From: Vladimir Oltean Date: Mon, 1 Mar 2021 11:18:17 +0000 (+0200) Subject: net: enetc: remove bogus write to SIRXIDR from enetc_setup_rxbdr X-Git-Tag: v5.15~1571^2~68^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=96a5223b918c8b79270fc0fec235a7ebad459098;p=platform%2Fkernel%2Flinux-starfive.git net: enetc: remove bogus write to SIRXIDR from enetc_setup_rxbdr The Station Interface Receive Interrupt Detect Register (SIRXIDR) contains a 16-bit wide mask of 'interrupt detected' events for each ring associated with a port. Bit i is write-1-to-clean for RX ring i. I have no explanation whatsoever how this line of code came to be inserted in the blamed commit. I checked the downstream versions of that patch and none of them have it. The somewhat comical aspect of it is that we're writing a binary number to the SIRXIDR register, which is derived from enetc_bd_unused(rx_ring). Since the RX rings have 512 buffer descriptors, we end up writing 511 to this register, which is 0x1ff, so we are effectively clearing the 'interrupt detected' event for rings 0-8. This register is not what is used for interrupt handling though - it only provides a summary for the entire SI. The hardware provides one separate Interrupt Detect Register per RX ring, which auto-clears upon read. So there doesn't seem to be any adverse effect caused by this bogus write. There is, however, one reason why this should be handled as a bugfix: next_to_clean _should_ be committed to hardware, just not to that register, and this was obscuring the fact that it wasn't. This is fixed in the next patch, and removing the bogus line now allows the fix patch to be backported beyond that point. Fixes: fd5736bf9f23 ("enetc: Workaround for MDIO register access issue") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 8ddf0cdc37a5..abb29ee81463 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1212,7 +1212,6 @@ static void enetc_setup_rxbdr(struct enetc_hw *hw, struct enetc_bdr *rx_ring) rx_ring->idr = hw->reg + ENETC_SIRXIDR; enetc_refill_rx_ring(rx_ring, enetc_bd_unused(rx_ring)); - enetc_wr(hw, ENETC_SIRXIDR, rx_ring->next_to_use); /* enable ring */ enetc_rxbdr_wr(hw, idx, ENETC_RBMR, rbmr);