From: Florian Fainelli Date: Sun, 31 May 2020 00:11:01 +0000 (-0700) Subject: pinctrl: bcm2835: Add support for wake-up interrupts X-Git-Tag: v5.15~3657^2~6 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=920fecc1aa4591da27ef9dcb338fc5da86b404d7;p=platform%2Fkernel%2Flinux-starfive.git pinctrl: bcm2835: Add support for wake-up interrupts Leverage the IRQCHIP_MASK_ON_SUSPEND flag in order to avoid having to specifically treat the GPIO interrupts during suspend and resume, and simply implement an irq_set_wake() callback that is responsible for enabling the parent wake-up interrupt as a wake-up interrupt. To avoid allocating unnecessary resources for other chips, the wake-up interrupts are only initialized if we have a brcm,bcm7211-gpio compatibility string. Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20200531001101.24945-5-f.fainelli@gmail.com Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 1b00d93..1d21129 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -76,6 +77,7 @@ struct bcm2835_pinctrl { struct device *dev; void __iomem *base; + int *wake_irq; /* note: locking assumes each bank will have its own unsigned long */ unsigned long enabled_irq_map[BCM2835_NUM_BANKS]; @@ -435,6 +437,11 @@ static void bcm2835_gpio_irq_handler(struct irq_desc *desc) chained_irq_exit(host_chip, desc); } +static irqreturn_t bcm2835_gpio_wake_irq_handler(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + static inline void __bcm2835_gpio_irq_config(struct bcm2835_pinctrl *pc, unsigned reg, unsigned offset, bool enable) { @@ -634,6 +641,34 @@ static void bcm2835_gpio_irq_ack(struct irq_data *data) bcm2835_gpio_set_bit(pc, GPEDS0, gpio); } +static int bcm2835_gpio_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + struct bcm2835_pinctrl *pc = gpiochip_get_data(chip); + unsigned gpio = irqd_to_hwirq(data); + unsigned int irqgroup; + int ret = -EINVAL; + + if (!pc->wake_irq) + return ret; + + if (gpio <= 27) + irqgroup = 0; + else if (gpio >= 28 && gpio <= 45) + irqgroup = 1; + else if (gpio >= 46 && gpio <= 57) + irqgroup = 2; + else + return ret; + + if (on) + ret = enable_irq_wake(pc->wake_irq[irqgroup]); + else + ret = disable_irq_wake(pc->wake_irq[irqgroup]); + + return ret; +} + static struct irq_chip bcm2835_gpio_irq_chip = { .name = MODULE_NAME, .irq_enable = bcm2835_gpio_irq_enable, @@ -642,6 +677,8 @@ static struct irq_chip bcm2835_gpio_irq_chip = { .irq_ack = bcm2835_gpio_irq_ack, .irq_mask = bcm2835_gpio_irq_disable, .irq_unmask = bcm2835_gpio_irq_enable, + .irq_set_wake = bcm2835_gpio_irq_set_wake, + .flags = IRQCHIP_MASK_ON_SUSPEND, }; static int bcm2835_pctl_get_groups_count(struct pinctrl_dev *pctldev) @@ -1154,6 +1191,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) struct resource iomem; int err, i; const struct of_device_id *match; + int is_7211 = 0; BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2711_NUM_GPIOS); BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2711_NUM_GPIOS); @@ -1180,6 +1218,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) return -EINVAL; pdata = match->data; + is_7211 = of_device_is_compatible(np, "brcm,bcm7211-gpio"); pc->gpio_chip = *pdata->gpio_chip; pc->gpio_chip.parent = dev; @@ -1214,6 +1253,15 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) GFP_KERNEL); if (!girq->parents) return -ENOMEM; + + if (is_7211) { + pc->wake_irq = devm_kcalloc(dev, BCM2835_NUM_IRQS, + sizeof(*pc->wake_irq), + GFP_KERNEL); + if (!pc->wake_irq) + return -ENOMEM; + } + /* * Use the same handler for all groups: this is necessary * since we use one gpiochip to cover all lines - the @@ -1221,8 +1269,34 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev) * bank that was firing the IRQ and look up the per-group * and bank data. */ - for (i = 0; i < BCM2835_NUM_IRQS; i++) + for (i = 0; i < BCM2835_NUM_IRQS; i++) { + int len; + char *name; + girq->parents[i] = irq_of_parse_and_map(np, i); + if (!is_7211) + continue; + + /* Skip over the all banks interrupts */ + pc->wake_irq[i] = irq_of_parse_and_map(np, i + + BCM2835_NUM_IRQS + 1); + + len = strlen(dev_name(pc->dev)) + 16; + name = devm_kzalloc(pc->dev, len, GFP_KERNEL); + if (!name) + return -ENOMEM; + + snprintf(name, len, "%s:bank%d", dev_name(pc->dev), i); + + /* These are optional interrupts */ + err = devm_request_irq(dev, pc->wake_irq[i], + bcm2835_gpio_wake_irq_handler, + IRQF_SHARED, name, pc); + if (err) + dev_warn(dev, "unable to request wake IRQ %d\n", + pc->wake_irq[i]); + } + girq->default_type = IRQ_TYPE_NONE; girq->handler = handle_level_irq;