From: Jason Molenda <jmolenda@apple.com>
Date: Mon, 19 Jul 1999 23:32:44 +0000 (+0000)
Subject: 1999-07-19  Jason Molenda  (jsm@bugshack.cygnus.com)
X-Git-Tag: gdb-1999-07-26~24
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=97ab6f9f4b628b83ec43d16f2c5ff1ede1502242;p=platform%2Fupstream%2Fbinutils.git

1999-07-19  Jason Molenda  (jsm@bugshack.cygnus.com)

	* a1-selftest.exp, pointers2.c, pointers2.exp: These files were
	renamed as of this snapshot.
---

diff --git a/gdb/testsuite/gdb.base/a1-selftest.exp b/gdb/testsuite/gdb.base/a1-selftest.exp
deleted file mode 100644
index c0d17c8..0000000
--- a/gdb/testsuite/gdb.base/a1-selftest.exp
+++ /dev/null
@@ -1,430 +0,0 @@
-#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-
-# This file was written by Rob Savoye. (rob@cygnus.com)
-
-if $tracelevel then {
-    strace $tracelevel
-}
-
-set prms_id 0
-set bug_id 0
-
-# are we on a target board
-if [is_remote target] {
-    return
-}
-
-if [istarget "m68k*-*-hpux*"] then {
-    # The top-level makefile passes CFLAGS= (no -g) for hp300.  This probably
-    # should be fixed (it is only needed for gcc bootstrapping, not gdb),
-    # but until then.....
-    setup_xfail "*-*-*"
-    fail "cannot test self if compiled without debug info"
-    return -1
-}
-
-# Not all of the lines of code near the start of main are executed for
-# every machine.  Also, optimization may reorder some of the lines.
-# So all we do is try to step or next over everything until we get
-# to a line that we know is always executed.
-
-proc do_steps_and_nexts {} {
-    global gdb_prompt
-    global srcdir
- 
-    gdb_reinitialize_dir $srcdir/..
-
-    for {set count 0} {$count < 20} {incr count} {
-	send_gdb "list\n"
-	gdb_expect {
-	    -re ".*symarg = NULL.*$gdb_prompt $" {
-		set description "step over symarg initialization"
-		set command "step"
-	    }
-	    -re ".*execarg = NULL.*$gdb_prompt $" {
-		set description "step over execarg initialization"
-		set command "step"
-	    }
-	    -re ".*corearg = NULL.*$gdb_prompt $" {
-		set description "step over corearg initialization"
-		set command "step"
-	    }
-	    -re ".*cdarg = NULL.*$gdb_prompt $" {
-		set description "step over cdarg initialization"
-		set command "step"
-	    }
-	    -re ".*ttyarg = NULL.*$gdb_prompt $" {
-		set description "step over ttyarg initialization"
-		set command "step"
-	    }
-	    -re ".*interparg = NULL.*$gdb_prompt $" {
-		set description "step over interparg initialization"
-		set command "step"
-	    }
-	    -re ".*time_at_startup = get_run_time.*$gdb_prompt $" {
-		set description "next over get_run_time and everything it calls"
-		set command "next"
-	    }
-	    -re ".*START_PROGRESS.*$gdb_prompt $" {
-		set description "next over START_PROGRESS and everything it calls"
-		set command "next"
-	    }
-	    -re ".*mac_init.*$gdb_prompt $" {
-		set description "next over mac_init and everything it calls"
-		set command "next"
-	    }
-	    -re ".*init_malloc.*$gdb_prompt $" {
-		set description "next over init_malloc and everything it calls"
-		set command "next"
-	    }
-	    -re ".*count . 0x3.*$gdb_prompt $" {
-		set description "next over conditional stack alignment code 1"
-		set command "next"
-	    }
-	    -re ".*if .i != 0.*$gdb_prompt $" {
-		set description "next over conditional stack alignment code 2"
-		set command "next"
-	    }
-	    -re ".*alloca .i - 4.*$gdb_prompt $" {
-		set description "next over conditional stack alignment alloca"
-		set command "next"
-	    }
-	    -re ".*SET_TOP_LEVEL.*$gdb_prompt $" {
-		set description "next over SET_TOP_LEVEL call"
-		set command "next"
-	    }
-	    -re ".*cmdsize = 1.*$gdb_prompt $" {
-		set description "step over cmdsize initialization"
-		set command "next"
-	    }
-	    -re ".*cmdarg = .* xmalloc.*$gdb_prompt $" {
