +1541,11 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) BulkInLock, IrqFlags); - // Init Rx context descriptor + /* Init Rx context descriptor */ RTUSBInitRxDesc(pAd, pRxContext); pUrb = pRxContext->pUrb; - if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { // fail + if ((ret = RTUSB_SUBMIT_URB(pUrb)) != 0) { /* fail */ RTMP_IRQ_LOCK (&pAd-> @@ -1571,9 +1571,9 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) ret, pUrb-> status)); - } else { // success - //DBGPRINT(RT_DEBUG_TRACE, ("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", - // pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex)); + } else { /* success */ + /*DBGPRINT(RT_DEBUG_TRACE, ("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", */ + /* pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex)); */ DBGPRINT_RAW (RT_DEBUG_TRACE, ("CMDTHREAD_RESET_BULK_IN: Submit Rx URB Done, status=%d!\n", @@ -1584,7 +1584,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) } } else { - // Card must be removed + /* Card must be removed */ if (NT_SUCCESS(ntStatus) != TRUE) { RTMP_SET_FLAG(pAd, @@ -1643,7 +1643,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) MACValue)); RTUSBWriteMACRegister(pAd, offset, MACValue); - // Read bitmask + /* Read bitmask */ RTUSBReadMACRegister(pAd, offset + 4, &MACRValue); if (SetAsicWcid.DeleteTid != 0xffffffff) @@ -1693,7 +1693,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) ("Cmd : CMDTHREAD_SET_ASIC_WCID_CIPHER : WCID = %ld, Cipher = %lx.\n", SetAsicWcidAttri.WCID, SetAsicWcidAttri.Cipher)); - // Read bitmask + /* Read bitmask */ RTUSBReadMACRegister(pAd, offset, &MACRValue); MACRValue = 0; @@ -1725,10 +1725,10 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) ("2-offset = %x , MACValue= %x,\n", offset, MACRValue)); - // - // Update cipher algorithm. WSTA always use BSS0 - // - // for adhoc mode only ,because wep status slow than add key, when use zero config + /* */ + /* Update cipher algorithm. WSTA always use BSS0 */ + /* */ + /* for adhoc mode only ,because wep status slow than add key, when use zero config */ if (pAd->StaCfg.BssType == BSS_ADHOC) { offset = MAC_WCID_ATTRIBUTE_BASE; @@ -1745,7 +1745,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) offset, MACRValue); - //Update group key cipher,,because wep status slow than add key, when use zero config + /*Update group key cipher,,because wep status slow than add key, when use zero config */ RTUSBReadMACRegister(pAd, SHARED_KEY_MODE_BASE + @@ -1770,8 +1770,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) } break; -//Benson modified for USB interface, avoid in interrupt when write key, 20080724 --> - case RT_CMD_SET_KEY_TABLE: //General call for AsicAddPairwiseKeyEntry() +/*Benson modified for USB interface, avoid in interrupt when write key, 20080724 --> */ + case RT_CMD_SET_KEY_TABLE: /*General call for AsicAddPairwiseKeyEntry() */ { RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo; KeyInfo = @@ -1786,7 +1786,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) } break; - case RT_CMD_SET_RX_WCID_TABLE: //General call for RTMPAddWcidAttributeEntry() + case RT_CMD_SET_RX_WCID_TABLE: /*General call for RTMPAddWcidAttributeEntry() */ { PMAC_TABLE_ENTRY pEntry; UCHAR KeyIdx = 0; @@ -1802,7 +1802,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) pEntry); } break; -//Benson modified for USB interface, avoid in interrupt when write key, 20080724 <-- +/*Benson modified for USB interface, avoid in interrupt when write key, 20080724 <-- */ case CMDTHREAD_SET_CLIENT_MAC_ENTRY: { @@ -1865,17 +1865,17 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) DefaultKeyId]. CipherAlg, FALSE); } else { - // - // Other case, disable engine. - // Don't worry WPA key, we will add WPA Key after 4-Way handshaking. - // + /* */ + /* Other case, disable engine. */ + /* Don't worry WPA key, we will add WPA Key after 4-Way handshaking. */ + /* */ USHORT offset; offset = MAC_WCID_ATTRIBUTE_BASE + (pEntry->Aid * HW_WCID_ATTRI_SIZE); - // RX_PKEY_MODE:0 for no security; RX_KEY_TAB:0 for shared key table; BSS_IDX:0 + /* RX_PKEY_MODE:0 for no security; RX_KEY_TAB:0 for shared key table; BSS_IDX:0 */ RTUSBWriteMACRegister (pAd, offset, 0); } @@ -1894,7 +1894,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) } break; -// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet +/* add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet */ case CMDTHREAD_UPDATE_PROTECT: { AsicUpdateProtect(pAd, 0, @@ -1902,7 +1902,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) TRUE, 0); } break; -// end johnli +/* end johnli */ case OID_802_11_ADD_WEP: { @@ -1916,7 +1916,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) pWepKey = (PNDIS_802_11_WEP) pData; KeyIdx = pWepKey->KeyIndex & 0x0fffffff; - // it is a shared key + /* it is a shared key */ if ((KeyIdx >= 4) || ((pWepKey->KeyLength != 5) && (pWepKey->KeyLength != @@ -1944,10 +1944,10 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) 5) ? CIPHER_WEP64 : CIPHER_WEP128; - // - // Change the WEP cipher to CKIP cipher if CKIP KP on. - // Funk UI or Meetinghouse UI will add ckip key from this path. - // + /* */ + /* Change the WEP cipher to CKIP cipher if CKIP KP on. */ + /* Funk UI or Meetinghouse UI will add ckip key from this path. */ + /* */ if (pAd->OpMode == OPMODE_STA) { pAd->MacTab. @@ -1968,7 +1968,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) CipherAlg = CipherAlg; if (pWepKey-> KeyIndex & 0x80000000) { - // Default key for tx (shared key) + /* Default key for tx (shared key) */ UCHAR IVEIV[8]; UINT32 WCIDAttri, Value; USHORT offset, offset2; @@ -1977,8 +1977,8 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) pAd->StaCfg. DefaultKeyId = (UCHAR) KeyIdx; - // Add BSSID to WCTable. because this is Tx wep key. - // WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:1=PAIRWISE KEY, BSSIdx is 0 + /* Add BSSID to WCTable. because this is Tx wep key. */ + /* WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:1=PAIRWISE KEY, BSSIdx is 0 */ WCIDAttri = (CipherAlg << 1) | SHAREDKEYTABLE; @@ -1991,9 +1991,9 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) RTUSBWriteMACRegister (pAd, offset, WCIDAttri); - // 1. IV/EIV - // Specify key index to find shared key. - IVEIV[3] = (UCHAR) (KeyIdx << 6); //WEP Eiv bit off. groupkey index is not 0 + /* 1. IV/EIV */ + /* Specify key index to find shared key. */ + IVEIV[3] = (UCHAR) (KeyIdx << 6); /*WEP Eiv bit off. groupkey index is not 0 */ offset = PAIRWISE_IVEIV_TABLE_BASE + @@ -2030,7 +2030,7 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) i += 4; } - // 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0 + /* 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0 */ WCIDAttri = (pAd-> SharedKey[BSS0] @@ -2109,4 +2109,4 @@ VOID CMDHandler(IN PRTMP_ADAPTER pAd) } /* end of while */ } -#endif // RTMP_MAC_USB // +#endif /* RTMP_MAC_USB // */