From: Nícolas F. R. A. Prado Date: Wed, 6 Dec 2023 23:17:24 +0000 (-0800) Subject: spmi: mtk-pmif: Serialize PMIF status check and command submission X-Git-Tag: v6.6.17~874 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=915fb4043c5e2e7c8378ac47eeb82ddcf7e36930;p=platform%2Fkernel%2Flinux-rpi.git spmi: mtk-pmif: Serialize PMIF status check and command submission [ Upstream commit f200fff8d019f2754f91f5d715652e3e3fdf3604 ] Before writing the read or write command to the SPMI arbiter through the PMIF interface, the current status of the channel is checked to ensure it is idle. However, since the status only changes from idle when the command is written, it is possible for two concurrent calls to determine that the channel is idle and simultaneously send their commands. At this point the PMIF interface hangs, with the status register no longer being updated, and thus causing all subsequent operations to time out. This was observed on the mt8195-cherry-tomato-r2 machine, particularly after commit 46600ab142f8 ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers between 5.10 and 5.15") was applied, since then the two MT6315 devices present on the SPMI bus would probe assynchronously and sometimes (during probe or at a later point) read the bus simultaneously, breaking the PMIF interface and consequently slowing down the whole system. To fix the issue at its root cause, introduce locking around the channel status check and the command write, so that both become an atomic operation, preventing race conditions between two (or more) SPMI bus read/write operations. A spinlock is used since this is a fast bus, as indicated by the usage of the atomic variant of readl_poll, and '.fast_io = true' being used in the mt6315 driver, so spinlocks are already used for the regmap access. Fixes: b45b3ccef8c0 ("spmi: mediatek: Add support for MT6873/8192") Signed-off-by: Nícolas F. R. A. Prado Link: https://lore.kernel.org/r/20230724154739.493724-1-nfraprado@collabora.com Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Alexandre Mergnat Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20231206231733.4031901-2-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c index b3c991e..54c35f5 100644 --- a/drivers/spmi/spmi-mtk-pmif.c +++ b/drivers/spmi/spmi-mtk-pmif.c @@ -50,6 +50,7 @@ struct pmif { struct clk_bulk_data clks[PMIF_MAX_CLKS]; size_t nclks; const struct pmif_data *data; + raw_spinlock_t lock; }; static const char * const pmif_clock_names[] = { @@ -314,6 +315,7 @@ static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, struct ch_reg *inf_reg; int ret; u32 data, cmd; + unsigned long flags; /* Check for argument validation. */ if (sid & ~0xf) { @@ -334,6 +336,7 @@ static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, else return -EINVAL; + raw_spin_lock_irqsave(&arb->lock, flags); /* Wait for Software Interface FSM state to be IDLE. */ inf_reg = &arb->chan; ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], @@ -343,6 +346,7 @@ static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, /* set channel ready if the data has transferred */ if (pmif_is_fsm_vldclr(arb)) pmif_writel(arb, 1, inf_reg->ch_rdy); + raw_spin_unlock_irqrestore(&arb->lock, flags); dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); return ret; } @@ -350,6 +354,7 @@ static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, /* Send the command. */ cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr; pmif_writel(arb, cmd, inf_reg->ch_send); + raw_spin_unlock_irqrestore(&arb->lock, flags); /* * Wait for Software Interface FSM state to be WFVLDCLR, @@ -376,7 +381,8 @@ static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, struct pmif *arb = spmi_controller_get_drvdata(ctrl); struct ch_reg *inf_reg; int ret; - u32 data, cmd; + u32 data, wdata, cmd; + unsigned long flags; if (len > 4) { dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len); @@ -394,6 +400,10 @@ static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, else return -EINVAL; + /* Set the write data. */ + memcpy(&wdata, buf, len); + + raw_spin_lock_irqsave(&arb->lock, flags); /* Wait for Software Interface FSM state to be IDLE. */ inf_reg = &arb->chan; ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta], @@ -403,17 +413,17 @@ static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, /* set channel ready if the data has transferred */ if (pmif_is_fsm_vldclr(arb)) pmif_writel(arb, 1, inf_reg->ch_rdy); + raw_spin_unlock_irqrestore(&arb->lock, flags); dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n"); return ret; } - /* Set the write data. */ - memcpy(&data, buf, len); - pmif_writel(arb, data, inf_reg->wdata); + pmif_writel(arb, wdata, inf_reg->wdata); /* Send the command. */ cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr; pmif_writel(arb, cmd, inf_reg->ch_send); + raw_spin_unlock_irqrestore(&arb->lock, flags); return 0; } @@ -488,6 +498,8 @@ static int mtk_spmi_probe(struct platform_device *pdev) arb->chan.ch_send = PMIF_SWINF_0_ACC + chan_offset; arb->chan.ch_rdy = PMIF_SWINF_0_VLD_CLR + chan_offset; + raw_spin_lock_init(&arb->lock); + platform_set_drvdata(pdev, ctrl); err = spmi_controller_add(ctrl);