From: Tom Rini Date: Thu, 9 Sep 2021 11:54:50 +0000 (-0400) Subject: arm: Remove zmx25 board and ARCH_MX25 X-Git-Tag: v2022.01~102^2~1^2~6 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8ba59608dc8607a5dac1c063502c548f7f9645bb;p=platform%2Fkernel%2Fu-boot.git arm: Remove zmx25 board and ARCH_MX25 This board has not been converted to CONFIG_DM by the deadline. Remove it. As this is the last ARCH_MX25 platform, remove those references as well. Cc: Matthias Weisser Cc: Stefano Babic Signed-off-by: Tom Rini --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6675a633f8..ebb1927270 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -854,13 +854,6 @@ config ARCH_MX23 select PL011_SERIAL select SUPPORT_SPL -config ARCH_MX25 - bool "NXP MX25" - select CPU_ARM926EJS - select GPIO_EXTRA_HEADER - select MACH_IMX - imply MXC_GPIO - config ARCH_MX28 bool "NXP i.MX28 family" select CPU_ARM926EJS @@ -2057,8 +2050,6 @@ source "arch/arm/mach-octeontx2/Kconfig" source "arch/arm/cpu/armv7/ls102xa/Kconfig" -source "arch/arm/mach-imx/mx2/Kconfig" - source "arch/arm/mach-imx/mx3/Kconfig" source "arch/arm/mach-imx/mx5/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile index a6b29af8f4..b901b7c5c9 100644 --- a/arch/arm/cpu/arm926ejs/Makefile +++ b/arch/arm/cpu/arm926ejs/Makefile @@ -12,7 +12,6 @@ extra-y := endif endif -obj-$(CONFIG_MX25) += mx25/ obj-$(CONFIG_MX27) += mx27/ obj-$(if $(filter mxs,$(SOC)),y) += mxs/ obj-$(if $(filter spear,$(SOC)),y) += spear/ diff --git a/arch/arm/cpu/arm926ejs/mx25/Makefile b/arch/arm/cpu/arm926ejs/mx25/Makefile deleted file mode 100644 index ac5ebaf5ef..0000000000 --- a/arch/arm/cpu/arm926ejs/mx25/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# - -obj-y += generic.o timer.o reset.o relocate.o diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c deleted file mode 100644 index 9cd60abccc..0000000000 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ /dev/null @@ -1,274 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby - * - * Based on mx27/generic.c: - * Copyright (c) 2008 Eric Jarrige - * Copyright (c) 2009 Ilya Yanok - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_FSL_ESDHC_IMX -#include - -DECLARE_GLOBAL_DATA_PTR; -#endif - -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref) -{ - unsigned int mfi = (pll >> CCM_PLL_MFI_SHIFT) - & CCM_PLL_MFI_MASK; - int mfn = (pll >> CCM_PLL_MFN_SHIFT) - & CCM_PLL_MFN_MASK; - unsigned int mfd = (pll >> CCM_PLL_MFD_SHIFT) - & CCM_PLL_MFD_MASK; - unsigned int pd = (pll >> CCM_PLL_PD_SHIFT) - & CCM_PLL_PD_MASK; - - mfi = mfi <= 5 ? 5 : mfi; - mfn = mfn >= 512 ? mfn - 1024 : mfn; - mfd += 1; - pd += 1; - - return lldiv(2 * (u64) f_ref * (mfi * mfd + mfn), - mfd * pd); -} - -static ulong imx_get_mpllclk(void) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - ulong fref = MXC_HCLK; - - return imx_decode_pll(readl(&ccm->mpctl), fref); -} - -static ulong imx_get_upllclk(void) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - ulong fref = MXC_HCLK; - - return imx_decode_pll(readl(&ccm->upctl), fref); -} - -static ulong imx_get_armclk(void) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - ulong cctl = readl(&ccm->cctl); - ulong fref = imx_get_mpllclk(); - ulong div; - - if (cctl & CCM_CCTL_ARM_SRC) - fref = lldiv((u64) fref * 3, 4); - - div = ((cctl >> CCM_CCTL_ARM_DIV_SHIFT) - & CCM_CCTL_ARM_DIV_MASK) + 1; - - return fref / div; -} - -static ulong imx_get_ahbclk(void) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - ulong cctl = readl(&ccm->cctl); - ulong fref = imx_get_armclk(); - ulong div; - - div = ((cctl >> CCM_CCTL_AHB_DIV_SHIFT) - & CCM_CCTL_AHB_DIV_MASK) + 1; - - return fref / div; -} - -static ulong imx_get_ipgclk(void) -{ - return imx_get_ahbclk() / 2; -} - -static ulong imx_get_perclk(int clk) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - ulong fref = readl(&ccm->mcr) & (1 << clk) ? imx_get_upllclk() : - imx_get_ahbclk(); - ulong div; - - div = readl(&ccm->pcdr[CCM_PERCLK_REG(clk)]); - div = ((div >> CCM_PERCLK_SHIFT(clk)) & CCM_PERCLK_MASK) + 1; - - return fref / div; -} - -int imx_set_perclk(enum mxc_clock clk, bool from_upll, unsigned int freq) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - ulong fref = from_upll ? imx_get_upllclk() : imx_get_ahbclk(); - ulong div = (fref + freq - 1) / freq; - - if (clk > MXC_UART_CLK || !div || --div > CCM_PERCLK_MASK) - return -EINVAL; - - clrsetbits_le32(&ccm->pcdr[CCM_PERCLK_REG(clk)], - CCM_PERCLK_MASK << CCM_PERCLK_SHIFT(clk), - div << CCM_PERCLK_SHIFT(clk)); - if (from_upll) - setbits_le32(&ccm->mcr, 1 << clk); - else - clrbits_le32(&ccm->mcr, 1 << clk); - return 0; -} - -unsigned int mxc_get_clock(enum mxc_clock clk) -{ - if (clk >= MXC_CLK_NUM) - return -1; - switch (clk) { - case MXC_ARM_CLK: - return imx_get_armclk(); - case MXC_AHB_CLK: - return imx_get_ahbclk(); - case MXC_IPG_CLK: - case MXC_CSPI_CLK: - case MXC_FEC_CLK: - return imx_get_ipgclk(); - default: - return imx_get_perclk(clk); - } -} - -u32 get_cpu_rev(void) -{ - u32 srev; - u32 system_rev = 0x25000; - - /* read SREV register from IIM module */ - struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; - srev = readl(&iim->iim_srev); - - switch (srev) { - case 0x00: - system_rev |= CHIP_REV_1_0; - break; - case 0x01: - system_rev |= CHIP_REV_1_1; - break; - case 0x02: - system_rev |= CHIP_REV_1_2; - break; - default: - system_rev |= 0x8000; - break; - } - - return system_rev; -} - -#if defined(CONFIG_DISPLAY_CPUINFO) -static char *get_reset_cause(void) -{ - /* read RCSR register from CCM module */ - struct ccm_regs *ccm = - (struct ccm_regs *)IMX_CCM_BASE; - - u32 cause = readl(&ccm->rcsr) & 0x0f; - - if (cause == 0) - return "POR"; - else if (cause == 1) - return "RST"; - else if ((cause & 2) == 2) - return "WDOG"; - else if ((cause & 4) == 4) - return "SW RESET"; - else if ((cause & 8) == 8) - return "JTAG"; - else - return "unknown reset"; - -} - -int print_cpuinfo(void) -{ - char buf[32]; - u32 cpurev = get_cpu_rev(); - - printf("CPU: Freescale i.MX25 rev%d.