From: Tim Harvey <tharvey@gateworks.com>
Date: Fri, 11 Jun 2021 19:46:25 +0000 (-0700)
Subject: imx: ventana: add DP83867 PHY LED configuration
X-Git-Tag: v2021.10~100^2~41
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=9634c748b14444f6b274521fb2da30f28d310997;p=platform%2Fkernel%2Fu-boot.git

imx: ventana: add DP83867 PHY LED configuration

Add DP83867 PHY LED configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 4a6b1dc..860342d 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -96,6 +96,12 @@ int board_phy_config(struct phy_device *phydev)
 
 	/* TI DP83867 */
 	else if (phydev->phy_id == 0x2000a231) {
+		/* LED configuration */
+		val = 0;
+		val |= 0x5 << 4; /* LED1(Amber;Speed)   : 1000BT link */
+		val |= 0xb << 8; /* LED2(Green;Link/Act): blink for TX/RX act */
+		phy_write(phydev, MDIO_DEVAD_NONE, 24, val);
+
 		/* configure register 0x170 for ref CLKOUT */
 		phy_write(phydev, MDIO_DEVAD_NONE, 13, 0x001f);
 		phy_write(phydev, MDIO_DEVAD_NONE, 14, 0x0170);