From: Simon Goldschmidt Date: Tue, 9 Apr 2019 19:02:06 +0000 (+0200) Subject: arm: socfpga: gen5: reduce SPL pre-reloc malloc X-Git-Tag: v2019.07-rc1~6^2~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9dc61aac2ddc05b7118599c12c2a390d642189af;p=platform%2Fkernel%2Fu-boot.git arm: socfpga: gen5: reduce SPL pre-reloc malloc By enabling debug prints in malloc_simple, we can see that SPL for socfpga gen5 does by far not need the 8 KiB malloc pool currently allocated for SPL in pre-reloc phase. On socfpga_socrates, 1304 bytes are currently used (and this increases by ~200 bytes only for the sdram/reset fixes in socfpga-next). To prevent wasting precious SRAM space, let's reduce the initial heap used for SPL to 2 KiB. This is still some hundred bytes more than currently used. Also, the gen5 SPL enables stack and heap in DDR memory pretty early. Only the initial uclass/dm parsing, serial console and DDR initialization is done in the initial heap, so these 2 KiB should be enough for all boards. Signed-off-by: Simon Goldschmidt Acked-by: Marek Vasut --- diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 3c6c63067d..8f7b79f586 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -6,6 +6,9 @@ config NR_DRAM_BANKS config SPL_STACK_R_ADDR default 0x00800000 if TARGET_SOCFPGA_GEN5 +config SPL_SYS_MALLOC_F_LEN + default 0x800 if TARGET_SOCFPGA_GEN5 + config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE default 0xa2