From: Marek Szyprowski Date: Wed, 15 Jun 2016 08:08:27 +0000 (+0200) Subject: TPL: TM2: set MAX77843 MUIC to USB path before entering download mode X-Git-Tag: accepted/tizen/unified/20201110.125028~310 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=94224afa70f806aa1bc7ade661edb018901be55d;p=platform%2Fkernel%2Fu-boot.git TPL: TM2: set MAX77843 MUIC to USB path before entering download mode Use simple soft i2c gpio bit-bang based controller to enable MUIC register write. Signed-off-by: Marek Szyprowski Change-Id: I4087fe304d49bd4b88657e6bb4f0bd438e92d6d3 --- diff --git a/arch/arm/include/asm/arch-exynos5433/gpio.h b/arch/arm/include/asm/arch-exynos5433/gpio.h deleted file mode 120000 index a5e2c3d..0000000 --- a/arch/arm/include/asm/arch-exynos5433/gpio.h +++ /dev/null @@ -1 +0,0 @@ -../../../mach-exynos/include/mach/gpio.h \ No newline at end of file diff --git a/arch/arm/include/asm/arch-exynos5433/gpio.h b/arch/arm/include/asm/arch-exynos5433/gpio.h new file mode 100644 index 0000000..85624c9 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos5433/gpio.h @@ -0,0 +1,182 @@ +/* + * (C) Copyright 2016 Samsung Electronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H + +#ifndef __ASSEMBLY__ + +#include + +/* hsi2c_8 */ +/* Pins gpb0-1 gpb0-0 */ + +#define GPIO_GPB0_BASE 0x14CC0020 +#define GPIO_I2C_SDA_PIN 0 +#define GPIO_I2C_SCL_PIN 1 + +#define GPB0_CON 0x00 +#define GPB0_DAT 0x04 +#define GPB0_PUD 0x08 +#define GPB0_DRV 0x0C +#define GPB0_CONPDN 0x10 +#define GPB0_PUDPDN 0x14 + +#define CON_MASK(val) (0xf << ((val) << 2)) +#define CON_SFR(gpio, cfg) ((cfg) << ((gpio) << 2)) + +#define DAT_MASK(gpio) (0x1 << (gpio)) +#define DAT_SET(gpio) (0x1 << (gpio)) + +#define PULL_MASK(gpio) (0x3 << ((gpio) << 1)) +#define PULL_MODE(gpio, pull) ((pull) << ((gpio) << 1)) + +#define DRV_MASK(gpio) (0x3 << ((gpio) << 1)) +#define DRV_SET(gpio, mode) ((mode) << ((gpio) << 1)) + +/* Pin configurations */ +#define S5P_GPIO_INPUT 0x0 +#define S5P_GPIO_OUTPUT 0x1 +#define S5P_GPIO_IRQ 0xf +#define S5P_GPIO_FUNC(x) (x) + +/* Pull mode */ +#define S5P_GPIO_PULL_NONE 0x0 +#define S5P_GPIO_PULL_DOWN 0x1 +#define S5P_GPIO_PULL_UP 0x3 + +/* Drive Strength level */ +#define S5P_GPIO_DRV_1X 0x0 +#define S5P_GPIO_DRV_3X 0x1 +#define S5P_GPIO_DRV_2X 0x2 +#define S5P_GPIO_DRV_4X 0x3 +#define S5P_GPIO_DRV_FAST 0x0 +#define S5P_GPIO_DRV_SLOW 0x1 + + +static inline int gpio_request(unsigned gpio, const char *label) +{ + debug("%s: GPIO: %d -> %s\n", __func__, gpio, label); + return 0; +} + +static inline int gpio_free(unsigned gpio) +{ + debug("%s: GPIO: %d\n", __func__, gpio); + return 0; +} + +static inline void gpio_set_pin_value(void *addr, unsigned gpio, int en) +{ + unsigned int value; + + value = readl(addr); + value &= ~DAT_MASK(gpio); + if (en) + value |= DAT_SET(gpio); + writel(value, addr); +} + +static inline void gpio_cfg_pin(void *addr, unsigned gpio, int cfg) +{ + unsigned int value; + + value = readl(addr); + value &= ~CON_MASK(gpio); + value |= CON_SFR(gpio, cfg); + writel(value, addr); + +} + +static inline int gpio_direction_input(unsigned gpio) +{ + void *base = (void*) GPIO_GPB0_BASE; + + debug("%s: GPIO: %d\n", __func__, gpio); + + gpio_cfg_pin(base + GPB0_CON, gpio, S5P_GPIO_INPUT); + + return 0; +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + void *base = (void*) GPIO_GPB0_BASE; + + debug("%s: GPIO: %d VAL: %d\n", __func__, gpio, value); + + gpio_set_pin_value(base + GPB0_DAT, gpio, value); + gpio_cfg_pin(base + GPB0_CON, gpio, S5P_GPIO_OUTPUT); + + return 0; +} + +static inline int gpio_get_value(unsigned gpio) +{ + void *base = (void*) GPIO_GPB0_BASE; + unsigned int value; + + debug("%s: GPIO: %d\n", __func__, gpio); + + value = readl(base + GPB0_DAT); + return !!