From: Jim Blandy Date: Sun, 20 Nov 2005 06:12:59 +0000 (+0000) Subject: gdb/doc/ChangeLog: X-Git-Tag: gdb-csl-20060226-branchpoint~695 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9d29849ad8657f07cf5b1b4cb680630fcf5f3efa;p=platform%2Fupstream%2Fbinutils.git gdb/doc/ChangeLog: 2005-11-19 Jim Blandy * gdb.texinfo (Tracepoint Packets): New node. (General Query Packets): Add entries for the tracepoint packets, referring to the "Tracepoint Packets" node. (Tracepoints): Add reference to "Tracepoint Packets". --- diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index ccdc471..1eaf65c 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,10 @@ +2005-11-19 Jim Blandy + + * gdb.texinfo (Tracepoint Packets): New node. + (General Query Packets): Add entries for the tracepoint packets, + referring to the "Tracepoint Packets" node. + (Tracepoints): Add reference to "Tracepoint Packets". + 2005-11-18 Kevin Buettner * gdb.texinfo (set remotebreak): Add anchor. diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index b6c1ed6..d749732 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -7126,10 +7126,12 @@ values without interacting with you, it can do so quickly and unobtrusively, hopefully not disturbing the program's behavior. The tracepoint facility is currently available only for remote -targets. @xref{Targets}. In addition, your remote target must know how -to collect trace data. This functionality is implemented in the remote -stub; however, none of the stubs distributed with @value{GDBN} support -tracepoints as of this writing. +targets. @xref{Targets}. In addition, your remote target must know +how to collect trace data. This functionality is implemented in the +remote stub; however, none of the stubs distributed with @value{GDBN} +support tracepoints as of this writing. The format of the remote +packets used to implement tracepoints are described in @ref{Tracepoint +Packets}. This chapter describes the tracepoint commands and features. @@ -22017,6 +22019,7 @@ Show the current setting of the target wait timeout. * Stop Reply Packets:: * General Query Packets:: * Register Packet Format:: +* Tracepoint Packets:: * Interrupts:: * Examples:: * File-I/O remote protocol extension:: @@ -23029,6 +23032,10 @@ encoded). @value{GDBN} will continue to supply the values of symbols (if available), until the target ceases to request them. @end table +@item QTDP +@itemx QTFrame +@xref{Tracepoint Packets}. + @item qThreadExtraInfo,@var{id} @cindex thread attributes info, remote request @cindex @samp{qThreadExtraInfo} packet @@ -23048,6 +23055,13 @@ comprising the printable string containing the extra information about the thread's attributes. @end table +@item QTStart +@itemx QTStop +@itemx QTinit +@itemx QTro +@itemx qTStatus +@xref{Tracepoint Packets}. + @end table @node Register Packet Format @@ -23076,6 +23090,167 @@ as @code{MIPS32}. @end table +@node Tracepoint Packets +@section Tracepoint Packets +@cindex tracepoint packets +@cindex packets, tracepoint + +Here we describe the packets @value{GDBN} uses to implement +tracepoints (@pxref{Tracepoints}). + +@table @samp + +@item QTDP:@var{n}:@var{addr}:@var{ena}:@var{step}:@var{pass}@r{[}-@r{]} +Create a new tracepoint, number @var{n}, at @var{addr}. If @var{ena} +is @samp{E}, then the tracepoint is enabled; if it is @samp{D}, then +the tracepoint is disabled. @var{step} is the tracepoint's step +count, and @var{pass} is its pass count. If the trailing @samp{-} is +present, further @samp{QTDP} packets will follow to specify this +tracepoint's actions. + +Replies: +@table @samp +@item OK +The packet was understood and carried out. +@item +The packet was not recognized. +@end table + +@item QTDP:-@var{n}:@var{addr}:@r{[}S@r{]}@var{action}@dots{}@r{[}-@r{]} +Define actions to be taken when a tracepoint is hit. @var{n} and +@var{addr} must be the same as in the initial @samp{QTDP} packet for +this tracepoint. This packet may only be sent immediately after +another @samp{QTDP} packet that ended with a @samp{-}. If the +trailing @samp{-} is present, further @samp{QTDP} packets will follow, +specifying more actions for this tracepoint. + +In the series of action packets for a given tracepoint, at most one +can have an @samp{S} before its first @var{action}. If such a packet +is sent, it and the following packets define ``while-stepping'' +actions. Any prior packets define ordinary actions --- that is, those +taken when the tracepoint is first hit. If no action packet has an +@samp{S}, then