From: Bruno Randolf Date: Wed, 19 May 2010 01:31:00 +0000 (+0900) Subject: ath5k: move noise floor calibration into tasklet X-Git-Tag: v2.6.36-rc1~571^2~107^2~431 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9e04a7eb1fdf37bc8bc0d0f59e5fb737926f0152;p=platform%2Fkernel%2Flinux-stable.git ath5k: move noise floor calibration into tasklet Seperate noise floor calibration from other PHY calibration and move it to the tasklet. This is the first step to more separation of different calibrations. Also move out ath5k_hw_request_rfgain_probe(ah) so we have one clean function for I/Q calibration on 5111x parts. Signed-off-by: Bruno Randolf Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 2785946..131e8b3 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -1270,6 +1270,7 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel); void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah); int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel); +void ath5k_hw_update_noise_floor(struct ath5k_hw *ah); /* Spur mitigation */ bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, struct ieee80211_channel *channel); diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 59268d1..3d854f0 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2807,6 +2807,7 @@ ath5k_tasklet_calibrate(unsigned long data) ieee80211_frequency_to_channel( sc->curchan->center_freq)); + ath5k_hw_update_noise_floor(ah); /* Wake queues */ ieee80211_wake_queues(sc->hw); diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 1b81c47..2b298ea 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -1167,7 +1167,7 @@ static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah) * The median of the values in the history is then loaded into the * hardware for its own use for RSSI and CCA measurements. */ -static void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) +void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; u32 val; @@ -1248,7 +1248,6 @@ static void ath5k_hw_update_noise_floor(struct ath5k_hw *ah) /* * Perform a PHY calibration on RF5110 * -Fix BPSK/QAM Constellation (I/Q correction) - * -Calculate Noise Floor */ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) @@ -1335,8 +1334,6 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, return ret; } - ath5k_hw_update_noise_floor(ah); - /* * Re-enable RX/TX and beacons */ @@ -1348,10 +1345,10 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, } /* - * Perform a PHY calibration on RF5111/5112 and newer chips + * Perform I/Q calibration on RF5111/5112 and newer chips */ -static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, - struct ieee80211_channel *channel) +static int +ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah) { u32 i_pwr, q_pwr; s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; @@ -1360,10 +1357,9 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, if (!ah->ah_calibration || ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) - goto done; + return 0; /* Calibration has finished, get the results and re-run */ - /* work around empty results which can apparently happen on 5212 */ for (i = 0; i <= 10; i++) { iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); @@ -1384,7 +1380,7 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, /* protect against divide by 0 and loss of sign bits */ if (i_coffd == 0 || q_coffd < 2) - goto done; + return -1; i_coff = (-iq_corr) / i_coffd; i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */ @@ -1410,17 +1406,6 @@ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN); -done: - - /* TODO: Separate noise floor calibration from I/Q calibration - * since noise floor calibration interrupts rx path while I/Q - * calibration doesn't. We don't need to run noise floor calibration - * as often as I/Q calibration.*/ - ath5k_hw_update_noise_floor(ah); - - /* Initiate a gain_F calibration */ - ath5k_hw_request_rfgain_probe(ah); - return 0; } @@ -1434,8 +1419,10 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, if (ah->ah_radio == AR5K_RF5110) ret = ath5k_hw_rf5110_calibrate(ah, channel); - else - ret = ath5k_hw_rf511x_calibrate(ah, channel); + else { + ret = ath5k_hw_rf511x_iq_calibrate(ah); + ath5k_hw_request_rfgain_probe(ah); + } return ret; }