(value & DAT_MASK(gpio)); +} + +static inline int gpio_set_value(unsigned gpio, int value) +{ + void *base = (void*) GPIO_GPB0_BASE; + + debug("%s: GPIO: %d VAL: %d\n", __func__, gpio, value); + + gpio_set_pin_value(base + GPB0_DAT, gpio, value); + + return 0; +} + +static inline void gpio_set_pull(int gpio, int mode) +{ + void *base = (void*) GPIO_GPB0_BASE; + unsigned int value; + + value = readl(base + GPB0_PUD); + value &= ~PULL_MASK(gpio); + + switch (mode) { + case S5P_GPIO_PULL_DOWN: + case S5P_GPIO_PULL_UP: + value |= PULL_MODE(gpio, mode); + break; + default: + break; + } + + writel(value, base + GPB0_PUD); +} + +static inline void gpio_set_drv(int gpio, int mode) +{ + void *base = (void*) GPIO_GPB0_BASE; + unsigned int value; + + value = readl(base + GPB0_DRV); + value &= ~DRV_MASK(gpio); + + switch (mode) { + case S5P_GPIO_DRV_1X: + case S5P_GPIO_DRV_2X: + case S5P_GPIO_DRV_3X: + case S5P_GPIO_DRV_4X: + value |= DRV_SET(gpio, mode); + break; + default: + return; + } + + writel(value, base + GPB0_DRV); +} + +#endif +#endif diff --git a/board/samsung/tm2/tm2.c b/board/samsung/tm2/tm2.c index cd63f88..757dc5d 100644 --- a/board/samsung/tm2/tm2.c +++ b/board/samsung/tm2/tm2.c @@ -15,6 +15,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -104,6 +105,23 @@ int board_mmc_init(bd_t *bis) } #endif +#ifdef CONFIG_SYS_I2C_INIT_BOARD +void i2c_init_board(void) +{ + /* Soft I2C - hsi2c_8 */ + + gpio_request(GPIO_I2C_SDA_PIN, "hsi2c_8_data"); + gpio_request(GPIO_I2C_SCL_PIN, "hsi2c_8_clk"); + gpio_direction_output(GPIO_I2C_SDA_PIN, 1); + gpio_direction_output(GPIO_I2C_SCL_PIN, 1); + + gpio_set_pull(GPIO_I2C_SCL_PIN, S5P_GPIO_PULL_UP); + gpio_set_pull(GPIO_I2C_SDA_PIN, S5P_GPIO_PULL_UP); + + gpio_set_drv(GPIO_I2C_SCL_PIN, S5P_GPIO_DRV_1X); + gpio_set_drv(GPIO_I2C_SDA_PIN, S5P_GPIO_DRV_1X); +} +#endif #ifdef CONFIG_USB_DWC3 static struct dwc3_device dwc3_device_data = { .maximum_speed = USB_SPEED_SUPER, diff --git a/include/configs/tm2.h b/include/configs/tm2.h index 7836012..3405896 100644 --- a/include/configs/tm2.h +++ b/include/configs/tm2.h @@ -62,6 +62,17 @@ #define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM #define CONFIG_G_DNL_UMS_PRODUCT_NUM 0xA4A5 +/* I2C */ +#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_I2C_SCL_PIN +#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_I2C_SDA_PIN + +#define CONFIG_CMD_I2C +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00 +#define CONFIG_SYS_I2C_INIT_BOARD + /* CONFIG_SYS_TEXT_BASE needs to align with where sboot loads kernel */ #define CONFIG_SYS_TEXT_BASE 0x20080000 @@ -86,12 +97,15 @@ /* Initial environment variables */ #define CONFIG_BOOTCOMMAND "run modedetect" #define CONFIG_EXTRA_ENV_SETTINGS "dfu_alt_info=kernel part 0 9 offset 0x400;rootfs part 0 18;system-data part 0 19;user part 0 21\0" \ - "modedetect=if itest.l *0x10580044 == 0x81 || itest.l *0x10580044 == 0x1 || itest.l *0x105c080c == 0x12345671; then echo Thor mode enabled; run displayimg; mw.l 0x105c080c 0; thor 0 mmc 0; reset; else echo Booting kernel; run boarddetect; run loadkernel; bootm 0x30080000#$board; reset; fi\0" \ + "modedetect=if itest.l *0x10580044 == 0x81 || itest.l *0x10580044 == 0x1 || itest.l *0x105c080c == 0x12345671; then run download; else run bootkernel; fi; reset\0" \ "fdt_high=0xffffffffffffffff\0" \ "bootargs=console=ttySAC1,115200 earlycon=exynos4210,0x14C20000 loglevel=7 root=/dev/mmcblk0p18 rootfstype=ext4 rootwait\0" \ + "bootkernel=echo Booting kernel; run boarddetect; run loadkernel; bootm 0x30080000#$board\0" \ "boarddetect=if itest.l *0x138000b4 == 0x0063f9ff; then setenv board tm2e; elif itest.l *0x138000b4 == 0x0059f9ff; then setenv board tm2; else setenv board unknown; fi; echo Detected $board board\0" \ "loadkernel=part start mmc 0 9 kernel_sect; part size mmc 0 9 kernel_size; mmc read 0x30000000 $kernel_sect $kernel_size\0" \ - "displayimg=unzip 200d0000 67000000; mw.l 138000b4 0059f9ff; mw.l 138001a0 67e10000; mw.l 13800200 00001680; mw.l 13801410 1; mw.l 13802040 e0000018; sleep 1; mw.l 13802040 e0000008\0" + "muicsetusb=i2c mw 25 c 1b; i2c mw 25 d 3b; i2c mw 25 e 05; i2c mw 25 16 f2\0" \ + "displayimg=unzip 200d0000 67000000; mw.l 138000b4 0059f9ff; mw.l 138001a0 67e10000; mw.l 13800200 00001680; mw.l 13801410 1; mw.l 13802040 e0000018; sleep 1; mw.l 13802040 e0000008\0" \ + "download=echo Thor mode enabled; run muicsetusb; run displayimg; mw.l 0x105c080c 0; thor 0 mmc 0\0" #define CONFIG_MENUPROMPT "Loading, please wait..." #define CONFIG_ENV_SIZE 0x1000