From: Jerome Brunet Date: Fri, 2 Mar 2018 13:44:36 +0000 (+0100) Subject: ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate X-Git-Tag: v4.14.36~146 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8fdbba69cb3424b8ff470da40980d4edfec19769;p=platform%2Fkernel%2Flinux-exynos.git ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate commit c04ffa71ff491220cac28f55237c9aad379a8656 upstream. Different modules maybe installed by the user on the eMMC connector of the odroid-c2. While the red modules are working without an issue, it seems some black modules (apparently Samsung based) are having issue at 200MHz While the tuning algorithm introduced in v4.14 enables high speed modes on every other tested designs, it seems a problem remains for this particular combination of board and eMMC module. Lowering the maximum frequency of the eMMC on this board until we can figure out a better solution. Fixes: d341ca88eead ("mmc: meson-gx: rework tuning function") Suggested-by: Ellie Reeves Signed-off-by: Jerome Brunet Cc: stable@vger.kernel.org Signed-off-by: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 08b7bb7..c3c65b0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -276,7 +276,7 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - max-frequency = <200000000>; + max-frequency = <100000000>; non-removable; disable-wp; cap-mmc-highspeed;