From: Serge Semin Date: Wed, 6 May 2020 17:42:30 +0000 (+0300) Subject: mips: MAAR: Add XPA mode support X-Git-Tag: v5.10.7~2477^2~45 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9ee195fd1be87719e5fcda4cbd7ba4454249f04f;p=platform%2Fkernel%2Flinux-rpi.git mips: MAAR: Add XPA mode support When XPA mode is enabled the normally 32-bits MAAR pair registers are extended to be of 64-bits width as in pure 64-bits MIPS architecture. In this case the MAAR registers can enable the speculative loads/stores for addresses of up to 39-bits width. But in this case the process of the MAAR initialization changes a bit. The upper 32-bits of the registers are supposed to be accessed by mean of the dedicated instructions mfhc0/mthc0 and there is a CP0.MAAR.VH bit which should be set together with CP0.MAAR.VL as indication of the boundary validity. All of these peculiarities were taken into account in this commit so the speculative loads/stores would work when XPA mode is enabled. Co-developed-by: Alexey Malahov Signed-off-by: Alexey Malahov Signed-off-by: Serge Semin Cc: Thomas Bogendoerfer Cc: Paul Burton Cc: Ralf Baechle Cc: Arnd Bergmann Cc: Rob Herring Cc: linux-pm@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Thomas Bogendoerfer --- diff --git a/arch/mips/include/asm/maar.h b/arch/mips/include/asm/maar.h index 6908b93..99f1c3e 100644 --- a/arch/mips/include/asm/maar.h +++ b/arch/mips/include/asm/maar.h @@ -32,7 +32,7 @@ unsigned platform_maar_init(unsigned num_pairs); * @upper: The highest address that the MAAR pair will affect. Must be * aligned to one byte before a 2^16 byte boundary. * @attrs: The accessibility attributes to program, eg. MIPS_MAAR_S. The - * MIPS_MAAR_VL attribute will automatically be set. + * MIPS_MAAR_VL/MIPS_MAAR_VH attributes will automatically be set. * * Program the pair of MAAR registers specified by idx to apply the attributes * specified by attrs to the range of addresses from lower to higher. @@ -48,17 +48,30 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower, /* Automatically set MIPS_MAAR_VL */ attrs |= MIPS_MAAR_VL; - /* Write the upper address & attributes (only MIPS_MAAR_VL matters) */ + /* + * Write the upper address & attributes (both MIPS_MAAR_VL and + * MIPS_MAAR_VH matter) + */ write_c0_maari(idx << 1); back_to_back_c0_hazard(); write_c0_maar(((upper >> 4) & MIPS_MAAR_ADDR) | attrs); back_to_back_c0_hazard(); +#ifdef CONFIG_XPA + upper >>= MIPS_MAARX_ADDR_SHIFT; + writex_c0_maar(((upper >> 4) & MIPS_MAARX_ADDR) | MIPS_MAARX_VH); + back_to_back_c0_hazard(); +#endif /* Write the lower address & attributes */ write_c0_maari((idx << 1) | 0x1); back_to_back_c0_hazard(); write_c0_maar((lower >> 4) | attrs); back_to_back_c0_hazard(); +#ifdef CONFIG_XPA + lower >>= MIPS_MAARX_ADDR_SHIFT; + writex_c0_maar(((lower >> 4) & MIPS_MAARX_ADDR) | MIPS_MAARX_VH); + back_to_back_c0_hazard(); +#endif } /** diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 90f843c..238adce 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -761,6 +761,14 @@ #define MIPS_MAAR_ADDR_SHIFT 12 #define MIPS_MAAR_S (_ULCAST_(1) << 1) #define MIPS_MAAR_VL (_ULCAST_(1) << 0) +#ifdef CONFIG_XPA +#define MIPS_MAAR_V (MIPS_MAAR_VH | MIPS_MAAR_VL) +#else +#define MIPS_MAAR_V MIPS_MAAR_VL +#endif +#define MIPS_MAARX_VH (_ULCAST_(1) << 31) +#define MIPS_MAARX_ADDR 0xF +#define MIPS_MAARX_ADDR_SHIFT 32 /* MAARI bit definitions */ #define MIPS_MAARI_INDEX (_ULCAST_(0x3f) << 0) @@ -1723,6 +1731,8 @@ do { \ #define write_c0_lladdr(val) __write_ulong_c0_register($17, 0, val) #define read_c0_maar() __read_ulong_c0_register($17, 1) #define write_c0_maar(val) __write_ulong_c0_register($17, 1, val) +#define readx_c0_maar() __readx_32bit_c0_register($17, 1) +#define writex_c0_maar(val) __writex_32bit_c0_register($17, 1, val) #define read_c0_maari() __read_32bit_c0_register($17, 2) #define write_c0_maari(val) __write_32bit_c0_register($17, 2, val) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 7968400..620ebfa 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -358,17 +358,23 @@ void maar_init(void) write_c0_maari(i); back_to_back_c0_hazard(); upper = read_c0_maar(); +#ifdef CONFIG_XPA + upper |= (phys_addr_t)readx_c0_maar() << MIPS_MAARX_ADDR_SHIFT; +#endif write_c0_maari(i + 1); back_to_back_c0_hazard(); lower = read_c0_maar(); +#ifdef CONFIG_XPA + lower |= (phys_addr_t)readx_c0_maar() << MIPS_MAARX_ADDR_SHIFT; +#endif attr = lower & upper; lower = (lower & MIPS_MAAR_ADDR) << 4; upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff; pr_info(" [%d]: ", i / 2); - if (!(attr & MIPS_MAAR_VL)) { + if ((attr & MIPS_MAAR_V) != MIPS_MAAR_V) { pr_cont("disabled\n"); continue; }