-		set description "next over cmdarg initialization via xmalloc"
-		set command "next"
-	    }
-	    -re ".*ncmd = 0.*$gdb_prompt $" {
-		set description "next over ncmd initialization"
-		set command "next"
-	    }
-	    -re ".*dirsize = 1.*$gdb_prompt $" {
-		set description "next over dirsize initialization"
-		set command "next"
-	    }
-	    -re ".*dirarg = .* xmalloc.*$gdb_prompt $" {
-		return
-	    }
-	    -re "\[ \t\]+\{\r\n$gdb_prompt $" {
-		setup_xfail "mips-*-irix5*"
-		fail "$description ended up at odd location"
-	    }
-	    -re ".*main.c.*No such file or directory.*$gdb_prompt $" {
-		setup_xfail "rs6000-*-aix3*"
-		fail "must be able to list source lines"
-		return
-	    }
-	    -re ".*$gdb_prompt $" {
-		fail "unknown source line after $description"
-		return
-	    }
-	    default {
-		fail "unknown source line near main"
-		return
-	    }
-	}
-	send_gdb "$command\n"
-	gdb_expect {
-	    -re ".*No such file or directory.\r\n$gdb_prompt $" {
-		fail "$description (no source available)"
-	    }
-	    -re ".*A file or directory .* does not exist..\r\n$gdb_prompt $" {
-		fail "$description (no source available)"
-	    }
-	    -re ".*$gdb_prompt $" {
-		pass "$description"
-	    }
-	    timeout {
-		fail "$description (timeout)"
-	    }
-	}
-    }
-}
-
-proc test_with_self { executable } {
-    global gdb_prompt
-    global tool
-    global det_file
-    global decimal
-    global timeout
-
-    # load yourself into the debugger
-    # This can take a relatively long time, particularly for testing where
-    # the executable is being accessed over a network, or where gdb does not
-    # support partial symbols for a particular target and has to load the
-    # entire symbol table.  Set the timeout to 10 minutes, which should be
-    # adequate for most environments (it *has* timed out with 5 min on a
-    # SPARCstation SLC under moderate load, so this isn't unreasonable).
-    # After gdb is started, set the timeout to 30 seconds for the duration
-    # of this test, and then back to the original value.
-
-    set oldtimeout $timeout
-    set timeout 600
-    verbose "Timeout is now $timeout seconds" 2
-    if {[gdb_load $executable] <0} then {
-	set timeout $oldtimeout
-	verbose "Timeout is now $timeout seconds" 2
-	return -1
-    }
-    set timeout $oldtimeout
-    verbose "Timeout is now $timeout seconds" 2
-
-    # disassemble yourself
-    gdb_test "x/10i main" \
-	    "x/10i.*main.*main.$decimal.*main.$decimal.*" \
-	    "Disassemble main"
-
-    # Set a breakpoint at main
-    gdb_test "break main" \
-	    "Breakpoint.*at.* file.*, line.*" \
-	    "breakpoint in main"
-
-    # We'll need this when we send a ^C to GDB.  Need to do it before we
-    # run the program and gdb starts saving and restoring tty states.
-    # On Ultrix, we don't need it and it is really slow (because shell_escape
-    # doesn't use vfork).
-    if ![istarget "*-*-ultrix*"] then {
-	gdb_test "shell stty intr '^C'" "" \
-	    "set interrupt character in test_with_self"
-    }
-
-    # FIXME: If we put this after the run to main, the first list
-    # command doesn't print the same line as the current line where
-    # gdb is stopped.
-    gdb_test "set listsize 1" "" "set listsize to 1"
-
-    # run yourself
-    # It may take a very long time for the inferior gdb to start (lynx),
-    # so we bump it back up for the duration of this command.
-    set timeout 600
-
-    set description "run until breakpoint at main"
-    send_gdb "run -nw\n"
-    gdb_expect {
-	-re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.* at .*main.c:.*$gdb_prompt $" {
-	    pass "$description"
-	}
-	-re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.*$gdb_prompt $" {
-	    xfail "$description (line numbers scrambled?)"