%d%s at %s MHz\n", - (cpurev & 0xF0) >> 4, (cpurev & 0x0F), - ((cpurev & 0x8000) ? " unknown" : ""), - strmhz(buf, imx_get_armclk())); - printf("Reset cause: %s\n", get_reset_cause()); - return 0; -} -#endif - -#if defined(CONFIG_FEC_MXC) -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(struct bd_info *bis) -{ - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - ulong val; - - val = readl(&ccm->cgr0); - val |= (1 << 23); - writel(val, &ccm->cgr0); - return fecmxc_initialize(bis); -} -#endif - -int get_clocks(void) -{ -#ifdef CONFIG_FSL_ESDHC_IMX -#if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE - gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); -#else - gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); -#endif -#endif - return 0; -} - -#ifdef CONFIG_FSL_ESDHC_IMX -/* - * Initializes on-chip MMC controllers. - * to override, implement board_mmc_init() - */ -int cpu_mmc_init(struct bd_info *bis) -{ - return fsl_esdhc_mmc_init(bis); -} -#endif - -#ifdef CONFIG_FEC_MXC -void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) -{ - int i; - struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; - struct fuse_bank *bank = &iim->bank[0]; - struct fuse_bank0_regs *fuse = - (struct fuse_bank0_regs *)bank->fuse_regs; - - for (i = 0; i < 6; i++) - mac[i] = readl(&fuse->mac_addr[i]) & 0xff; -} -#endif /* CONFIG_FEC_MXC */ diff --git a/arch/arm/cpu/arm926ejs/mx25/relocate.S b/arch/arm/cpu/arm926ejs/mx25/relocate.S deleted file mode 100644 index 709e35c818..0000000000 --- a/arch/arm/cpu/arm926ejs/mx25/relocate.S +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * relocate - i.MX25-specific vector relocation - * - * Copyright (c) 2013 Albert ARIBAUD - */ - -#include - -/* - * The i.MX25 SoC is very specific with respect to exceptions: it - * does not provide RAM at the high vectors address (0xFFFF0000), - * thus only the low address (0x00000000) is useable; but that is - * in ROM, so let's avoid relocating the vectors. - */ - .section .text.relocate_vectors,"ax",%progbits - -ENTRY(relocate_vectors) - - bx lr - -ENDPROC(relocate_vectors) diff --git a/arch/arm/cpu/arm926ejs/mx25/reset.c b/arch/arm/cpu/arm926ejs/mx25/reset.c deleted file mode 100644 index 7844a99c16..0000000000 --- a/arch/arm/cpu/arm926ejs/mx25/reset.c +++ /dev/null @@ -1,40 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Alex Zuepke - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * (C) Copyright 2009 - * Ilya Yanok, Emcraft Systems Ltd, - */ - -#include -#include -#include -#include - -/* - * Reset the cpu by setting up the watchdog timer and let it time out - */ -void reset_cpu(void) -{ - struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE; - /* Disable watchdog and set Time-Out field to 0 */ - writew(0, ®s->wcr); - - /* Write Service Sequence */ - writew(WSR_UNLOCK1, ®s->wsr); - writew(WSR_UNLOCK2, ®s->wsr); - - /* Enable watchdog */ - writew(WCR_WDE, ®s->wcr); - - while (1) ; -} diff --git a/arch/arm/cpu/arm926ejs/mx25/timer.c b/arch/arm/cpu/arm926ejs/mx25/timer.c deleted file mode 100644 index 4b726d5c73..0000000000 --- a/arch/arm/cpu/arm926ejs/mx25/timer.c +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Alex Zuepke - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * (C) Copyright 2009 - * Ilya Yanok, Emcraft Systems Ltd, - * - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby - * Add support for MX25 - */ - -#include -#include -#include -#include -#include - -/* nothing really to do with interrupts, just starts up a counter. */ -/* The 32KHz 32-bit timer overruns in 134217 seconds */ -int timer_init(void) -{ - int i; - struct gpt_regs *gpt = (struct gpt_regs *)IMX_GPT1_BASE; - struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; - - /* setup GP Timer 1 */ - writel(GPT_CTRL_SWR, &gpt->ctrl); - - writel(readl(&ccm->cgr1) | CCM_CGR1_GPT1, &ccm->cgr1); - - for (i = 0; i < 100; i++) - writel(0, &gpt->ctrl); /* We have no udelay by now */ - writel(0, &gpt->pre); /* prescaler = 1 */ - /* Freerun Mode, 32KHz input */ - writel(readl(&gpt->ctrl) | GPT_CTRL_CLKSOURCE_32 | GPT_CTRL_FRR, - &gpt->ctrl); - writel(readl(&gpt->ctrl) | GPT_CTRL_TEN, &gpt->ctrl); - - return 0; -} diff --git a/arch/arm/include/asm/arch-mx25/clock.h b/arch/arm/include/asm/arch-mx25/clock.h deleted file mode 100644 index 3045b78d08..0000000000 --- a/arch/arm/include/asm/arch-mx25/clock.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * - * (c) 2009 Ilya Yanok, Emcraft Systems - * - * Modified for mx25 by John Rigby - */ - -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H - -#ifdef CONFIG_MX25_HCLK_FREQ -#define MXC_HCLK CONFIG_MX25_HCLK_FREQ -#else -#define MXC_HCLK 24000000 -#endif - -#ifdef CONFIG_MX25_CLK32 -#define MXC_CLK32 CONFIG_MX25_CLK32 -#else -#define MXC_CLK32 32768 -#endif - -enum mxc_clock { - /* PER clocks (do not change order) */ - MXC_CSI_CLK, - MXC_EPIT_CLK, - MXC_ESAI_CLK, - MXC_ESDHC1_CLK, - MXC_ESDHC2_CLK, - MXC_GPT_CLK, - MXC_I2C_CLK, - MXC_LCDC_CLK, - MXC_NFC_CLK, - MXC_OWIRE_CLK, - MXC_PWM_CLK, - MXC_SIM1_CLK, - MXC_SIM2_CLK, - MXC_SSI1_CLK, - MXC_SSI2_CLK, - MXC_UART_CLK, - /* Other clocks */ - MXC_ARM_CLK, - MXC_AHB_CLK, - MXC_IPG_CLK, - MXC_CSPI_CLK, - MXC_FEC_CLK, - MXC_CLK_NUM -}; - -int imx_set_perclk(enum mxc_clock clk, bool from_upll, unsigned int freq); -unsigned int mxc_get_clock(enum mxc_clock clk); - -#define imx_get_uartclk() mxc_get_clock(MXC_UART_CLK) -#define imx_get_fecclk() mxc_get_clock(MXC_FEC_CLK) - -#endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx25/gpio.h b/arch/arm/include/asm/arch-mx25/gpio.h deleted file mode 100644 index 1205695ce0..0000000000 --- a/arch/arm/include/asm/arch-mx25/gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 - * Stefano Babic, DENX Software Engineering, - */ - - -#ifndef __ASM_ARCH_MX25_GPIO_H -#define __ASM_ARCH_MX25_GPIO_H - -#include - -#endif diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h deleted file mode 100644 index d5ea868c45..0000000000 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ /dev/null @@ -1,504 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2009, DENX Software Engineering - * Author: John Rigby - * and arch-mx27/imx-regs.h - * Copyright (C) 2007 Pengutronix, - * Sascha Hauer - * Copyright (C) 2009 Ilya Yanok, - * Emcraft Systems - */ - -#ifndef _IMX_REGS_H -#define _IMX_REGS_H - -#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) -#include - -/* Clock Control Module (CCM) registers */ -struct ccm_regs { - u32 mpctl; /* Core PLL Control */ - u32 upctl; /* USB PLL Control */ - u32 cctl; /* Clock Control */ - u32 cgr0; /* Clock Gating Control 0 */ - u32 cgr1; /* Clock Gating Control 1 */ - u32 cgr2; /* Clock Gating Control 2 */ - u32 pcdr[4]; /* PER Clock Dividers */ - u32 rcsr; /* CCM Status */ - u32 crdr; /* CCM Reset and Debug */ - u32 dcvr0; /* DPTC Comparator Value 0 */ - u32 dcvr1; /* DPTC Comparator Value 1 */ - u32 dcvr2; /* DPTC Comparator Value 2 */ - u32 dcvr3; /* DPTC Comparator Value 3 */ - u32 ltr0; /* Load Tracking 0 */ - u32 ltr1; /* Load Tracking 1 */ - u32 ltr2; /* Load Tracking 2 */ - u32 ltr3; /* Load Tracking 3 */ - u32 ltbr0; /* Load Tracking Buffer 0 */ - u32 ltbr1; /* Load Tracking Buffer 1 */ - u32 pcmr0; /* Power Management Control 0 */ - u32 pcmr1; /* Power Management Control 1 */ - u32 pcmr2; /* Power Management Control 2 */ - u32 mcr; /* Miscellaneous Control */ - u32 lpimr0; /* Low Power Interrupt Mask 0 */ - u32 lpimr1; /* Low Power Interrupt Mask 1 */ -}; - -/* Enhanced SDRAM Controller (ESDRAMC) registers */ -struct esdramc_regs { - u32 ctl0; /* control 0 */ - u32 cfg0; /* configuration 0 */ - u32 ctl1; /* control 1 */ - u32 cfg1; /* configuration 1 */ - u32 misc; /* miscellaneous */ - u32 pad[3]; - u32 cdly1; /* Delay Line 1 configuration debug */ - u32 cdly2; /* delay line 2 configuration debug */ - u32 cdly3; /* delay line 3 configuration debug */ - u32 cdly4; /* delay line 4 configuration debug */ - u32 cdly5; /* delay line 5 configuration debug */ - u32 cdlyl; /* delay line cycle length debug */ -}; - -/* General Purpose Timer (GPT) registers */ -struct gpt_regs { - u32 ctrl; /* control */ - u32 pre; /* prescaler */ - u32 stat; /* status */ - u32 intr; /* interrupt */ - u32 cmp[3]; /* output compare 1-3 */ - u32 capt[2]; /* input capture 1-2 */ - u32 counter; /* counter */ -}; - -/* Watchdog Timer (WDOG) registers */ -struct wdog_regs { - u16 wcr; /* Control */ - u16 wsr; /* Service */ - u16 wrsr; /* Reset Status */ - u16 wicr; /* Interrupt Control */ - u16 wmcr; /* Misc Control */ -}; - -/* IIM control registers */ -struct iim_regs { - u32 iim_stat; - u32 iim_statm; - u32 iim_err; - u32 iim_emask; - u32 iim_fctl; - u32 iim_ua; - u32 iim_la; - u32 iim_sdat; - u32 iim_prev; - u32 iim_srev; - u32 iim_prg_p; - u32 iim_scs0; - u32 iim_scs1; - u32 iim_scs2; - u32 iim_scs3; - u32 res1[0x1f1]; - struct fuse_bank { - u32 fuse_regs[0x20]; - u32 fuse_rsvd[0xe0]; - } bank[3]; -}; - -struct fuse_bank0_regs { - u32 fuse0_7[8]; - u32 uid[8]; - u32 fuse16_25[0xa]; - u32 mac_addr[6]; -}; - -struct fuse_bank1_regs { - u32 fuse0_21[0x16]; - u32 usr5; - u32 fuse23_29[7]; - u32 usr6[2]; -}; - -/* Multi-Layer AHB Crossbar Switch (MAX) registers */ -struct max_regs { - u32 mpr0; - u32 pad00[3]; - u32 sgpcr0; - u32 pad01[59]; - u32 mpr1; - u32 pad02[3]; - u32 sgpcr1; - u32 pad03[59]; - u32 mpr2; - u32 pad04[3]; - u32 sgpcr2; - u32 pad05[59]; - u32 mpr3; - u32 pad06[3]; - u32 sgpcr3; - u32 pad07[59]; - u32 mpr4; - u32 pad08[3]; - u32 sgpcr4; - u32 pad09[251]; - u32 mgpcr0; - u32 pad10[63]; - u32 mgpcr1; - u32 pad11[63]; - u32 mgpcr2; - u32 pad12[63]; - u32 mgpcr3; - u32 pad13[63]; - u32 mgpcr4; -}; - -/* AHB <-> IP-Bus Interface (AIPS) */ -struct aips_regs { - u32 mpr_0_7; - u32 mpr_8_15; -}; -/* LCD controller registers */ -struct lcdc_regs { - u32 lssar; /* Screen Start Address */ - u32 lsr; /* Size */ - u32 lvpwr; /* Virtual Page Width */ - u32 lcpr; /* Cursor Position */ - u32 lcwhb; /* Cursor Width Height and Blink */ - u32 lccmr; /* Color Cursor Mapping */ - u32 lpcr; /* Panel Configuration */ - u32 lhcr; /* Horizontal Configuration */ - u32 lvcr; /* Vertical Configuration */ - u32 lpor; /* Panning Offset */ - u32 lscr; /* Sharp Configuration */ - u32 lpccr; /* PWM Contrast Control */ - u32 ldcr; /* DMA Control */ - u32 lrmcr; /* Refresh Mode Control */ - u32 licr; /* Interrupt Configuration */ - u32 lier; /* Interrupt Enable */ - u32 lisr; /* Interrupt Status */ - u32 res0[3]; - u32 lgwsar; /* Graphic Window Start Address */ - u32 lgwsr; /* Graphic Window Size */ - u32 lgwvpwr; /* Graphic Window Virtual Page Width Regist */ - u32 lgwpor; /* Graphic Window Panning Offset */ - u32 lgwpr; /* Graphic Window Position */ - u32 lgwcr; /* Graphic Window Control */ - u32 lgwdcr; /* Graphic Window DMA Control */ - u32 res1[5]; - u32 lauscr; /* AUS Mode Control */ - u32 lausccr; /* AUS mode Cursor Control */ - u32 res2[31 + 64*7]; - u32 bglut; /* Background Lookup Table */ - u32 gwlut; /* Graphic Window Lookup Table */ -}; - -/* Wireless External Interface Module Registers */ -struct weim_regs { - u32 cscr0u; /* Chip Select 0 Upper Register */ - u32 cscr0l; /* Chip Select 0 Lower Register */ - u32 cscr0a; /* Chip Select 0 Addition Register */ - u32 pad0; - u32 cscr1u; /* Chip Select 1 Upper Register */ - u32 cscr1l; /* Chip Select 1 Lower Register */ - u32 cscr1a; /* Chip Select 1 Addition Register */ - u32 pad1; - u32 cscr2u; /* Chip Select 2 Upper Register */ - u32 cscr2l; /* Chip Select 2 Lower Register */ - u32 cscr2a; /* Chip Select 2 Addition Register */ - u32 pad2; - u32 cscr3u; /* Chip Select 3 Upper Register */ - u32 cscr3l; /* Chip Select 3 Lower Register */ - u32 cscr3a; /* Chip Select 3 Addition Register */ - u32 pad3; - u32 cscr4u; /* Chip Select 4 Upper Register */ - u32 cscr4l; /* Chip Select 4 Lower Register */ - u32 cscr4a; /* Chip