From: Janusz Dziedzic Date: Thu, 30 Jan 2014 08:52:20 +0000 (+0100) Subject: cfg80211: regulatory introduce maximum bandwidth calculation X-Git-Tag: accepted/tizen/common/20141203.182822~316^2~18^2^2~47^2~50 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9752482083066af7ac18a5ca376ff35d72418b29;p=platform%2Fkernel%2Flinux-arm64.git cfg80211: regulatory introduce maximum bandwidth calculation In case we will get regulatory request with rule where max_bandwidth_khz is set to 0 handle this case as a special one. If max_bandwidth_khz == 0 we should calculate maximum available bandwidth base on all frequency contiguous rules. In case we need auto calculation we just have to set: country PL: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ AUTO), (N/A, 20) (5250 - 5330 @ AUTO), (N/A, 20), DFS (5490 - 5710 @ 80), (N/A, 27), DFS This mean we will calculate maximum bw for rules where AUTO (N/A) were set, 160MHz (5330 - 5170) in example above. So we will get: (5170 - 5250 @ 160), (N/A, 20) (5250 - 5330 @ 160), (N/A, 20), DFS In other case: country FR: DFS-ETSI (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ AUTO), (N/A, 20) (5250 - 5330 @ 80), (N/A, 20), DFS (5490 - 5710 @ 80), (N/A, 27), DFS We will get 80MHz (5250 - 5170): (5170 - 5250 @ 80), (N/A, 20) (5250 - 5330 @ 80), (N/A, 20), DFS Base on this calculations we will set correct channel bandwidth flags (eg. IEEE80211_CHAN_NO_80MHZ). We don't need any changes in CRDA or internal regulatory. Signed-off-by: Janusz Dziedzic [extend nl80211 description a bit, fix typo] Signed-off-by: Johannes Berg --- diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 474ce32..a12e6ca 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2437,7 +2437,10 @@ enum nl80211_reg_type { * in KHz. This is not a center a frequency but an actual regulatory * band edge. * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this - * frequency range, in KHz. + * frequency range, in KHz. If not present or 0, maximum available + * bandwidth should be calculated base on contiguous rules and wider + * channels will be allowed to cross multiple contiguous/overlapping + * frequency ranges. * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain * for a given frequency range. The value is in mBi (100 * dBi). * If you don't have one then don't send this. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index be091dd..ebea1a1 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4626,8 +4626,6 @@ static int parse_reg_rule(struct nlattr *tb[], return -EINVAL; if (!tb[NL80211_ATTR_FREQ_RANGE_END]) return -EINVAL; - if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]) - return -EINVAL; if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]) return -EINVAL; @@ -4637,8 +4635,9 @@ static int parse_reg_rule(struct nlattr *tb[], nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]); freq_range->end_freq_khz = nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]); - freq_range->max_bandwidth_khz = - nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]); + if (tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]) + freq_range->max_bandwidth_khz = + nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]); power_rule->max_eirp = nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]); @@ -5108,6 +5107,7 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) const struct ieee80211_reg_rule *reg_rule; const struct ieee80211_freq_range *freq_range; const struct ieee80211_power_rule *power_rule; + unsigned int max_bandwidth_khz; reg_rule = ®dom->reg_rules[i]; freq_range = ®_rule->freq_range; @@ -5117,6 +5117,11 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) if (!nl_reg_rule) goto nla_put_failure_rcu; + max_bandwidth_khz = freq_range->max_bandwidth_khz; + if (!max_bandwidth_khz) + max_bandwidth_khz = reg_get_max_bandwidth(regdom, + reg_rule); + if (nla_put_u32(msg, NL80211_ATTR_REG_RULE_FLAGS, reg_rule->flags) || nla_put_u32(msg, NL80211_ATTR_FREQ_RANGE_START, @@ -5124,7 +5129,7 