From: Wei Ni Date: Thu, 21 Feb 2019 10:18:46 +0000 (+0800) Subject: of: Add bindings of OC hw throttle for Tegra soctherm X-Git-Tag: v5.4-rc1~970^2~51 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8d3d462b684a064a45e68b64d40e9937966802d9;p=platform%2Fkernel%2Flinux-rpi.git of: Add bindings of OC hw throttle for Tegra soctherm Add OC HW throttle configuration for soctherm in DT. It is used to describe the OCx throttle events. Signed-off-by: Wei Ni Signed-off-by: Eduardo Valentin --- diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt index cf6d0be..f02f385 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -64,6 +64,20 @@ Required properties : - #cooling-cells: Should be 1. This cooling device only support on/off state. See ./thermal.txt for a description of this property. + Optional properties: The following properties are T210 specific and + valid only for OCx throttle events. + - nvidia,count-threshold: Specifies the number of OC events that are + required for triggering an interrupt. Interrupts are not triggered if + the property is missing. A value of 0 will interrupt on every OC alarm. + - nvidia,polarity-active-low: Configures the polarity of the OC alaram + signal. If present, this means assert low, otherwise assert high. + - nvidia,alarm-filter: Number of clocks to filter event. When the filter + expires (which means the OC event has not occurred for a long time), + the counter is cleared and filter is rearmed. Default value is 0. + - nvidia,throttle-period-us: Specifies the number of uSec for which + throttling is engaged after the OC event is deasserted. Default value + is 0. + Optional properties: - nvidia,thermtrips : When present, this property specifies the temperature at which the soctherm hardware will assert the thermal trigger signal to the @@ -134,6 +148,17 @@ Example : * arbiter will select the highest priority as the final throttle * settings to skip cpu pulse. */ + + throttle_oc1: oc1 { + nvidia,priority = <50>; + nvidia,polarity-active-low; + nvidia,count-threshold = <100>; + nvidia,alarm-filter = <5100000>; + nvidia,throttle-period-us = <0>; + nvidia,cpu-throt-percent = <75>; + nvidia,gpu-throt-level = + ; + }; }; };