Select 4 Addition Register */ - u32 pad4; - u32 cscr5u; /* Chip Select 5 Upper Register */ - u32 cscr5l; /* Chip Select 5 Lower Register */ - u32 cscr5a; /* Chip Select 5 Addition Register */ - u32 pad5; - u32 wcr; /* WEIM Configuration Register */ -}; - -/* Multi-Master Memory Interface */ -struct m3if_regs { - u32 ctl; /* Control Register */ - u32 wcfg0; /* Watermark Configuration Register 0 */ - u32 wcfg1; /* Watermark Configuration Register1 */ - u32 wcfg2; /* Watermark Configuration Register2 */ - u32 wcfg3; /* Watermark Configuration Register 3 */ - u32 wcfg4; /* Watermark Configuration Register 4 */ - u32 wcfg5; /* Watermark Configuration Register 5 */ - u32 wcfg6; /* Watermark Configuration Register 6 */ - u32 wcfg7; /* Watermark Configuration Register 7 */ - u32 wcsr; /* Watermark Control and Status Register */ - u32 scfg0; /* Snooping Configuration Register 0 */ - u32 scfg1; /* Snooping Configuration Register 1 */ - u32 scfg2; /* Snooping Configuration Register 2 */ - u32 ssr0; /* Snooping Status Register 0 */ - u32 ssr1; /* Snooping Status Register 1 */ - u32 res0; - u32 mlwe0; /* Master Lock WEIM CS0 Register */ - u32 mlwe1; /* Master Lock WEIM CS1 Register */ - u32 mlwe2; /* Master Lock WEIM CS2 Register */ - u32 mlwe3; /* Master Lock WEIM CS3 Register */ - u32 mlwe4; /* Master Lock WEIM CS4 Register */ - u32 mlwe5; /* Master Lock WEIM CS5 Register */ -}; - -/* Pulse width modulation */ -struct pwm_regs { - u32 cr; /* Control Register */ - u32 sr; /* Status Register */ - u32 ir; /* Interrupt Register */ - u32 sar; /* Sample Register */ - u32 pr; /* Period Register */ - u32 cnr; /* Counter Register */ -}; - -/* Enhanced Periodic Interrupt Timer */ -struct epit_regs { - u32 cr; /* Control register */ - u32 sr; /* Status register */ - u32 lr; /* Load register */ - u32 cmpr; /* Compare register */ - u32 cnr; /* Counter register */ -}; - -#endif - -#define ARCH_MXC - -/* AIPS 1 */ -#define IMX_AIPS1_BASE (0x43F00000) -#define IMX_MAX_BASE (0x43F04000) -#define IMX_CLKCTL_BASE (0x43F08000) -#define IMX_ETB_SLOT4_BASE (0x43F0C000) -#define IMX_ETB_SLOT5_BASE (0x43F10000) -#define IMX_ECT_CTIO_BASE (0x43F18000) -#define I2C1_BASE_ADDR (0x43F80000) -#define I2C3_BASE_ADDR (0x43F84000) -#define IMX_CAN1_BASE (0x43F88000) -#define IMX_CAN2_BASE (0x43F8C000) -#define UART1_BASE (0x43F90000) -#define UART2_BASE (0x43F94000) -#define I2C2_BASE_ADDR (0x43F98000) -#define IMX_OWIRE_BASE (0x43F9C000) -#define IMX_CSPI1_BASE (0x43FA4000) -#define IMX_KPP_BASE (0x43FA8000) -#define IMX_IOPADMUX_BASE (0x43FAC000) -#define IOMUXC_BASE_ADDR IMX_IOPADMUX_BASE -#define IMX_IOPADCTL_BASE (0x43FAC22C) -#define IMX_IOPADGRPCTL_BASE (0x43FAC418) -#define IMX_IOPADINPUTSEL_BASE (0x43FAC460) -#define IMX_AUDMUX_BASE (0x43FB0000) -#define IMX_ECT_IP1_BASE (0x43FB8000) -#define IMX_ECT_IP2_BASE (0x43FBC000) - -/* SPBA */ -#define IMX_SPBA_BASE (0x50000000) -#define IMX_CSPI3_BASE (0x50004000) -#define UART4_BASE (0x50008000) -#define UART3_BASE (0x5000C000) -#define IMX_CSPI2_BASE (0x50010000) -#define IMX_SSI2_BASE (0x50014000) -#define IMX_ESAI_BASE (0x50018000) -#define IMX_ATA_DMA_BASE (0x50020000) -#define IMX_SIM1_BASE (0x50024000) -#define IMX_SIM2_BASE (0x50028000) -#define UART5_BASE (0x5002C000) -#define IMX_TSC_BASE (0x50030000) -#define IMX_SSI1_BASE (0x50034000) -#define IMX_FEC_BASE (0x50038000) -#define IMX_SPBA_CTRL_BASE (0x5003C000) - -/* AIPS 2 */ -#define IMX_AIPS2_BASE (0x53F00000) -#define IMX_CCM_BASE (0x53F80000) -#define IMX_GPT4_BASE (0x53F84000) -#define IMX_GPT3_BASE (0x53F88000) -#define IMX_GPT2_BASE (0x53F8C000) -#define IMX_GPT1_BASE (0x53F90000) -#define IMX_EPIT1_BASE (0x53F94000) -#define IMX_EPIT2_BASE (0x53F98000) -#define IMX_GPIO4_BASE (0x53F9C000) -#define IMX_PWM2_BASE (0x53FA0000) -#define IMX_GPIO3_BASE (0x53FA4000) -#define IMX_PWM3_BASE (0x53FA8000) -#define IMX_SCC_BASE (0x53FAC000) -#define IMX_SCM_BASE (0x53FAE000) -#define IMX_SMN_BASE (0x53FAF000) -#define IMX_RNGD_BASE (0x53FB0000) -#define IMX_MMC_SDHC1_BASE (0x53FB4000) -#define IMX_MMC_SDHC2_BASE (0x53FB8000) -#define IMX_LCDC_BASE (0x53FBC000) -#define IMX_SLCDC_BASE (0x53FC0000) -#define IMX_PWM4_BASE (0x53FC8000) -#define IMX_GPIO1_BASE (0x53FCC000) -#define IMX_GPIO2_BASE (0x53FD0000) -#define IMX_SDMA_BASE (0x53FD4000) -#define IMX_WDT_BASE (0x53FDC000) -#define WDOG1_BASE_ADDR IMX_WDT_BASE -#define IMX_PWM1_BASE (0x53FE0000) -#define IMX_RTIC_BASE (0x53FEC000) -#define IMX_IIM_BASE (0x53FF0000) -#define IIM_BASE_ADDR IMX_IIM_BASE -#define IMX_USB_BASE (0x53FF4000) -/* - * This is in contradiction to the imx25 reference manual, which says that - * port 1's registers start at 0x53FF4200. The correct base address for - * port 1 is 0x53FF4400. The kernel uses 0x53FF4400 as well. - */ -#define IMX_USB_PORT_OFFSET 0x400 -#define IMX_CSI_BASE (0x53FF8000) -#define IMX_DRYICE_BASE (0x53FFC000) - -#define IMX_ARM926_ROMPATCH (0x60000000) -#define IMX_ARM926_ASIC (0x68000000) - -/* 128K Internal Static RAM */ -#define IMX_RAM_BASE (0x78000000) -#define IMX_RAM_SIZE (128 * 1024) - -/* SDRAM BANKS */ -#define IMX_SDRAM_BANK0_BASE (0x80000000) -#define IMX_SDRAM_BANK1_BASE (0x90000000) - -#define IMX_WEIM_CS0 (0xA0000000) -#define IMX_WEIM_CS1 (0xA8000000) -#define IMX_WEIM_CS2 (0xB0000000) -#define IMX_WEIM_CS3 (0xB2000000) -#define IMX_WEIM_CS4 (0xB4000000) -#define IMX_ESDRAMC_BASE (0xB8001000) -#define IMX_WEIM_CTRL_BASE (0xB8002000) -#define IMX_M3IF_CTRL_BASE (0xB8003000) -#define IMX_EMI_CTRL_BASE (0xB8004000) - -/* NAND Flash Controller */ -#define IMX_NFC_BASE (0xBB000000) -#define NFC_BASE_ADDR IMX_NFC_BASE - -/* CCM bitfields */ -#define CCM_PLL_MFI_SHIFT 10 -#define CCM_PLL_MFI_MASK 0xf -#define CCM_PLL_MFN_SHIFT 0 -#define CCM_PLL_MFN_MASK 0x3ff -#define CCM_PLL_MFD_SHIFT 16 -#define CCM_PLL_MFD_MASK 0x3ff -#define CCM_PLL_PD_SHIFT 26 -#define CCM_PLL_PD_MASK 0xf -#define CCM_CCTL_ARM_DIV_SHIFT 30 -#define CCM_CCTL_ARM_DIV_MASK 3 -#define