all the packets in the series specify ordinary +tracepoint actions. + +The @samp{@var{action}@dots{}} portion of the packet is a series of +actions, concatenated without separators. Each action has one of the +following forms: + +@table @samp + +@item R @var{mask} +Collect the registers whose bits are set in @var{mask}. @var{mask} is +a hexidecimal number whose @var{i}'th bit is set if register number +@var{i} should be collected. (The least significant bit is numbered +zero.) Note that @var{mask} may be any number of digits long; it may +not fit in a 32-bit word. + +@item M @var{basereg},@var{offset},@var{len} +Collect @var{len} bytes of memory starting at the address in register +number @var{basereg}, plus @var{offset}. If @var{basereg} is +@samp{-1}, then the range has a fixed address: @var{offset} is the +address of the lowest byte to collect. The @var{basereg}, +@var{offset}, and @var{len} parameters are all unsigned hexidecimal +values (the @samp{-1} value for @var{basereg} is a special case). + +@item X @var{len},@var{expr} +Evaluate @var{expr}, whose length is @var{len}, and collect memory as +it directs. @var{expr} is an agent expression, as described in +@ref{Agent Expressions}. Each byte of the expression is encoded as a +two-digit hex number in the packet; @var{len} is the number of bytes +in the expression (and thus one-half the number of hex digits in the +packet). + +@end table + +Any number of actions may be packed together in a single @samp{QTDP} +packet, as long as the packet does not exceed the maximum packet +length (400 bytes, for many stubs). + +Replies: +@table @samp +@item OK +The packet was understood and carried out. +@item +The packet was not recognized. +@end table + +@item QTFrame:@var{n} +Select the @var{n}'th tracepoint frame from the buffer, and use the +register and memory contents recorded there to answer subsequent +request packets from @value{GDBN}. + +A successful reply from the stub indicates that the stub has found the +requested frame. The response is a series of parts, concatenated +without separators, describing the frame we selected. Each part has +one of the following forms: + +@table @samp +@item F @var{f} +The selected frame is number @var{n} in the trace frame buffer; +@var{f} is a hexidecimal number. If @var{f} is @samp{-1}, then there +was no frame matching the criteria in the request packet. + +@item T @var{t} +The selected trace frame records a hit of tracepoint number @var{t}; +@var{t} is a hexidecimal number. + +@end table + +@item QTFrame:pc:@var{addr} +Like @samp{QTFrame:@var{n}}, but select the first tracepoint frame after the +currently selected frame whose PC is @var{addr}; +@var{addr} is a hexidecimal number. + +@item QTFrame:tdp:@var{t} +Like @samp{QTFrame:@var{n}}, but select the first tracepoint frame after the +currently selected frame that is a hit of tracepoint @var{t}; @var{t} +is a hexidecimal number. + +@item QTFrame:range:@var{start}:@var{end} +Like @samp{QTFrame:@var{n}}, but select the first tracepoint frame after the +currently selected frame whose PC is between @var{start} (inclusive) +and @var{end} (exclusive); @var{start} and @var{end} are hexidecimal +numbers. + +@item QTFrame:outside:@var{start}:@var{end} +Like @samp{QTFrame:range:@var{start}:@var{end}}, but select the first +frame @emph{outside} the given range of addresses. + +@item QTStart +Begin the tracepoint experiment. Begin collecting data from tracepoint +hits in the trace frame buffer. + +@item QTStop +End the tracepoint experiment. Stop collecting trace frames. + +@item QTinit +Clear the table of tracepoints, and empty the trace frame buffer. + +@item QTro:@var{start1},@var{end1}:@var{start2},@var{end2}:@dots{} +Establish the given ranges of memory as ``transparent''. The stub +will answer requests for these ranges from memory's current contents, +if they were not collected as part of the tracepoint hit. + +@value{GDBN} uses this to mark read-only regions of memory, like those +containing program code. Since these areas never change, they should +still have the same contents they did when the tracepoint was hit, so +there's no reason for the stub to refuse to provide their contents. + +@item qTStatus +Ask the stub if there is a trace experiment running right now. + +Replies: +@table @samp +@item T0 +There is no trace experiment running. +@item T1 +There is a trace experiment running. +@end table + +@end table + + @node Interrupts @section Interrupts @cindex interrupts (remote protocol)