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) nla_put_u32(msg, NL80211_ATTR_FREQ_RANGE_END, freq_range->end_freq_khz) || nla_put_u32(msg, NL80211_ATTR_FREQ_RANGE_MAX_BW, - freq_range->max_bandwidth_khz) || + max_bandwidth_khz) || nla_put_u32(msg, NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, power_rule->max_antenna_gain) || nla_put_u32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP, diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 27807bf..27c5253 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -538,6 +538,61 @@ static const struct ieee80211_regdomain *reg_get_regdomain(struct wiphy *wiphy) return get_cfg80211_regdom(); } +unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd, + const struct ieee80211_reg_rule *rule) +{ + const struct ieee80211_freq_range *freq_range = &rule->freq_range; + const struct ieee80211_freq_range *freq_range_tmp; + const struct ieee80211_reg_rule *tmp; + u32 start_freq, end_freq, idx, no; + + for (idx = 0; idx < rd->n_reg_rules; idx++) + if (rule == &rd->reg_rules[idx]) + break; + + if (idx == rd->n_reg_rules) + return 0; + + /* get start_freq */ + no = idx; + + while (no) { + tmp = &rd->reg_rules[--no]; + freq_range_tmp = &tmp->freq_range; + + if (freq_range_tmp->end_freq_khz < freq_range->start_freq_khz) + break; + + if (freq_range_tmp->max_bandwidth_khz) + break; + + freq_range = freq_range_tmp; + } + + start_freq = freq_range->start_freq_khz; + + /* get end_freq */ + freq_range = &rule->freq_range; + no = idx; + + while (no < rd->n_reg_rules - 1) { + tmp = &rd->reg_rules[++no]; + freq_range_tmp = &tmp->freq_range; + + if (freq_range_tmp->start_freq_khz > freq_range->end_freq_khz) + break; + + if (freq_range_tmp->max_bandwidth_khz) + break; + + freq_range = freq_range_tmp; + } + + end_freq = freq_range->end_freq_khz; + + return end_freq - start_freq; +} + /* Sanity check on a regulatory rule */ static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) { @@ -646,7 +701,9 @@ reg_intersect_dfs_region(const enum nl80211_dfs_regions dfs_region1, * Helper for regdom_intersect(), this does the real * mathematical intersection fun */ -static int reg_rules_intersect(const struct ieee80211_reg_rule *rule1, +static int reg_rules_intersect(const struct ieee80211_regdomain *rd1, + const struct ieee80211_regdomain *rd2, + const struct ieee80211_reg_rule *rule1, const struct ieee80211_reg_rule *rule2, struct ieee80211_reg_rule *intersected_rule) { @@ -654,7 +711,7 @@ static int reg_rules_intersect(const struct ieee80211_reg_rule *rule1, struct ieee80211_freq_range *freq_range; const struct ieee80211_power_rule *power_rule1, *power_rule2; struct ieee80211_power_rule *power_rule; - u32 freq_diff; + u32 freq_diff, max_bandwidth1, max_bandwidth2; freq_range1 = &rule1->freq_range; freq_range2 = &rule2->freq_range; @@ -668,8 +725,24 @@ static int reg_rules_intersect(const struct ieee80211_reg_rule *rule1, freq_range2->start_freq_khz); freq_range->end_freq_khz = min(freq_range1->end_freq_khz, freq_range2->end_freq_khz); - freq_range->max_bandwidth_khz = min(freq_range1->max_bandwidth_khz, - freq_range2->max_bandwidth_khz); + + max_bandwidth1 = freq_range1->max_bandwidth_khz; + max_bandwidth2 = freq_range2->max_bandwidth_khz; + + /* + * In case max_bandwidth1 == 0 and max_bandwith2 == 0 set + * output bandwidth as 0 (auto calculation). Next we will + * calculate this correctly in handle_channel function. + * In other case calculate output bandwidth here. + */ + if (max_bandwidth1 || max_bandwidth2) { + if (!max_bandwidth1) + max_bandwidth1 = reg_get_max_bandwidth(rd1, rule1); + if (!max_bandwidth2) + max_bandwidth2 = reg_get_max_bandwidth(rd2, rule2); + } + + freq_range->max_bandwidth_khz = min(max_bandwidth1, max_bandwidth2); freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; if (freq_range->max_bandwidth_khz > freq_diff) @@ -729,7 +802,8 @@ regdom_intersect(const struct ieee80211_regdomain *rd1, rule1 = &rd1->reg_rules[x]; for (y = 0; y < rd2->n_reg_rules; y++) { rule2 = &rd2->reg_rules[y]; - if (!reg_rules_intersect(rule1, rule2, &dummy_rule)) + if (!reg_rules_intersect(rd1, rd2, rule1, rule2, + &dummy_rule)) num_rules++; } } @@ -754,7 +828,8 @@ regdom_intersect(const struct ieee80211_regdomain *rd1, * a memcpy() */ intersected_rule = &rd->reg_rules[rule_idx]; - r = reg_rules_intersect(rule1, rule2, intersected_rule); + r = reg_rules_intersect(rd1, rd2, rule1, rule2, + intersected_rule); /* * No need to memset here the intersected rule here as * we're not using the stack anymore @@ -909,6 +984,8 @@ static void handle_channel(struct wiphy *wiphy, const struct ieee80211_freq_range *freq_range = NULL; struct wiphy *request_wiphy = NULL; struct regulatory_request *lr = get_last_request(); + const struct ieee80211_regdomain *regd; + u32 max_bandwidth_khz; request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); @@ -950,11 +1027,18 @@ static void handle_channel(struct wiphy *wiphy, power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; - if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) + max_bandwidth_khz = freq_range->max_bandwidth_khz; + /* Check if auto calculation requested */ + if (!max_bandwidth_khz) { + regd = reg_get_regdomain(wiphy); + max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); + } + + if (max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; - if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; - if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + if (max_bandwidth_khz < MHZ_TO_KHZ(160)) bw_flags |= IEEE80211_CHAN_NO_160MHZ; if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && @@ -1340,6 +1424,7 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; + u32 max_bandwidth_khz; reg_rule = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), regd); @@ -1357,11 +1442,16 @@ static void handle_channel_custom(struct wiphy *wiphy, power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; - if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) + max_bandwidth_khz = freq_range->max_bandwidth_khz; + /* Check if auto calculation requested */ + if (!max_bandwidth_khz) + max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); + + if (max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; - if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; - if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + if (max_bandwidth_khz < MHZ_TO_KHZ(160)) bw_flags |= IEEE80211_CHAN_NO_160MHZ; chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; @@ -2155,6 +2245,7 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd) const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; const struct ieee80211_power_rule *power_rule = NULL; + char bw[32]; pr_info(" (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)\n"); @@ -2163,22 +2254,29 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd) freq_range = ®_rule->freq_range; power_rule = ®_rule->power_rule; + if (!freq_range->max_bandwidth_khz) + snprintf(bw, 32, "%d KHz, AUTO", + reg_get_max_bandwidth(rd, reg_rule)); + else + snprintf(bw, 32, "%d KHz", + freq_range->max_bandwidth_khz); + /* * There may not be documentation for max antenna gain * in certain regions */ if (power_rule->max_antenna_gain) - pr_info(" (%d KHz - %d KHz @ %d KHz), (%d mBi, %d mBm)\n", + pr_info(" (%d KHz - %d KHz @ %s), (%d mBi, %d mBm)\n", freq_range->start_freq_khz, freq_range->end_freq_khz, - freq_range->max_bandwidth_khz, + bw, power_rule->max_antenna_gain, power_rule->max_eirp); else - pr_info(" (%d KHz - %d KHz @ %d KHz), (N/A, %d mBm)\n", + pr_info(" (%d KHz - %d KHz @ %s), (N/A, %d mBm)\n", freq_range->start_freq_khz, freq_range->end_freq_khz, - freq_range->max_bandwidth_khz, + bw, power_rule->max_eirp); } } diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 02bd8f4..1852461 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -34,6 +34,8 @@ int __init regulatory_init(void); void regulatory_exit(void); int set_regdom(const struct ieee80211_regdomain *rd); +unsigned int reg_get_max_bandwidth(const struct ieee80211_regdomain *rd, + const struct ieee80211_reg_rule *rule); bool reg_last_request_cell_base(void);