From: Marek Vasut Date: Mon, 19 Sep 2022 19:41:16 +0000 (+0200) Subject: ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init() X-Git-Tag: v2023.07~287^2~55 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8e374457bad7ab9dcaae580cfbbd2b1ca02c46a1;p=platform%2Fkernel%2Fu-boot.git ARM: imx8m: phycore_imx8mm: Drop bogus spl_board_init() The current implementation of spl_board_init() is not correct, the MX8MM BootROM v1 does not support SDP load when re-entered from U-Boot SPL, it is up to U-Boot to perform the next stage load using its own internal CI gadget driver and SDP protocol implementation. Drop the spl_board_init() to let SPL continue with normal load in case the SDP support is enabled. Signed-off-by: Marek Vasut Reviewed-by: Peng Fan --- diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c index d87ab6d..1bae9b1 100644 --- a/board/phytec/phycore_imx8mm/spl.c +++ b/board/phytec/phycore_imx8mm/spl.c @@ -42,16 +42,6 @@ static void spl_dram_init(void) ddr_init(&dram_timing); } -void spl_board_init(void) -{ - /* Serial download mode */ - if (is_usb_boot()) { - puts("Back to ROM, SDP\n"); - restore_boot_params(); - } - puts("Normal Boot\n"); -} - int board_fit_config_name_match(const char *name) { return 0; diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 9b8c09a..e8d7905 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -30,7 +30,6 @@ CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 -CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK=0x920000 CONFIG_SYS_SPL_MALLOC=y