From: Jason Martinsen Date: Tue, 18 Dec 2018 05:38:22 +0000 (+0000) Subject: lan78xx: Resolve issue with changing MAC address X-Git-Tag: v4.14.93~64 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9c5239ee1c3f59e1ece9072cae57af8b601e0b99;p=platform%2Fkernel%2Flinux-exynos.git lan78xx: Resolve issue with changing MAC address [ Upstream commit 15515aaaa69659c502003926a2067ee76176148a ] Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown modify entry in /etc/network/interfaces OR a similar method ifup Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by: Jason Martinsen ----- Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index e069b31..b62c411 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2212,6 +2212,10 @@ static int lan78xx_set_mac_addr(struct net_device *netdev, void *p) ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo); ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi); + /* Added to support MAC address changes */ + ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo); + ret = lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_); + return 0; }