From: 周琰杰 (Zhou Yanjie) Date: Sun, 15 Dec 2019 16:21:03 +0000 (+0800) Subject: dt-bindings: pinctrl: Add bindings for Ingenic X1830. X-Git-Tag: v5.15~4627^2~28 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8bc49f4489bb1a4552a10f51bc642286509a9694;p=platform%2Fkernel%2Flinux-starfive.git dt-bindings: pinctrl: Add bindings for Ingenic X1830. Add the pinctrl bindings for the X1830 Soc from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) Acked-by: Rob Herring Link: https://lore.kernel.org/r/1576426864-35348-6-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt index 0014d98..d9b2100 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt @@ -10,9 +10,9 @@ GPIO port configuration registers and it is typical to refer to pins using the naming scheme "PxN" where x is a character identifying the GPIO port with which the pin is associated and N is an integer from 0 to 31 identifying the pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and -PB31 is the last pin in GPIO port B. The jz4740 and the x1000 contains 4 GPIO -ports, PA to PD, for a total of 128 pins. The jz4760, the jz4770 and the jz4780 -contains 6 GPIO ports, PA to PF, for a total of 192 pins. +PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830 +contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the +jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins. Required properties: @@ -28,6 +28,7 @@ Required properties: - "ingenic,x1000-pinctrl" - "ingenic,x1000e-pinctrl" - "ingenic,x1500-pinctrl" + - "ingenic,x1830-pinctrl" - reg: Address range of the pinctrl registers. @@ -40,6 +41,7 @@ Required properties for sub-nodes (GPIO chips): - "ingenic,jz4770-gpio" - "ingenic,jz4780-gpio" - "ingenic,x1000-gpio" + - "ingenic,x1830-gpio" - reg: The GPIO bank number. - interrupt-controller: Marks the device node as an interrupt controller. - interrupts: Interrupt specifier for the controllers interrupt.