From: Ian Molton Date: Mon, 13 Nov 2017 20:35:44 +0000 (+0100) Subject: brcmfmac: Remove brcmf_sdiod_request_data() X-Git-Tag: v4.19~1702^2~329^2~39 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=993a98a42e6e790fd0d2bf7d55a031513c7ba7dc;p=platform%2Fkernel%2Flinux-rpi.git brcmfmac: Remove brcmf_sdiod_request_data() This function is obfuscating how IO works on this chip. Remove it and push its logic into brcmf_sdiod_reg_{read,write}(). Handling of -ENOMEDIUM is altered, but as that's pretty much broken anyway we can ignore that. Signed-off-by: Ian Molton Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c index 355aebd..bb2ebe6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c @@ -230,6 +230,43 @@ void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev, sdiodev->state = state; } +static int brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, + u32 address) +{ + int err = 0, i; + u32 addr; + + if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM) + return -ENOMEDIUM; + + addr = (address & SBSDIO_SBWINDOW_MASK) >> 8; + + for (i = 0 ; i < 3 && !err ; i++, addr >>= 8) + brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, + addr & 0xff, &err); + + return err; +} + +static int brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr) +{ + uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK; + int err = 0; + + if (bar0 != sdiodev->sbwad) { + err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0); + if (err) + return err; + + sdiodev->sbwad = bar0; + } + + *addr &= SBSDIO_SB_OFT_ADDR_MASK; + *addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; + + return 0; +} + static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte, uint regaddr) { @@ -249,173 +286,84 @@ static inline int brcmf_sdiod_f0_writeb(struct sdio_func *func, u8 byte, return err_ret; } -static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn, - u32 addr, u8 regsz, void *data, bool write) -{ - struct sdio_func *func; - int ret = -EINVAL; - - brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n", - write, fn, addr, regsz); - - /* only allow byte access on F0 */ - if (WARN_ON(regsz > 1 && !fn)) - return -EINVAL; - func = sdiodev->func[fn]; - - switch (regsz) { - case 1: - if (write) { - if (fn) - sdio_writeb(func, *(u8 *)data, addr, &ret); - else - ret = brcmf_sdiod_f0_writeb(func, *(u8 *)data, - addr); - } else { - if (fn) - *(u8 *)data = sdio_readb(func, addr, &ret); - else - *(u8 *)data = sdio_f0_readb(func, addr, &ret); - } - break; - case 2: - if (write) - sdio_writew(func, *(u16 *)data, addr, &ret); - else - *(u16 *)data = sdio_readw(func, addr, &ret); - break; - case 4: - if (write) - sdio_writel(func, *(u32 *)data, addr, &ret); - else - *(u32 *)data = sdio_readl(func, addr, &ret); - break; - default: - brcmf_err("invalid size: %d\n", regsz); - break; - } - - if (ret) - brcmf_dbg(SDIO, "failed to %s data F%d@0x%05x, err: %d\n", - write ? "write" : "read", fn, addr, ret); - - return ret; -} - static int brcmf_sdiod_reg_write(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 regsz, void *data) { - u8 func; - s32 retry = 0; int ret; - if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM) - return -ENOMEDIUM; - /* * figure out how to read the register based on address range * 0x00 ~ 0x7FF: function 0 CCCR and FBR * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers * The rest: function 1 silicon backplane core registers + * f0 writes must be bytewise */ - if ((addr & ~REG_F0_REG_MASK) == 0) - func = SDIO_FUNC_0; - else - func = SDIO_FUNC_1; - do { - /* for retry wait for 1 ms till bus get settled down */ - if (retry) - usleep_range(1000, 2000); - - ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz, - data, true); - - } while (ret != 0 && ret != -ENOMEDIUM && - retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); + if ((addr & ~REG_F0_REG_MASK) == 0) { + if (WARN_ON(regsz > 1)) + return -EINVAL; + ret = brcmf_sdiod_f0_writeb(sdiodev->func[0], + *(u8 *)data, addr); + } else { + switch (regsz) { + case 1: + sdio_writeb(sdiodev->func[1], *(u8 *)data, addr, &ret); + break; + case 4: + ret = brcmf_sdiod_addrprep(sdiodev, &addr); + if (ret) + goto done; - if (ret == -ENOMEDIUM) - brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM); + sdio_writel(sdiodev->func[1], *(u32 *)data, addr, &ret); + break; + default: + WARN(1, "Invalid reg size\n"); + ret = -EINVAL; + break; + } + } +done: return ret; } static int brcmf_sdiod_reg_read(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 regsz, void *data) { - u8 func; - s32 retry = 0; int ret; - if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM) - return -ENOMEDIUM; - /* * figure out how to read the register based on address range * 0x00 ~ 0x7FF: function 0 CCCR and FBR * 0x10000 ~ 0x1FFFF: function 1 miscellaneous registers * The rest: function 1 silicon backplane core registers + * f0 reads must be bytewise */ - if ((addr & ~REG_F0_REG_MASK) == 0) - func = SDIO_FUNC_0; - else - func = SDIO_FUNC_1; - - do { - memset(data, 0, regsz); - - /* for retry wait for 1 ms till bus get settled down */ - if (retry) - usleep_range(1000, 2000); - - ret = brcmf_sdiod_request_data(sdiodev, func, addr, regsz, - data, false); - - } while (ret != 0 && ret != -ENOMEDIUM && - retry++ < SDIOH_API_ACCESS_RETRY_LIMIT); - - if (ret == -ENOMEDIUM) - brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM); - - return ret; -} - -static int -brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address) -{ - int err = 0, i; - u32 addr; - - if (sdiodev->state == BRCMF_SDIOD_NOMEDIUM) - return -ENOMEDIUM; - - addr = (address & SBSDIO_SBWINDOW_MASK) >> 8; - - for (i = 0 ; i < 3 && !err ; i++, addr >>= 8) - brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SBADDRLOW + i, - addr & 0xff, &err); - - return err; -} - -static int -brcmf_sdiod_addrprep(struct brcmf_sdio_dev *sdiodev, u32 *addr) -{ - uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK; - int err = 0; - - if (bar0 != sdiodev->sbwad) { - err = brcmf_sdiod_set_sbaddr_window(sdiodev, bar0); - if (err) - return err; + if ((addr & ~REG_F0_REG_MASK) == 0) { + if (WARN_ON(regsz > 1)) + return -EINVAL; + *(u8 *)data = sdio_f0_readb(sdiodev->func[0], addr, &ret); + } else { + switch (regsz) { + case 1: + *(u8 *)data = sdio_readb(sdiodev->func[1], addr, &ret); + break; + case 4: + ret = brcmf_sdiod_addrprep(sdiodev, &addr); + if (ret) + goto done; - sdiodev->sbwad = bar0; + *(u32 *)data = sdio_readl(sdiodev->func[1], addr, &ret); + break; + default: + WARN(1, "Invalid reg size\n"); + ret = -EINVAL; + break; + } } - *addr &= SBSDIO_SB_OFT_ADDR_MASK; - *addr |= SBSDIO_SB_ACCESS_2_4B_FLAG; - - return 0; +done: + return ret; } u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) @@ -439,15 +387,9 @@ u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret) int retval; brcmf_dbg(SDIO, "addr:0x%08x\n", addr); - retval = brcmf_sdiod_addrprep(sdiodev, &addr); - if (retval) - goto done; - retval = brcmf_sdiod_reg_read(sdiodev, addr, 4, &data); - brcmf_dbg(SDIO, "data:0x%08x\n", data); -done: if (ret) *ret = retval; @@ -472,13 +414,8 @@ void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, int retval; brcmf_dbg(SDIO, "addr:0x%08x, data:0x%08x\n", addr, data); - retval = brcmf_sdiod_addrprep(sdiodev, &addr); - if (retval) - goto done; - retval = brcmf_sdiod_reg_write(sdiodev, addr, 4, &data); -done: if (ret) *ret = retval; } @@ -886,14 +823,12 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, return bcmerror; } -int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn) +int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn) { - char t_func = (char)fn; brcmf_dbg(SDIO, "Enter\n"); /* issue abort cmd52 command through F0 */ - brcmf_sdiod_request_data(sdiodev, SDIO_FUNC_0, SDIO_CCCR_ABORT, - 1, &t_func, true); + brcmf_sdiod_reg_write(sdiodev, SDIO_CCCR_ABORT, 1, &fn); brcmf_dbg(SDIO, "Exit\n"); return 0; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h index e3b78db..1e4b476 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h @@ -339,7 +339,7 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address, u8 *data, uint size); /* Issue an abort to the specified function */ -int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn); +int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn); void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev); void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev, enum brcmf_sdiod_state state);