-	}
-	-re "vfork: No more processes.*$gdb_prompt $" {
-	    fail "$description (out of virtual memory)"
-	    set timeout $oldtimeout
-	    verbose "Timeout is now $timeout seconds" 2
-	    return -1
-	}
-	-re ".*$gdb_prompt $" {
-	    fail "$description"
-	    set timeout $oldtimeout
-	    verbose "Timeout is now $timeout seconds" 2
-	    return -1
-	}
-	timeout {
-	    fail "$description (timeout)"
-	}
-    }
-
-    set timeout $oldtimeout
-    verbose "Timeout is now $timeout seconds" 2
-
-    # do we have a version number ?
-    send_gdb "print version\n"
-    gdb_expect {
-	-re ".\[0-9\]+ = +0x.*\[0-9.\]+.*$gdb_prompt $" {
-	    pass "printed version"
-	}
-	-re ".\[0-9\]+ = +.+ +0x.*\[0-9.\]+.*$gdb_prompt $" {
-	    pass "printed version with cast"
-	}
-	-re ".*$gdb_prompt $"	{ fail "printed version" }
-	timeout		{ fail "(timeout) printed version" }
-    }
-
-    do_steps_and_nexts
-
-    gdb_test "print \"foo\"" ".\[0-9\]+ = \"foo\"" "print a string"
-
-    # do_steps_and_nexts left us ready to execute an xmalloc call,
-    # so give that a try.
-    # If we don't actually enter the xmalloc call when we give a
-    # step command that seems like a genuine bug.  It seems to happen
-    # on most RISC processors.
-    setup_xfail "alpha-*-*" "mips-*-*"
-    set description "step into xmalloc call"
-    send_gdb "step\n"
-    gdb_expect {
-	-re "xmalloc.*size=.*at.*utils.c.*$gdb_prompt $" {
-	    pass "$description"
-	}
-	-re ".*No such file or directory.\r\n$gdb_prompt $" {
-	    pass "$description (no source available)"
-	}
-	-re "A file or directory .* does not exist..\r\n$gdb_prompt $" {
-	    pass "$description (no source available)"
-	}
-	-re ".*$gdb_prompt $" {
-	    fail "$description"
-	}
-	timeout {
-	    fail "$description (timeout)"
-	}
-    }
-
-    # start the "xgdb" process
-    send_gdb "continue\n"
-    gdb_expect {
-	-re "GNU gdb \[0-9\.\]*.*
-Copyright \[0-9\]* Free Software Foundation, Inc.*
-GDB is free software, covered by the GNU General Public License, and you are.*
-welcome to change it and/or distribute copies of it under certain conditions.*
-Type \"show copying\" to see the conditions.*
-There is absolutely no warranty for GDB.  Type \"show warranty\" for details.*
-This GDB was configured as .*$gdb_prompt $"\
-	    { pass "xgdb is at prompt" }
-	-re "GDB is free software and you are welcome to distribute copies of it.*
- under certain conditions; type \"show copying\" to see the conditions..*
-There is absolutely no warranty for GDB; type \"show warranty\" for details..*
-GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$gdb_prompt $"\
-	    { pass "xgdb is at prompt (obsolescent gdb)" }
-	-re ".*$gdb_prompt $"       { fail "xgdb is at prompt" }
-	timeout	            { fail "(timeout) xgdb is at prompt" }
-    }
-    
-    # set xgdb prompt so we can tell which is which
-    send_gdb "set prompt (xgdb) \n"
-    gdb_expect {
-	-re "\[(\]xgdb\[)\].*\[(\]xgdb\[)\] $"	{ pass "Set xgdb prompt" }
-	-re ".*$gdb_prompt $"		{ fail "Set xgdb prompt" }
-	default				{ fail "(timeout) Set xgdb prompt" }
-    }
-    
-    # kill the xgdb process
-    set description "send ^C to child process"
-    send_gdb "\003"
-    gdb_expect {
-	-re "Program received signal SIGINT.*$gdb_prompt $" {
-	    pass "$description"
-	}
-	-re ".*$gdb_prompt $" {
-	    fail "$description"
-	}
-	timeout {
-	    fail "$description (timeout)"
-	}
-    }
-    
-    set description "send SIGINT signal to child process"
-    send_gdb "signal SIGINT\n"
-    gdb_expect {
-	-re "Continuing with signal SIGINT.*$gdb_prompt $" {
-	    pass "$description"
-	}
-	-re ".*$gdb_prompt $" {
-	    fail "$description"
-	}
-	timeout {
-	    fail "$description (timeout)"
-	}
-    }
-    
-    # get a stack trace
-    #
-    # This fails on some linux systems for unknown reasons.  On the
-    # systems where it fails, sometimes it works fine when run manually.
