From: Matthias Schiffer Date: Mon, 26 Sep 2022 08:31:08 +0000 (+0200) Subject: ARM: mx7: psci: fix suspend/resume e10133 workaround X-Git-Tag: v2023.07~261^2~41 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=975f4117d5592312acd14d715fd7498361a77b57;p=platform%2Fkernel%2Fu-boot.git ARM: mx7: psci: fix suspend/resume e10133 workaround The e10133 workaround was broken in two places: - The code intended to temporarily mask all interrupts in GPC_IMRx_CORE0. While the old register values were saved, the actual masking was missing. - imx_udelay() expects the system counter to run at its base frequency, but the system counter is switched to a lower frequency earlier in psci_system_suspend(), leading to a much longer delay than intended. Replace the call with an equivalent loop (linux-imx 5.15 does the same) This fixes the SoC hanging forever when there was already a wakeup IRQ pending while suspending. Fixes: 57b620255e ("imx: mx7: add system suspend/resume support") Signed-off-by: Matthias Schiffer --- diff --git a/arch/arm/mach-imx/mx7/psci-mx7.c b/arch/arm/mach-imx/mx7/psci-mx7.c index f32945e..699a256 100644 --- a/arch/arm/mach-imx/mx7/psci-mx7.c +++ b/arch/arm/mach-imx/mx7/psci-mx7.c @@ -643,8 +643,10 @@ __secure void psci_system_suspend(u32 __always_unused function_id, /* disable GIC distributor */ writel(0, GIC400_ARB_BASE_ADDR + GIC_DIST_OFFSET); - for (i = 0; i < 4; i++) + for (i = 0; i < 4; i++) { gpc_mask[i] = readl(GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); + writel(~0, GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); + } /* * enable the RBC bypass counter here @@ -668,7 +670,7 @@ __secure void psci_system_suspend(u32 __always_unused function_id, writel(gpc_mask[i], GPC_IPS_BASE_ADDR + GPC_IMR1_CORE0 + i * 4); /* - * now delay for a short while (3usec) + * now delay for a short while (~3usec) * ARM is at 1GHz at this point * so a short loop should be enough. * this delay is required to ensure that @@ -677,7 +679,8 @@ __secure void psci_system_suspend(u32 __always_unused function_id, * or in case an interrupt arrives just * as ARM is about to assert DSM_request. */ - imx_udelay(3); + for (i = 0; i < 2000; i++) + asm volatile(""); /* save resume entry and sp in CPU0 GPR registers */ asm volatile("mov %0, sp" : "=r" (val));