CCM_CCTL_AHB_DIV_SHIFT 28 -#define CCM_CCTL_AHB_DIV_MASK 3 -#define CCM_CCTL_ARM_SRC (1 << 14) -#define CCM_CGR1_GPT1 (1 << 19) -#define CCM_PERCLK_REG(clk) (clk / 4) -#define CCM_PERCLK_SHIFT(clk) (8 * (clk % 4)) -#define CCM_PERCLK_MASK 0x3f -#define CCM_RCSR_NF_16BIT_SEL (1 << 14) -#define CCM_RCSR_NF_PS(v) ((v >> 26) & 3) -#define CCM_CRDR_BT_UART_SRC_SHIFT 29 -#define CCM_CRDR_BT_UART_SRC_MASK 7 - -/* ESDRAM Controller register bitfields */ -#define ESDCTL_PRCT(x) (((x) & 0x3f) << 0) -#define ESDCTL_BL (1 << 7) -#define ESDCTL_FP (1 << 8) -#define ESDCTL_PWDT(x) (((x) & 3) << 10) -#define ESDCTL_SREFR(x) (((x) & 7) << 13) -#define ESDCTL_DSIZ_16_UPPER (0 << 16) -#define ESDCTL_DSIZ_16_LOWER (1 << 16) -#define ESDCTL_DSIZ_32 (2 << 16) -#define ESDCTL_COL8 (0 << 20) -#define ESDCTL_COL9 (1 << 20) -#define ESDCTL_COL10 (2 << 20) -#define ESDCTL_ROW11 (0 << 24) -#define ESDCTL_ROW12 (1 << 24) -#define ESDCTL_ROW13 (2 << 24) -#define ESDCTL_ROW14 (3 << 24) -#define ESDCTL_ROW15 (4 << 24) -#define ESDCTL_SP (1 << 27) -#define ESDCTL_SMODE_NORMAL (0 << 28) -#define ESDCTL_SMODE_PRECHARGE (1 << 28) -#define ESDCTL_SMODE_AUTO_REF (2 << 28) -#define ESDCTL_SMODE_LOAD_MODE (3 << 28) -#define ESDCTL_SMODE_MAN_REF (4 << 28) -#define ESDCTL_SDE (1 << 31) - -#define ESDCFG_TRC(x) (((x) & 0xf) << 0) -#define ESDCFG_TRCD(x) (((x) & 0x7) << 4) -#define ESDCFG_TCAS(x) (((x) & 0x3) << 8) -#define ESDCFG_TRRD(x) (((x) & 0x3) << 10) -#define ESDCFG_TRAS(x) (((x) & 0x7) << 12) -#define ESDCFG_TWR (1 << 15) -#define ESDCFG_TMRD(x) (((x) & 0x3) << 16) -#define ESDCFG_TRP(x) (((x) & 0x3) << 18) -#define ESDCFG_TWTR (1 << 20) -#define ESDCFG_TXP(x) (((x) & 0x3) << 21) - -#define ESDMISC_RST (1 << 1) -#define ESDMISC_MDDREN (1 << 2) -#define ESDMISC_MDDR_DL_RST (1 << 3) -#define ESDMISC_MDDR_MDIS (1 << 4) -#define ESDMISC_LHD (1 << 5) -#define ESDMISC_MA10_SHARE (1 << 6) -#define ESDMISC_SDRAM_RDY (1 << 31) - -/* GPT bits */ -#define GPT_CTRL_SWR (1 << 15) /* Software reset */ -#define GPT_CTRL_FRR (1 << 9) /* Freerun / restart */ -#define GPT_CTRL_CLKSOURCE_32 (4 << 6) /* Clock source */ -#define GPT_CTRL_TEN 1 /* Timer enable */ - -/* WDOG enable */ -#define WCR_WDE 0x04 -#define WSR_UNLOCK1 0x5555 -#define WSR_UNLOCK2 0xAAAA - -/* MAX bits */ -#define MAX_MGPCR_AULB(x) (((x) & 0x7) << 0) - -/* M3IF bits */ -#define M3IF_CTL_MRRP(x) (((x) & 0xff) << 0) - -/* WEIM bits */ -/* 13 fields of the upper CS control register */ -#define WEIM_CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \ - cnc, wsc, ew, wws, edc) \ - ((sp) << 31 | (wp) << 30 | (bcd) << 28 | (bcs) << 24 | \ - (psz) << 22 | (pme) << 21 | (sync) << 20 | (dol) << 16 | \ - (cnc) << 14 | (wsc) << 8 | (ew) << 7 | (wws) << 4 | (edc) << 0) -/* 12 fields of the lower CS control register */ -#define WEIM_CSCR_L(oea, oen, ebwa, ebwn, \ - csa, ebc, dsz, csn, psr, cre, wrap, csen) \ - ((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\ - (csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\ - (psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0) -/* 14 fields of the additional CS control register */ -#define WEIM_CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \ - wwu, age, cnc2, fce) \ - ((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\ - (mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\ - (dww) << 6 | (dct) << 4 | (wwu) << 3 |\ - (age) << 2 | (cnc2) << 1 | (fce) << 0) - -/* Names used in GPIO driver */ -#define GPIO1_BASE_ADDR IMX_GPIO1_BASE -#define GPIO2_BASE_ADDR IMX_GPIO2_BASE -#define GPIO3_BASE_ADDR IMX_GPIO3_BASE -#define GPIO4_BASE_ADDR IMX_GPIO4_BASE - -/* - * CSPI register definitions - */ -#define MXC_SPI_BASE_ADDRESSES \ - IMX_CSPI1_BASE, \ - IMX_CSPI2_BASE, \ - IMX_CSPI3_BASE - -#endif /* _IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-mx25/iomux-mx25.h b/arch/arm/include/asm/arch-mx25/iomux-mx25.h deleted file mode 100644 index 1ce7a8586f..0000000000 --- a/arch/arm/include/asm/arch-mx25/iomux-mx25.h +++ /dev/null @@ -1,537 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013 ADVANSEE - * Benoît Thébaudeau - * - * Based on mainline Linux i.MX iomux-mx25.h file: - * Copyright (C) 2009 by Lothar Wassmann - * - * Based on Linux arch/arm/mach-mx25/mx25_pins.h: - * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. - * and Linux arch/arm/plat-mxc/include/mach/iomux-mx35.h: - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH - */ - -#ifndef __IOMUX_MX25_H__ -#define __IOMUX_MX25_H__ - -#include - -/* Pad control groupings */ -#define MX25_KPP_ROW_PAD_CTRL PAD_CTL_PUS_100K_UP -#define MX25_KPP_COL_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - -/* - * The naming convention for the pad modes is MX25_PAD___ - * If or refers to a GPIO, it is named GPIO__ - * See also iomux-v3.h - */ - -/* PAD MUX ALT INPSE PATH PADCTRL */ -enum { - MX25_PAD_A10__A10 = IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A10__GPIO_4_0 = IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A13__A13 = IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A13__GPIO_4_1 = IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A14__A14 = IOMUX_PAD(0x230, 0x010, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A14__GPIO_2_0 = IOMUX_PAD(0x230, 0x010, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A15__A15 = IOMUX_PAD(0x234, 0x014, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A15__GPIO_2_1 = IOMUX_PAD(0x234, 0x014, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A16__A16 = IOMUX_PAD(0x000, 0x018, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A16__GPIO_2_2 = IOMUX_PAD(0x000, 0x018, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A17__A17 = IOMUX_PAD(0x238, 0x01c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A17__GPIO_2_3 = IOMUX_PAD(0x238, 0x01c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A18__A18 = IOMUX_PAD(0x23c, 0x020, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A18__GPIO_2_4 = IOMUX_PAD(0x23c, 