-    # The testsuite failures may not be limited to just aout systems.
-    setup_xfail "i*86-pc-linuxaout-gnu" "hppa*-*-hpux*"
-    set description "backtrace through signal handler"
-    send_gdb "backtrace\n"
-    gdb_expect {
-	-re "#0.*read.*in main \\(.*\\) at .*main\\.c.*$gdb_prompt $" {
-	    pass "$description"
-	}
-	-re ".*$gdb_prompt $" {
-	    # On the alpha, we hit the infamous problem about gdb
-	    # being unable to get the frame pointer (mentioned in
-	    # gdb/README).  As it is intermittent, there is no way to
-	    # XFAIL it which will give us an XPASS if the problem goes
-	    # away.
-	    setup_xfail "alpha*-*-osf*"
-	    fail "$description"
-	}
-	timeout {
-	    fail "$description (timeout)"
-	}
-    }
-
-
-    # Set the timeout back to the value it had when we were called.
-    set timeout $oldtimeout
-    verbose "Timeout is now $timeout seconds" 2
-
-    # Restart gdb in case next test expects it to be started already.
-    return 0
-}
-
-# Find a pathname to a file that we would execute if the shell was asked
-# to run $arg using the current PATH.
-
-proc find_gdb { arg } {
-
-    # If the arg directly specifies an existing executable file, then
-    # simply use it.
-
-    if [file executable $arg] then {
-	return $arg
-    }
-
-    set result [which $arg]
-    if [string match "/" [ string range $result 0 0 ]] then {
-	return $result
-    }
-
-    # If everything fails, just return the unqualified pathname as default
-    # and hope for best.
-
-    return $arg
-}
-
-# Run the test with self.
-# Copy the file executable file in case this OS doesn't like to edit its own
-# text space.
-
-set GDB_FULLPATH [find_gdb $GDB]
-
-# Remove any old copy lying around.
-remote_file host delete x$tool
-
-gdb_start
-set file [remote_download host $GDB_FULLPATH x$tool]
-set result [test_with_self $file];
-gdb_exit;
-catch "remote_file host delete $file";
-
-if {$result <0} then {
-    warning "Couldn't test self"
-    return -1
-}
diff --git a/gdb/testsuite/gdb.base/pointers2.c b/gdb/testsuite/gdb.base/pointers2.c
deleted file mode 100644
index 6c30621..0000000
--- a/gdb/testsuite/gdb.base/pointers2.c
+++ /dev/null
@@ -1,51 +0,0 @@
-void marker1 ()
-{
-    
-}
-
-
-int main()
-{
-    char C, *pC, **ppC, ***pppC, ****ppppC, *****pppppC, ******ppppppC;
-    unsigned char UC, *pUC;
-    short S, *pS;
-    unsigned short US, *pUS;
-    int I, *pI;
-    unsigned int UI, *pUI;
-    long L, *pL;
-    unsigned long UL, *pUL;
-    float F, *pF;
-    double D, *pD;
-    C = 'A';
-    UC = 21;
-    S = -14;
-    US = 7;
-    I = 102;
-    UI = 1002;
-    L = -234;
-    UL = 234;
-    F = 1.25E10;
-    D = -1.375E-123;
-    pC = &C;
-    ppC = &pC;
-    pppC = &ppC;
-    ppppC = &pppC;
-    pppppC = &ppppC;
-    ppppppC = &pppppC;
-    pUC = &UC;
-    pS = &S;
-    pUS = &US;
-    pI = &I;
-    pUI = &UI;
-    pL = &L;
-    pUL = &UL;
-    pF = &F;
-    pD = &D;
-    
-    #ifdef usestubs
-       set_debug_traps();
-       breakpoint();
-    #endif
-    marker1();
-    return 0;
-}
diff --git a/gdb/testsuite/gdb.base/pointers2.exp b/gdb/testsuite/gdb.base/pointers2.exp
deleted file mode 100644
index e44e110..0000000
--- a/gdb/testsuite/gdb.base/pointers2.exp
+++ /dev/null
@@ -1,288 +0,0 @@
-#   Copyright (C) 1997, 1998
-#   Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-
-# This file was written by Elena Zannoni. (ezannoni@cygnus.com)
-
-
-# This file is part of the gdb testsuite
-#
-# tests for pointers 
-# with elementary type variables and pointers.
-# 
-
-
-if $tracelevel then {
-        strace $tracelevel
-        }
-
-#
-# test running programs
-#
-set prms_id 0
-set bug_id 0
-
-set testfile "pointers2"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
-    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-}
-
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-
-#
-# set it up at a breakpoint so we can play with the variable values
-#
-if ![runto_main] then {
-    perror "couldn't run to breakpoint"
-    continue
-}
-
-send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
-
-    send_gdb "cont\n"
-    gdb_expect {
-        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
-            send_gdb "up\n"
-            gdb_expect {
-                -re ".*$gdb_prompt $" {}
-                timeout { fail "up from marker1" }
-            }
-        }
-        -re "$gdb_prompt $" { fail "continue to marker1"  }
-        timeout { fail "(timeout) continue to marker1"  }
-    }
-
-
-send_gdb "print *pUC\n"
-gdb_expect {
-    -re ".\[0-9\]* = 21 \'.025\'.*$gdb_prompt $" {
-        pass "print value of *pUC"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pUC" }
-    timeout           { fail "(timeout) print value of *pUC" }
-  }
-
-
-send_gdb "ptype pUC\n"
-gdb_expect {
-    -re "type = unsigned char \\*.*$gdb_prompt $"  { pass "ptype pUC" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pUC" }
-    timeout             { fail "(timeout) ptype pUC" }
-}
-
-send_gdb "print *pS\n"
-gdb_expect {
-    -re ".\[0-9\]* = -14.*$gdb_prompt $" {
-        pass "print value of *pS"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pS" }
-    timeout           { fail "(timeout) print value of *pS" }
-  }
-
-
-send_gdb "ptype pS\n"
-gdb_expect {
-    -re "type = short \\*.*$gdb_prompt $"  { pass "ptype pS" }
-    -re "type = short int \\*.*$gdb_prompt $"  { pass "ptype pS" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pS" }
-    timeout             { fail "(timeout) ptype pS" }
-}
-
-send_gdb "print *pUS\n"
-gdb_expect {
-    -re ".\[0-9\]* = 7.*$gdb_prompt $" {
-        pass "print value of *pUS"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pUS" }
-    timeout           { fail "(timeout) print value of *pUS" }
-  }
-
-
-send_gdb "ptype pUS\n"
-gdb_expect {
-    -re "type = unsigned short \\*.*$gdb_prompt $"  { pass "ptype pUS" }
-    -re "type = short unsigned int \\*.*$gdb_prompt $"  { pass "ptype pUS" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pUS" }
-    timeout             { fail "(timeout) ptype pUS" }
-}
-
-send_gdb "print *pI\n"
-gdb_expect {
-    -re ".\[0-9\]* = 102.*$gdb_prompt $" {
-        pass "print value of *pI"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pI" }
-    timeout           { fail "(timeout) print value of *pI" }
-  }
-
-
-send_gdb "ptype pI\n"
-gdb_expect {
-    -re "type = int \\*.*$gdb_prompt $"  { pass "ptype pI" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pI" }
-    timeout             { fail "(timeout) ptype pI" }
-}
-
-send_gdb "print *pUI\n"
-gdb_expect {
-    -re ".\[0-9\]* = 1002.*$gdb_prompt $" {
-        pass "print value of *pUI"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pUI" }
-    timeout           { fail "(timeout) print value of *pUI" }
-  }
-
-
-send_gdb "ptype pUI\n"
-gdb_expect {
-    -re "type = unsigned int \\*.*$gdb_prompt $"  { pass "ptype pUI" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pUI" }
-    timeout             { fail "(timeout) ptype pUI" }
-}
-
-send_gdb "print *pL\n"
-gdb_expect {
-    -re ".\[0-9\]* = -234.*$gdb_prompt $" {
