From: Jeff Long Date: Wed, 28 Nov 2007 16:02:09 +0000 (-0500) Subject: USB: cp2101: new device id X-Git-Tag: v2.6.24-rc6~60^2~7 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8be27c2de64e95c3da12a4b002f623570b039874;p=platform%2Fkernel%2Flinux-exynos.git USB: cp2101: new device id This adds a device ID for the Aerocomm Radio Modem, which uses the cp2102. I'm sure changing num_bulk_in/num_bulk_out to NUM_DONT_CARE is the wrong fix, but this is the only device I have with a cp2102, so I have no idea what a good global value would be, if there is one. Zero didn't work with this device. From: Jeff Long Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 3a83cb4..da16b51 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -71,6 +71,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ @@ -98,8 +99,8 @@ static struct usb_serial_driver cp2101_device = { .usb_driver = &cp2101_driver, .id_table = id_table, .num_interrupt_in = 0, - .num_bulk_in = 0, - .num_bulk_out = 0, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, .num_ports = 1, .open = cp2101_open, .close = cp2101_close,