From: Yinghai Lu Date: Thu, 17 Mar 2011 03:01:07 +0000 (-0700) Subject: watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase. X-Git-Tag: v3.0~1114^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=90d241edd13bdeef70f264b569f7e150bf23621e;p=platform%2Fkernel%2Flinux-amlogic.git watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase. Stefano found SP5100 TCO watchdog driver using wrong address. [ 9.148536] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 9.148628] DEBUG __ioremap_caller WARNING address=b8fe00 size=8 valid=1 reserved=1 and e820 said that range is RAM. We should check if we can use that reading out. BIOS could just program wrong address there. Reported-by: Stefano Stabellini Signed-off-by:Yinghai Lu Acked-by: Mike Waychison Tested-by: Konrad Rzeszutek Wilk Signed-off-by: Wim Van Sebroeck Cc: stable --- diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index 1bc4938..87e0527 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -42,6 +42,7 @@ #define PFX TCO_MODULE_NAME ": " /* internal variables */ +static u32 tcobase_phys; static void __iomem *tcobase; static unsigned int pm_iobase; static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */ @@ -305,10 +306,18 @@ static unsigned char __devinit sp5100_tco_setupdevice(void) /* Low three bits of BASE0 are reserved. */ val = val << 8 | (inb(SP5100_IO_PM_DATA_REG) & 0xf8); + if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE, + "SP5100 TCO")) { + printk(KERN_ERR PFX "mmio address 0x%04x already in use\n", + val); + goto unreg_region; + } + tcobase_phys = val; + tcobase = ioremap(val, SP5100_WDT_MEM_MAP_SIZE); if (tcobase == 0) { printk(KERN_ERR PFX "failed to get tcobase address\n"); - goto unreg_region; + goto unreg_mem_region; } /* Enable watchdog decode bit */ @@ -346,7 +355,8 @@ static unsigned char __devinit sp5100_tco_setupdevice(void) /* Done */ return 1; - iounmap(tcobase); +unreg_mem_region: + release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); unreg_region: release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); exit: @@ -401,6 +411,7 @@ static int __devinit sp5100_tco_init(struct platform_device *dev) exit: iounmap(tcobase); + release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); return ret; } @@ -414,6 +425,7 @@ static void __devexit sp5100_tco_cleanup(void) /* Deregister */ misc_deregister(&sp5100_tco_miscdev); iounmap(tcobase); + release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE); release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE); }