From: Rafał Miłecki Date: Wed, 8 Aug 2012 17:37:04 +0000 (+0200) Subject: ssb: check for flash presentence X-Git-Tag: v3.7-rc1~70^2~42^2~24 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=902d9e0f48ddc18fb37c1b1edf5e3b27aaba1505;p=platform%2Fkernel%2Flinux-exynos.git ssb: check for flash presentence We can not assume parallel flash is always present, there are boards with *serial* flash and probably some without flash at all. Define some bits by the way. Signed-off-by: Rafał Miłecki Reviewed-by: Hauke Mehrtens Signed-off-by: John W. Linville --- diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 7e2ddc0..c625086 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -190,16 +190,30 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) { struct ssb_bus *bus = mcore->dev->bus; - mcore->flash_buswidth = 2; - if (bus->chipco.dev) { - mcore->flash_window = 0x1c000000; - mcore->flash_window_size = 0x02000000; + /* When there is no chipcommon on the bus there is 4MB flash */ + if (!bus->chipco.dev) { + mcore->flash_buswidth = 2; + mcore->flash_window = SSB_FLASH1; + mcore->flash_window_size = SSB_FLASH1_SZ; + return; + } + + /* There is ChipCommon, so use it to read info about flash */ + switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { + case SSB_CHIPCO_FLASHT_STSER: + case SSB_CHIPCO_FLASHT_ATSER: + pr_err("Serial flash not supported\n"); + break; + case SSB_CHIPCO_FLASHT_PARA: + pr_debug("Found parallel flash\n"); + mcore->flash_window = SSB_FLASH2; + mcore->flash_window_size = SSB_FLASH2_SZ; if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) & SSB_CHIPCO_CFG_DS16) == 0) mcore->flash_buswidth = 1; - } else { - mcore->flash_window = 0x1fc00000; - mcore->flash_window_size = 0x00400000; + else + mcore->flash_buswidth = 2; + break; } } diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 1a6b004..c2b02a5 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -504,7 +504,9 @@ #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ #define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ -#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */ +#define SSB_CHIPCO_FLASHCTL_ST_RES 0x03AB /* Read Electronic Signature */ +#define SSB_CHIPCO_FLASHCTL_ST_CSA 0x1000 /* Keep chip select asserted */ +#define SSB_CHIPCO_FLASHCTL_ST_SSE 0x0220 /* Sub-sector Erase */ /* Status register bits for ST flashes */ #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */