From: David Brownell Date: Sat, 2 Sep 2006 10:13:45 +0000 (-0700) Subject: USB: net2280: update dma buffer allocation X-Git-Tag: upstream/snapshot3+hdmi~37961^2~35 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=901b3d75e71535f29b64f352e94ff474d95df475;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git USB: net2280: update dma buffer allocation This updates the code handling dma-coherent buffer allocations, basically reusing code from the musb_hdrc driver. Instead of trying to work around two significant limitations of the dma framework (memory wastage for buffers smaller than a page, and inconsistency between calling context requirements for allocation and free) this just works around one of them (the latter). So count this as two steps forward (bugfixes: the latter issue could cause errors on some platforms, and some MIPS changes broke code for the former), and one step back (increasing cross-platform memory wastage). Plus linelength and whitespace fixes; and minor data segment shrinkage. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 0924323..3bda37f 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -2,7 +2,7 @@ * Driver for the PLX NET2280 USB device controller. * Specs and errata are available from . * - * PLX Technology Inc. (formerly NetChip Technology) supported the + * PLX Technology Inc. (formerly NetChip Technology) supported the * development of this driver. * * @@ -26,7 +26,8 @@ * Copyright (C) 2003 David Brownell * Copyright (C) 2003-2005 PLX Technology, Inc. * - * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip + * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility + * with 2282 chip * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -85,7 +86,7 @@ static const char driver_name [] = "net2280"; static const char driver_desc [] = DRIVER_DESC; static const char ep0name [] = "ep0"; -static const char *ep_name [] = { +static const char *const ep_name [] = { ep0name, "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f", @@ -225,7 +226,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) if (!ep->is_in) writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp); else if (dev->pdev->device != 0x2280) { - /* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */ + /* Added for 2282, Don't use nak packets on an in endpoint, + * this was ignored on 2280 + */ writel ((1 << CLEAR_NAK_OUT_PACKETS) | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp); } @@ -288,7 +291,7 @@ static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec) return -ETIMEDOUT; } -static struct usb_ep_ops net2280_ep_ops; +static const struct usb_ep_ops net2280_ep_ops; static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep) { @@ -449,34 +452,15 @@ net2280_free_request (struct usb_ep *_ep, struct usb_request *_req) /*-------------------------------------------------------------------------*/ -#undef USE_KMALLOC - -/* many common platforms have dma-coherent caches, which means that it's - * safe to use kmalloc() memory for all i/o buffers without using any - * cache flushing calls. (unless you're trying to share cache lines - * between dma and non-dma activities, which is a slow idea in any case.) +/* + * dma-coherent memory allocation (for dma-capable endpoints) * - * other platforms need more care, with 2.5 having a moderately general - * solution (which falls down for allocations smaller than one page) - * that improves significantly on the 2.4 PCI allocators by removing - * the restriction that memory never be freed in_interrupt(). + * NOTE: the dma_*_coherent() API calls suck. Most implementations are + * (a) page-oriented, so small buffers lose big; and (b) asymmetric with + * respect to calls with irqs disabled: alloc is safe, free is not. + * We currently work around (b), but not (a). */ -#if defined(CONFIG_X86) -#define USE_KMALLOC - -#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) -#define USE_KMALLOC -#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT) -#define USE_KMALLOC - -/* FIXME there are other cases, including an x86-64 one ... */ -#endif - -/* allocating buffers this way eliminates dma mapping overhead, which - * on some platforms will mean eliminating a per-io buffer copy. with - * some kinds of system caches, further tweaks may still be needed. - */ static void * net2280_alloc_buffer ( struct usb_ep *_ep, @@ -493,43 +477,71 @@ net2280_alloc_buffer ( return NULL; *dma = DMA_ADDR_INVALID; -#if defined(USE_KMALLOC) - retval = kmalloc(bytes, gfp_flags); - if (retval) - *dma = virt_to_phys(retval); -#else - if (ep->dma) { - /* the main problem with this call is that it wastes memory - * on typical 1/N page allocations: it allocates 1-N pages. - */ -#warning Using dma_alloc_coherent even with buffers smaller than a page. + if (ep->dma) retval = dma_alloc_coherent(&ep->dev->pdev->dev, bytes, dma, gfp_flags); - } else + else retval = kmalloc(bytes, gfp_flags); -#endif return retval; } +static DEFINE_SPINLOCK(buflock); +static LIST_HEAD(buffers); + +struct free_record { + struct list_head list; + struct device *dev; + unsigned bytes; + dma_addr_t dma; +}; + +static void do_free(unsigned long ignored) +{ + spin_lock_irq(&buflock); + while (!list_empty(&buffers)) { + struct free_record *buf; + + buf = list_entry(buffers.next, struct free_record, list); + list_del(&buf->list); + spin_unlock_irq(&buflock); + + dma_free_coherent(buf->dev, buf->bytes, buf, buf->dma); + + spin_lock_irq(&buflock); + } + spin_unlock_irq(&buflock); +} + +static DECLARE_TASKLET(deferred_free, do_free, 0); + static void net2280_free_buffer ( struct usb_ep *_ep, - void *buf, + void *address, dma_addr_t dma, unsigned bytes ) { /* free memory into the right allocator */ -#ifndef USE_KMALLOC if (dma != DMA_ADDR_INVALID) { struct net2280_ep *ep; + struct free_record *buf = address; + unsigned long flags; ep = container_of(_ep, struct net2280_ep, ep); if (!_ep) return; - dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma); + + ep = container_of (_ep, struct net2280_ep, ep); + buf->dev = &ep->dev->pdev->dev; + buf->bytes = bytes; + buf->dma = dma; + + spin_lock_irqsave(&buflock, flags); + list_add_tail(&buf->list, &buffers); + tasklet_schedule(&deferred_free); + spin_unlock_irqrestore(&buflock, flags); } else -#endif - kfree (buf); + kfree (address); } /*-------------------------------------------------------------------------*/ @@ -737,7 +749,8 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid) */ if (ep->is_in) dmacount |= (1 << DMA_DIRECTION); - if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280) + if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) + || ep->dev->pdev->device != 0x2280) dmacount |= (1 << END_OF_CHAIN); req->valid = valid; @@ -812,7 +825,7 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req) /* previous OUT packet might have been short */ if (!ep->is_in && ((tmp = readl (&ep->regs->ep_stat)) - & (1 << NAK_OUT_PACKETS)) != 0) { + & (1 << NAK_OUT_PACKETS)) != 0) { writel ((1 << SHORT_PACKET_TRANSFERRED_INTERRUPT), &ep->regs->ep_stat); @@ -1373,7 +1386,7 @@ net2280_fifo_flush (struct usb_ep *_ep) (void) readl (&ep->regs->ep_rsp); } -static struct usb_ep_ops net2280_ep_ops = { +static const struct usb_ep_ops net2280_ep_ops = { .enable = net2280_enable, .disable = net2280_disable, @@ -1631,7 +1644,7 @@ show_registers (struct device *_dev, struct device_attribute *attr, char *buf) } /* Indexed Registers */ - // none yet + // none yet /* Statistics */ t = scnprintf (next, size, "\nirqs: "); @@ -1691,11 +1704,11 @@ show_queues (struct device *_dev, struct device_attribute *attr, char *buf) ({ char *val; switch (d->bmAttributes & 0x03) { case USB_ENDPOINT_XFER_BULK: - val = "bulk"; break; + val = "bulk"; break; case USB_ENDPOINT_XFER_INT: - val = "intr"; break; + val = "intr"; break; default: - val = "iso"; break; + val = "iso"; break; }; val; }), le16_to_cpu (d->wMaxPacketSize) & 0x1fff, ep->dma ? "dma" : "pio", ep->fifo_size @@ -1808,8 +1821,8 @@ extern int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode); * net2280_set_fifo_mode - change allocation of fifo buffers * @gadget: access to the net2280 device that will be updated * @mode: 0 for default, four 1kB buffers (ep-a through ep-d); - * 1 for two 2kB buffers (ep-a and ep-b only); - * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c). + * 1 for two 2kB buffers (ep-a and ep-b only); + * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c). * * returns zero on success, else negative errno. when this succeeds, * the contents of gadget->ep_list may have changed. @@ -2241,7 +2254,8 @@ static void handle_ep_small (struct net2280_ep *ep) req->td->dmacount = 0; t = readl (&ep->regs->ep_avail); dma_done (ep, req, count, - (ep->out_overflow || t) ? -EOVERFLOW : 0); + (ep->out_overflow || t) + ? -EOVERFLOW : 0); } /* also flush to prevent erratum 0106 trouble */ @@ -2411,7 +2425,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) , &ep->regs->ep_stat); u.raw [0] = readl (&dev->usb->setup0123); u.raw [1] = readl (&dev->usb->setup4567); - + cpu_to_le32s (&u.raw [0]); cpu_to_le32s (&u.raw [1]); @@ -2578,14 +2592,16 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set. * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and - * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT + * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT * only indicates a change in the reset state). */ if (stat & tmp) { writel (tmp, &dev->regs->irqstat1); - if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) && - ((readl (&dev->usb->usbstat) & mask) == 0)) - || ((readl (&dev->usb->usbctl) & (1 << VBUS_PIN)) == 0) + if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) + && ((readl (&dev->usb->usbstat) & mask) + == 0)) + || ((readl (&dev->usb->usbctl) + & (1 << VBUS_PIN)) == 0) ) && ( dev->gadget.speed != USB_SPEED_UNKNOWN)) { DEBUG (dev, "disconnect %s\n", dev->driver->driver.name); @@ -2852,7 +2868,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) /* now all the pci goodies ... */ if (pci_enable_device (pdev) < 0) { - retval = -ENODEV; + retval = -ENODEV; goto done; } dev->enabled = 1; @@ -2870,6 +2886,10 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) } dev->region = 1; + /* FIXME provide firmware download interface to put + * 8051 code into the chip, e.g. to turn on PCI PM. + */ + base = ioremap_nocache (resource, len); if (base == NULL) { DEBUG (dev, "can't map memory\n"); @@ -2984,16 +3004,16 @@ static void net2280_shutdown (struct pci_dev *pdev) /*-------------------------------------------------------------------------*/ -static struct pci_device_id pci_ids [] = { { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, +static const struct pci_device_id pci_ids [] = { { + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, .vendor = 0x17cc, .device = 0x2280, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, }, { - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, + .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), + .class_mask = ~0, .vendor = 0x17cc, .device = 0x2282, .subvendor = PCI_ANY_ID,