From: Marc Zyngier Date: Thu, 3 Feb 2022 17:05:02 +0000 (+0000) Subject: clocksource/drivers/arm_arch_timer: Use event stream scaling when available X-Git-Tag: v6.1-rc5~1820^2^2~6 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8c4b810a87005eb46564a48a69b5b255e515fa62;p=platform%2Fkernel%2Flinux-starfive.git clocksource/drivers/arm_arch_timer: Use event stream scaling when available With FEAT_ECV and the 1GHz counter, it is pretty likely that the event stream divider doesn't fit in the field that holds the divider value (we only have 4 bits to describe counter bits [15:0] Thankfully, FEAT_ECV also provides a scaling mechanism to switch the field to cover counter bits [23:8] instead. Enable this on arm64 when ECV is available (32bit doesn't have any detection infrastructure and is unlikely to be run on an ARMv8.6 system anyway). Signed-off-by: Marc Zyngier Cc: Mark Rutland Cc: Daniel Lezcano Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20220203170502.2694422-1-maz@kernel.org Signed-off-by: Daniel Lezcano --- diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 1ecd52f..9ab8221 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -880,10 +880,19 @@ static void __arch_timer_setup(unsigned type, clockevents_config_and_register(clk, arch_timer_rate, 0xf, max_delta); } -static void arch_timer_evtstrm_enable(int divider) +static void arch_timer_evtstrm_enable(unsigned int divider) { u32 cntkctl = arch_timer_get_cntkctl(); +#ifdef CONFIG_ARM64 + /* ECV is likely to require a large divider. Use the EVNTIS flag. */ + if (cpus_have_const_cap(ARM64_HAS_ECV) && divider > 15) { + cntkctl |= ARCH_TIMER_EVT_INTERVAL_SCALE; + divider -= 8; + } +#endif + + divider = min(divider, 15U); cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK; /* Set the divider and enable virtual event stream */ cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT) @@ -912,7 +921,7 @@ static void arch_timer_configure_evtstream(void) lsb++; /* enable event stream */ - arch_timer_evtstrm_enable(max(0, min(lsb, 15))); + arch_timer_evtstrm_enable(max(0, lsb)); } static void arch_counter_set_user_access(void) diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h index e715bdb..057c896 100644 --- a/include/clocksource/arm_arch_timer.h +++ b/include/clocksource/arm_arch_timer.h @@ -56,6 +56,7 @@ enum arch_timer_spi_nr { #define ARCH_TIMER_EVT_TRIGGER_MASK (0xF << ARCH_TIMER_EVT_TRIGGER_SHIFT) #define ARCH_TIMER_USR_VT_ACCESS_EN (1 << 8) /* virtual timer registers */ #define ARCH_TIMER_USR_PT_ACCESS_EN (1 << 9) /* physical timer registers */ +#define ARCH_TIMER_EVT_INTERVAL_SCALE (1 << 17) /* EVNTIS in the ARMv8 ARM */ #define ARCH_TIMER_EVT_STREAM_PERIOD_US 100 #define ARCH_TIMER_EVT_STREAM_FREQ \