From: Yaniv Rosner Date: Mon, 1 Nov 2010 05:32:27 +0000 (+0000) Subject: bnx2x: Fix waiting for reset complete on BCM848x3 PHYs X-Git-Tag: v2.6.37-rc2~20^2~78 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9bffeac1eabe4162f5696f0d7f60aa32668f5061;p=profile%2Fcommon%2Fkernel-common.git bnx2x: Fix waiting for reset complete on BCM848x3 PHYs BCM848x3 requires additional of 50ms after reset done indication, instead of fixed time of 200ms Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 89b33e2..b6588c5 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -5302,7 +5302,7 @@ static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; u16 autoneg_val, an_1000_val, an_10_100_val; - bnx2x_wait_reset_complete(bp, phy); + bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4, 1 << NIG_LATCH_BC_ENABLE_MI_INT); @@ -5431,6 +5431,7 @@ static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy, /* HW reset */ bnx2x_ext_phy_hw_reset(bp, params->port); + bnx2x_wait_reset_complete(bp, phy); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); return bnx2x_848xx_cmn_config_init(phy, params, vars); @@ -5453,8 +5454,9 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); - msleep(200); /* 100 is not enough */ - + bnx2x_wait_reset_complete(bp, phy); + /* Wait for GPHY to come out of reset */ + msleep(50); /* BCM84823 requires that XGXS links up first @ 10G for normal behavior */ temp = vars->line_speed;