0x020, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_A18__FEC_COL = IOMUX_PAD(0x23c, 0x020, 0x07, 0x504, 0, NO_PAD_CTRL), - - MX25_PAD_A19__A19 = IOMUX_PAD(0x240, 0x024, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A19__FEC_RX_ER = IOMUX_PAD(0x240, 0x024, 0x07, 0x518, 0, NO_PAD_CTRL), - MX25_PAD_A19__GPIO_2_5 = IOMUX_PAD(0x240, 0x024, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A20__A20 = IOMUX_PAD(0x244, 0x028, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A20__GPIO_2_6 = IOMUX_PAD(0x244, 0x028, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_A20__FEC_RDATA2 = IOMUX_PAD(0x244, 0x028, 0x07, 0x50c, 0, NO_PAD_CTRL), - - MX25_PAD_A21__A21 = IOMUX_PAD(0x248, 0x02c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A21__GPIO_2_7 = IOMUX_PAD(0x248, 0x02c, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_A21__FEC_RDATA3 = IOMUX_PAD(0x248, 0x02c, 0x07, 0x510, 0, NO_PAD_CTRL), - - MX25_PAD_A22__A22 = IOMUX_PAD(0x000, 0x030, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A22__GPIO_2_8 = IOMUX_PAD(0x000, 0x030, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A23__A23 = IOMUX_PAD(0x24c, 0x034, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A23__GPIO_2_9 = IOMUX_PAD(0x24c, 0x034, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_A24__A24 = IOMUX_PAD(0x250, 0x038, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A24__GPIO_2_10 = IOMUX_PAD(0x250, 0x038, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_A24__FEC_RX_CLK = IOMUX_PAD(0x250, 0x038, 0x07, 0x514, 0, NO_PAD_CTRL), - - MX25_PAD_A25__A25 = IOMUX_PAD(0x254, 0x03c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_A25__GPIO_2_11 = IOMUX_PAD(0x254, 0x03c, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_A25__FEC_CRS = IOMUX_PAD(0x254, 0x03c, 0x07, 0x508, 0, NO_PAD_CTRL), - - MX25_PAD_EB0__EB0 = IOMUX_PAD(0x258, 0x040, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_EB0__AUD4_TXD = IOMUX_PAD(0x258, 0x040, 0x04, 0x464, 0, NO_PAD_CTRL), - MX25_PAD_EB0__GPIO_2_12 = IOMUX_PAD(0x258, 0x040, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_EB1__EB1 = IOMUX_PAD(0x25c, 0x044, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_EB1__AUD4_RXD = IOMUX_PAD(0x25c, 0x044, 0x04, 0x460, 0, NO_PAD_CTRL), - MX25_PAD_EB1__GPIO_2_13 = IOMUX_PAD(0x25c, 0x044, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_OE__OE = IOMUX_PAD(0x260, 0x048, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_OE__AUD4_TXC = IOMUX_PAD(0x260, 0x048, 0x04, 0, 0, NO_PAD_CTRL), - MX25_PAD_OE__GPIO_2_14 = IOMUX_PAD(0x260, 0x048, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CS0__CS0 = IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS0__GPIO_4_2 = IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CS1__CS1 = IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS1__NF_CE3 = IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS1__GPIO_4_3 = IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CS4__CS4 = IOMUX_PAD(0x264, 0x054, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS4__NF_CE1 = IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS4__UART5_CTS = IOMUX_PAD(0x264, 0x054, 0x03, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS4__GPIO_3_20 = IOMUX_PAD(0x264, 0x054, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CS5__CS5 = IOMUX_PAD(0x268, 0x058, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS5__NF_CE2 = IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL), - MX25_PAD_CS5__UART5_RTS = IOMUX_PAD(0x268, 0x058, 0x03, 0x574, 0, NO_PAD_CTRL), - MX25_PAD_CS5__GPIO_3_21 = IOMUX_PAD(0x268, 0x058, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_NF_CE0__NF_CE0 = IOMUX_PAD(0x26c, 0x05c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_NF_CE0__GPIO_3_22 = IOMUX_PAD(0x26c, 0x05c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_ECB__ECB = IOMUX_PAD(0x270, 0x060, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_ECB__UART5_TXD_MUX = IOMUX_PAD(0x270, 0x060, 0x03, 0, 0, NO_PAD_CTRL), - MX25_PAD_ECB__GPIO_3_23 = IOMUX_PAD(0x270, 0x060, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LBA__LBA = IOMUX_PAD(0x274, 0x064, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_LBA__UART5_RXD_MUX = IOMUX_PAD(0x274, 0x064, 0x03, 0x578, 0, NO_PAD_CTRL), - MX25_PAD_LBA__GPIO_3_24 = IOMUX_PAD(0x274, 0x064, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_BCLK__BCLK = IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_BCLK__GPIO_4_4 = IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_RW__RW = IOMUX_PAD(0x278, 0x06c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_RW__AUD4_TXFS = IOMUX_PAD(0x278, 0x06c, 0x04, 0x474, 0, NO_PAD_CTRL), - MX25_PAD_RW__GPIO_3_25 = IOMUX_PAD(0x278, 0x06c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_NFWE_B__NFWE_B = IOMUX_PAD(0x000, 0x070, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_NFWE_B__GPIO_3_26 = IOMUX_PAD(0x000, 0x070, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_NFRE_B__NFRE_B = IOMUX_PAD(0x000, 0x074, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_NFRE_B__GPIO_3_27 = IOMUX_PAD(0x000, 0x074, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_NFALE__NFALE = IOMUX_PAD(0x000, 0x078, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_NFALE__GPIO_3_28 = IOMUX_PAD(0x000, 0x078, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_NFCLE__NFCLE = IOMUX_PAD(0x000, 0x07c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_NFCLE__GPIO_3_29 = IOMUX_PAD(0x000, 0x07c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_NFWP_B__NFWP_B = IOMUX_PAD(0x000, 0x080, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_NFWP_B__GPIO_3_30 = IOMUX_PAD(0x000, 0x080, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_NFRB__NFRB = IOMUX_PAD(0x27c, 0x084, 0x00, 0, 0, PAD_CTL_PKE), - MX25_PAD_NFRB__GPIO_3_31 = IOMUX_PAD(0x27c, 0x084, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D15__D15 = IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D15__LD16 = IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_D15__GPIO_4_5 = IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D14__D14 = IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D14__LD17 = IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_D14__GPIO_4_6 = IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D13__D13 = IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D13__LD18 = IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_D13__GPIO_4_7 = IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D12__D12 = IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D12__GPIO_4_8 = IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D11__D11 = IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D11__GPIO_4_9 = IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D10__D10 = IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D10__GPIO_4_10 = IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_D10__USBOTG_OC = IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP), - - MX25_PAD_D9__D9 = IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D9__GPIO_4_11 = IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_D9__USBH2_PWR = IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE), - - MX25_PAD_D8__D8 = IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D8__GPIO_4_12 = IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_D8__USBH2_OC = IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP), - - MX25_PAD_D7__D7 = IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D7__GPIO_4_13 = IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D6__D6 = IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D6__GPIO_4_14 = IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D5__D5 = IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D5__GPIO_4_15 = IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D4__D4 = IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D4__GPIO_4_16 = IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D3__D3 = IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D3__GPIO_4_17 = IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D2__D2 = IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D2__GPIO_4_18 = IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D1__D1 = IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D1__GPIO_4_19 = IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_D0__D0 = IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_D0__GPIO_4_20 = IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD0__LD0 = IOMUX_PAD(0x2c0, 0x0c8, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD0__CSI_D0 = IOMUX_PAD(0x2c0, 0x0c8, 0x02, 0x488, 0, NO_PAD_CTRL), - MX25_PAD_LD0__GPIO_2_15 = IOMUX_PAD(0x2c0, 0x0c8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD1__LD1 = IOMUX_PAD(0x2c4, 0x0cc, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD1__CSI_D1 = IOMUX_PAD(0x2c4, 0x0cc, 0x02, 0x48c, 0, NO_PAD_CTRL), - MX25_PAD_LD1__GPIO_2_16 = IOMUX_PAD(0x2c4, 0x0cc, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD2__LD2 = IOMUX_PAD(0x2c8, 0x0d0, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD2__GPIO_2_17 = IOMUX_PAD(0x2c8, 0x0d0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD3__LD3 = IOMUX_PAD(0x2cc, 0x0d4, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD3__GPIO_2_18 = IOMUX_PAD(0x2cc, 0x0d4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD4__LD4 = IOMUX_PAD(0x2d0, 0x0d8, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD4__GPIO_2_19 = IOMUX_PAD(0x2d0, 0x0d8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD5__LD5 = IOMUX_PAD(0x2d4, 0x0dc, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD5__GPIO_1_19 = IOMUX_PAD(0x2d4, 0x0dc, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD6__LD6 = IOMUX_PAD(0x2d8, 0x0e0, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD6__GPIO_1_20 = IOMUX_PAD(0x2d8, 0x0e0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD7__LD7 = IOMUX_PAD(0x2dc, 0x0e4, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD7__GPIO_1_21 = IOMUX_PAD(0x2dc, 0x0e4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD8__LD8 = IOMUX_PAD(0x2e0, 0x0e8, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD8__FEC_TX_ERR = IOMUX_PAD(0x2e0, 0x0e8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD9__LD9 = IOMUX_PAD(0x2e4, 0x0ec, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD9__FEC_COL = IOMUX_PAD(0x2e4, 0x0ec, 0x05, 0x504, 1, NO_PAD_CTRL), - - MX25_PAD_LD10__LD10 = IOMUX_PAD(0x2e8, 0x0f0, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD10__FEC_RX_ER = IOMUX_PAD(0x2e8, 0x0f0, 0x05, 0x518, 1, NO_PAD_CTRL), - - MX25_PAD_LD11__LD11 = IOMUX_PAD(0x2ec, 0x0f4, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD11__FEC_RDATA2 = IOMUX_PAD(0x2ec, 0x0f4, 0x05, 0x50c, 1, NO_PAD_CTRL), - - MX25_PAD_LD12__LD12 = IOMUX_PAD(0x2f0, 0x0f8, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD12__FEC_RDATA3 = IOMUX_PAD(0x2f0, 0x0f8, 0x05, 0x510, 1, NO_PAD_CTRL), - - MX25_PAD_LD13__LD13 = IOMUX_PAD(0x2f4, 0x0fc, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD13__FEC_TDATA2 = IOMUX_PAD(0x2f4, 0x0fc, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD14__LD14 = IOMUX_PAD(0x2f8, 0x100, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD14__FEC_TDATA3 = IOMUX_PAD(0x2f8, 0x100, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LD15__LD15 = IOMUX_PAD(0x2fc, 0x104, 0x00, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_LD15__FEC_RX_CLK = IOMUX_PAD(0x2fc, 0x104, 0x05, 0x514, 1, NO_PAD_CTRL), - - MX25_PAD_HSYNC__HSYNC = IOMUX_PAD(0x300, 0x108, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_HSYNC__GPIO_1_22 = IOMUX_PAD(0x300, 0x108, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_VSYNC__VSYNC = IOMUX_PAD(0x304, 0x10c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_VSYNC__GPIO_1_23 = IOMUX_PAD(0x304, 0x10c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_LSCLK__LSCLK = IOMUX_PAD(0x308, 