-        pass "print value of *pL"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pL" }
-    timeout           { fail "(timeout) print value of *pL" }
-  }
-
-
-send_gdb "ptype pL\n"
-gdb_expect {
-    -re "type = long \\*.*$gdb_prompt $"  { pass "ptype pL" }
-    -re "type = long int \\*.*$gdb_prompt $"  { pass "ptype pL" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pL" }
-    timeout             { fail "(timeout) ptype pL" }
-}
-
-send_gdb "print *pUL\n"
-gdb_expect {
-    -re ".\[0-9\]* = 234.*$gdb_prompt $" {
-        pass "print value of *pUL"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pUL" }
-    timeout           { fail "(timeout) print value of *pUL" }
-  }
-
-
-send_gdb "ptype pUL\n"
-gdb_expect {
-    -re "type = unsigned long \\*.*$gdb_prompt $"  { pass "ptype pUL" }
-    -re "type = long unsigned int \\*.*$gdb_prompt $"  { pass "ptype pUL" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pUL" }
-    timeout             { fail "(timeout) ptype pUL" }
-}
-
-send_gdb "print *pF\n"
-gdb_expect {
-    -re ".\[0-9\]* = 1.2\[0-9\]*e\\+10.*$gdb_prompt $" {
-        pass "print value of *pF"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pF" }
-    timeout           { fail "(timeout) print value of *pF" }
-  }
-
-
-send_gdb "ptype pF\n"
-gdb_expect {
-    -re "type = float \\*.*$gdb_prompt $"  { pass "ptype pF" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pF" }
-    timeout             { fail "(timeout) ptype pF" }
-}
-
-send_gdb "print *pD\n"
-gdb_expect {
-    -re ".\[0-9\]* = -1.375e-123.*$gdb_prompt $" {
-        pass "print value of *pD"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of *pD" }
-    timeout           { fail "(timeout) print value of *pD" }
-  }
-
-
-send_gdb "ptype pD\n"
-gdb_expect {
-    -re "type = double \\*.*$gdb_prompt $"  { pass "ptype pD" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pD" }
-    timeout             { fail "(timeout) ptype pD" }
-}
-
-send_gdb "print ******ppppppC\n"
-gdb_expect {
-    -re ".\[0-9\]* = 65 \'A\'.*$gdb_prompt $" {
-        pass "print value of ******ppppppC"
-      }
-    -re ".*$gdb_prompt $" { fail "print value of ******ppppppC" }
-    timeout           { fail "(timeout) print value of ******ppppppC" }
-  }
-
-
-send_gdb "ptype pC\n"
-gdb_expect {
-    -re "type = char \\*.*$gdb_prompt $"  { pass "ptype pC" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pC" }
-    timeout             { fail "(timeout) ptype pC" }
-}
-
-send_gdb "ptype ppC\n"
-gdb_expect {
-    -re "type = char \\*\\*.*$gdb_prompt $"  { pass "ptype ppC" }
-    -re ".*$gdb_prompt $"   {  fail "ptype ppC" }
-    timeout             { fail "(timeout) ptype ppC" }
-}
-
-send_gdb "ptype pppC\n"
-gdb_expect {
-    -re "type = char \\*\\*\\*.*$gdb_prompt $"  { pass "ptype  pppC" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pppC" }
-    timeout             { fail "(timeout) ptype pppC" }
-}
-
-send_gdb "ptype ppppC\n"
-gdb_expect {
-    -re "type = char \\*\\*\\*\\*.*$gdb_prompt $"  { pass "ptype ppppC" }
-    -re ".*$gdb_prompt $"   {  fail "ptype ppppC" }
-    timeout             { fail "(timeout) ptype ppppC" }
-}
-
-send_gdb "ptype pppppC\n"
-gdb_expect {
-    -re "type = char \\*\\*\\*\\*\\*.*$gdb_prompt $"  { pass "ptype pppppC" }
-    -re ".*$gdb_prompt $"   {  fail "ptype pppppC" }
-    timeout             { fail "(timeout) ptype pppppC" }
-}
-
-send_gdb "ptype ppppppC\n"
-gdb_expect {
-    -re "type = char \\*\\*\\*\\*\\*\\*.*$gdb_prompt $"  { pass "ptype ppppppC" }
-    -re ".*$gdb_prompt $"   {  fail "ptype ppppppC" }
-    timeout             { fail "(timeout) ptype ppppppC" }
-}
-