From: Miquel Raynal Date: Mon, 8 Apr 2019 08:31:45 +0000 (+0200) Subject: mtd: rawnand: marvell: Clean the controller state before each operation X-Git-Tag: v5.4-rc1~1155^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9a8f612ca0d6a436e6471c9bed516d34a2cc626f;p=platform%2Fkernel%2Flinux-rpi.git mtd: rawnand: marvell: Clean the controller state before each operation Since the migration of the driver to stop using the legacy ->select_chip() hook, there is nothing deselecting the target anymore, thus the selection is not forced at the next access. Ensure the ND_RUN bit and the interrupts are always in a clean state. Cc: Daniel Mack Cc: stable@vger.kernel.org Fixes: b25251414f6e00 ("mtd: rawnand: marvell: Stop implementing ->select_chip()") Suggested-by: Boris Brezillon Signed-off-by: Miquel Raynal Tested-by: Daniel Mack Reviewed-by: Boris Brezillon Signed-off-by: Richard Weinberger --- diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index f38e5c1..d984538 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -722,12 +722,6 @@ static void marvell_nfc_select_target(struct nand_chip *chip, struct marvell_nfc *nfc = to_marvell_nfc(chip->controller); u32 ndcr_generic; - if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die) - return; - - writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0); - writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1); - /* * Reset the NDCR register to a clean state for this particular chip, * also clear ND_RUN bit. @@ -739,6 +733,12 @@ static void marvell_nfc_select_target(struct nand_chip *chip, /* Also reset the interrupt status register */ marvell_nfc_clear_int(nfc, NDCR_ALL_INT); + if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die) + return; + + writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0); + writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1); + nfc->selected_chip = chip; marvell_nand->selected_die = die_nr; }