From: Sergey Shtylyov Date: Sat, 19 Feb 2022 17:44:43 +0000 (+0300) Subject: ata: pata_hpt37x: disable primary channel on HPT371 X-Git-Tag: v6.6.17~8128^2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8d093e02e898b24c58788b0289e3202317a96d2a;p=platform%2Fkernel%2Flinux-rpi.git ata: pata_hpt37x: disable primary channel on HPT371 The HPT371 chip physically has only one channel, the secondary one, however the primary channel registers do exist! Thus we have to manually disable the non-existing channel if the BIOS hasn't done this already. Similarly to the pata_hpt3x2n driver, always disable the primary channel. Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal --- diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 1baaca7..6fa4a2f 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -920,6 +920,20 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_write_config_byte(dev, 0x5a, irqmask); /* + * HPT371 chips physically have only one channel, the secondary one, + * but the primary channel registers do exist! Go figure... + * So, we manually disable the non-existing channel here + * (if the BIOS hasn't done this already). + */ + if (dev->device == PCI_DEVICE_ID_TTI_HPT371) { + u8 mcr1; + + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + } + + /* * default to pci clock. make sure MA15/16 are set to output * to prevent drives having problems with 40-pin cables. Needed * for some drives such as IBM-DTLA which will not enter ready