From: Geert Uytterhoeven Date: Wed, 27 Oct 2021 12:34:32 +0000 (+0200) Subject: dt-bindings: mfd: bd9571mwv: Convert to json-schema X-Git-Tag: v6.6.17~8466^2~17 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=983b62975e903a9a92ea3a3daef43e2a32cc8479;p=platform%2Fkernel%2Flinux-rpi.git dt-bindings: mfd: bd9571mwv: Convert to json-schema Convert the ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) Device Tree binding documentation to json-schema. Make the "regulators" subnode optional, as not all users describe the regulators. Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Acked-by: Matti Vaittinen Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/76fdd209e6a2dada7ff50b8ad03eb14e7f3547a6.1635338031.git.geert+renesas@glider.be --- diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt deleted file mode 100644 index 1d6413e..0000000 --- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt +++ /dev/null @@ -1,69 +0,0 @@ -* ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) bindings - -Required properties: - - compatible : Should be "rohm,bd9571mwv" or "rohm,bd9574mwf". - - reg : I2C slave address. - - interrupts : The interrupt line the device is connected to. - - interrupt-controller : Marks the device node as an interrupt controller. - - #interrupt-cells : The number of cells to describe an IRQ, should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as trigger - masks from ../interrupt-controller/interrupts.txt. - - gpio-controller : Marks the device node as a GPIO Controller. - - #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify flags. - See ../gpio/gpio.txt for more information. - - regulators: : List of child nodes that specify the regulator - initialization data. Child nodes must be named - after their hardware counterparts: - - vd09 - - vd18 - - vd25 - - vd33 - - dvfs - Each child node is defined using the standard - binding for regulators. - -Optional properties: - - rohm,ddr-backup-power : Value to use for DDR-Backup Power (default 0). - This is a bitmask that specifies which DDR power - rails need to be kept powered when backup mode is - entered, for system suspend: - - bit 0: DDR0 - - bit 1: DDR1 - - bit 2: DDR0C - - bit 3: DDR1C - These bits match the KEEPON_DDR* bits in the - documentation for the "BKUP Mode Cnt" register. - - rohm,rstbmode-level: The RSTB signal is configured for level mode, to - accommodate a toggle power switch (the RSTBMODE pin is - strapped low). - - rohm,rstbmode-pulse: The RSTB signal is configured for pulse mode, to - accommodate a momentary power switch (the RSTBMODE pin - is strapped high). - The two properties above are mutually exclusive. - -Example: - - pmic: pmic@30 { - compatible = "rohm,bd9571mwv"; - reg = <0x30>; - interrupt-parent = <&gpio2>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - rohm,ddr-backup-power = <0xf>; - rohm,rstbmode-pulse; - - regulators { - dvfs: dvfs { - regulator-name = "dvfs"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1030000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml new file mode 100644 index 0000000..89f9efe --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) + +maintainers: + - Marek Vasut + +properties: + compatible: + enum: + - rohm,bd9571mwv + - rohm,bd9574mwf + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rohm,ddr-backup-power: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0x0 + maximum: 0xf + description: | + Value to use for DDR-Backup Power (default 0). + This is a bitmask that specifies which DDR power rails need to be kept + powered when backup mode is entered, for system suspend: + - bit 0: DDR0 + - bit 1: DDR1 + - bit 2: DDR0C + - bit 3: DDR1C + These bits match the KEEPON_DDR* bits in the documentation for the "BKUP + Mode Cnt" register. + + rohm,rstbmode-level: + $ref: /schemas/types.yaml#/definitions/flag + description: + The RSTB signal is configured for level mode, to accommodate a toggle + power switch (the RSTBMODE pin is strapped low). + + rohm,rstbmode-pulse: + $ref: /schemas/types.yaml#/definitions/flag + description: + The RSTB signal is configured for pulse mode, to accommodate a momentary + power switch (the RSTBMODE pin is strapped high). + + regulators: + type: object + description: + List of child nodes that specify the regulator initialization data. + Child nodes must be named after their hardware counterparts. + + patternProperties: + "^(vd09|vd18|vd25|vd33|dvfs)$": + type: object + $ref: ../regulator/regulator.yaml# + + properties: + regulator-name: + pattern: "^(vd09|vd18|vd25|vd33|dvfs)$" + + unevaluatedProperties: false + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + +oneOf: + - required: + - rohm,rstbmode-level + - required: + - rohm,rstbmode-pulse + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic: pmic@30 { + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0xf>; + rohm,rstbmode-pulse; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + };