From: Johan Hovold Date: Wed, 31 Aug 2022 08:15:24 +0000 (+0200) Subject: USB: serial: ch341: fix lost character on LCR updates X-Git-Tag: v6.6.17~6685^2~2^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8e83622ae7ca481c76c8fd9579877f6abae64ca2;p=platform%2Fkernel%2Flinux-rpi.git USB: serial: ch341: fix lost character on LCR updates Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost. Note that updating LCR using the INIT command has no effect on these devices either. Reported-by: Jonathan Woithe Tested-by: Jonathan Woithe Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold --- diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 2798fca..2bcce17 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -97,7 +97,10 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + unsigned long quirks; + u8 version; + unsigned long break_end; }; @@ -265,6 +268,9 @@ static int ch341_set_baudrate_lcr(struct usb_device *dev, * (stop bits, parity and word length). Version 0x30 and above use * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero. */ + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr); if (r) @@ -308,7 +314,9 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r) return r; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version); r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0)