From: Grygorii Strashko Date: Mon, 8 May 2017 19:21:21 +0000 (-0500) Subject: net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control X-Git-Tag: v4.9.94~293 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=988ef9c8c29ccc9949a18b599df463ebd653daef;p=platform%2Fkernel%2Flinux-amlogic.git net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control [ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ] When users set flow control using ethtool the bits are set properly in the CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size reset value. When receive flow control is enabled on a port, the port's associated FIFO block allocation must be adjusted. The port RX allocation must increase to accommodate the flow control runout. The TRM recommends numbers of 5 or 6. Hence, apply required Port FIFO configuration to Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during interface initialization. Cc: Schuyler Patton Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 2bd1282..552de9c 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -282,6 +282,10 @@ struct cpsw_ss_regs { /* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */ #define CPSW_V1_SEQ_ID_OFS_SHIFT 16 +#define CPSW_MAX_BLKS_TX 15 +#define CPSW_MAX_BLKS_TX_SHIFT 4 +#define CPSW_MAX_BLKS_RX 5 + struct cpsw_host_regs { u32 max_blks; u32 blk_cnt; @@ -1160,11 +1164,23 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv) switch (cpsw->version) { case CPSW_VERSION_1: slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS); break; case CPSW_VERSION_2: case CPSW_VERSION_3: case CPSW_VERSION_4: slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS); break; }