0x110, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_LSCLK__GPIO_1_24 = IOMUX_PAD(0x308, 0x110, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_OE_ACD__OE_ACD = IOMUX_PAD(0x30c, 0x114, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_OE_ACD__GPIO_1_25 = IOMUX_PAD(0x30c, 0x114, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CONTRAST__CONTRAST = IOMUX_PAD(0x310, 0x118, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CONTRAST__PWM4_PWMO = IOMUX_PAD(0x310, 0x118, 0x04, 0, 0, NO_PAD_CTRL), - MX25_PAD_CONTRAST__FEC_CRS = IOMUX_PAD(0x310, 0x118, 0x05, 0x508, 1, NO_PAD_CTRL), - - MX25_PAD_PWM__PWM = IOMUX_PAD(0x314, 0x11c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_PWM__GPIO_1_26 = IOMUX_PAD(0x314, 0x11c, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_PWM__USBH2_OC = IOMUX_PAD(0x314, 0x11c, 0x06, 0x580, 1, PAD_CTL_PUS_100K_UP), - - MX25_PAD_CSI_D2__CSI_D2 = IOMUX_PAD(0x318, 0x120, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D2__UART5_RXD_MUX = IOMUX_PAD(0x318, 0x120, 0x01, 0x578, 1, NO_PAD_CTRL), - MX25_PAD_CSI_D2__GPIO_1_27 = IOMUX_PAD(0x318, 0x120, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D2__CSPI3_MOSI = IOMUX_PAD(0x318, 0x120, 0x07, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_D3__CSI_D3 = IOMUX_PAD(0x31c, 0x124, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D3__GPIO_1_28 = IOMUX_PAD(0x31c, 0x124, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D3__CSPI3_MISO = IOMUX_PAD(0x31c, 0x124, 0x07, 0x4b4, 1, NO_PAD_CTRL), - - MX25_PAD_CSI_D4__CSI_D4 = IOMUX_PAD(0x320, 0x128, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D4__UART5_RTS = IOMUX_PAD(0x320, 0x128, 0x01, 0x574, 1, NO_PAD_CTRL), - MX25_PAD_CSI_D4__GPIO_1_29 = IOMUX_PAD(0x320, 0x128, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D4__CSPI3_SCLK = IOMUX_PAD(0x320, 0x128, 0x07, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_D5__CSI_D5 = IOMUX_PAD(0x324, 0x12c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D5__GPIO_1_30 = IOMUX_PAD(0x324, 0x12c, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D5__CSPI3_RDY = IOMUX_PAD(0x324, 0x12c, 0x07, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_D6__CSI_D6 = IOMUX_PAD(0x328, 0x130, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D6__GPIO_1_31 = IOMUX_PAD(0x328, 0x130, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_D7__CSI_D7 = IOMUX_PAD(0x32c, 0x134, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D7__GPIO_1_6 = IOMUX_PAD(0x32c, 0x134, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_D8__CSI_D8 = IOMUX_PAD(0x330, 0x138, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D8__GPIO_1_7 = IOMUX_PAD(0x330, 0x138, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_D9__CSI_D9 = IOMUX_PAD(0x334, 0x13c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_D9__GPIO_4_21 = IOMUX_PAD(0x334, 0x13c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_MCLK__CSI_MCLK = IOMUX_PAD(0x338, 0x140, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_MCLK__GPIO_1_8 = IOMUX_PAD(0x338, 0x140, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_VSYNC__CSI_VSYNC = IOMUX_PAD(0x33c, 0x144, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_VSYNC__GPIO_1_9 = IOMUX_PAD(0x33c, 0x144, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_HSYNC__CSI_HSYNC = IOMUX_PAD(0x340, 0x148, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_HSYNC__GPIO_1_10 = IOMUX_PAD(0x340, 0x148, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSI_PIXCLK__CSI_PIXCLK = IOMUX_PAD(0x344, 0x14c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSI_PIXCLK__GPIO_1_11 = IOMUX_PAD(0x344, 0x14c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_I2C1_CLK__I2C1_CLK = IOMUX_PAD(0x348, 0x150, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_I2C1_CLK__GPIO_1_12 = IOMUX_PAD(0x348, 0x150, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_I2C1_DAT__I2C1_DAT = IOMUX_PAD(0x34c, 0x154, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_I2C1_DAT__GPIO_1_13 = IOMUX_PAD(0x34c, 0x154, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSPI1_MOSI__CSPI1_MOSI = IOMUX_PAD(0x350, 0x158, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSPI1_MOSI__GPIO_1_14 = IOMUX_PAD(0x350, 0x158, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSPI1_MISO__CSPI1_MISO = IOMUX_PAD(0x354, 0x15c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSPI1_MISO__GPIO_1_15 = IOMUX_PAD(0x354, 0x15c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSPI1_SS0__CSPI1_SS0 = IOMUX_PAD(0x358, 0x160, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSPI1_SS0__GPIO_1_16 = IOMUX_PAD(0x358, 0x160, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSPI1_SS1__CSPI1_SS1 = IOMUX_PAD(0x35c, 0x164, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSPI1_SS1__I2C3_DAT = IOMUX_PAD(0x35c, 0x164, 0x01, 0x528, 1, NO_PAD_CTRL), - MX25_PAD_CSPI1_SS1__GPIO_1_17 = IOMUX_PAD(0x35c, 0x164, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSPI1_SCLK__CSPI1_SCLK = IOMUX_PAD(0x360, 0x168, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CSPI1_SCLK__GPIO_1_18 = IOMUX_PAD(0x360, 0x168, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CSPI1_RDY__CSPI1_RDY = IOMUX_PAD(0x364, 0x16c, 0x00, 0, 0, PAD_CTL_PKE), - MX25_PAD_CSPI1_RDY__GPIO_2_22 = IOMUX_PAD(0x364, 0x16c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x368, 0x170, 0x00, 0, 0, PAD_CTL_PUS_100K_DOWN), - MX25_PAD_UART1_RXD__GPIO_4_22 = IOMUX_PAD(0x368, 0x170, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x36c, 0x174, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_UART1_TXD__GPIO_4_23 = IOMUX_PAD(0x36c, 0x174, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x370, 0x178, 0x00, 0, 0, PAD_CTL_PUS_100K_UP), - MX25_PAD_UART1_RTS__CSI_D0 = IOMUX_PAD(0x370, 0x178, 0x01, 0x488, 1, NO_PAD_CTRL), - MX25_PAD_UART1_RTS__GPIO_4_24 = IOMUX_PAD(0x370, 0x178, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x374, 0x17c, 0x00, 0, 0, PAD_CTL_PUS_100K_UP), - MX25_PAD_UART1_CTS__CSI_D1 = IOMUX_PAD(0x374, 0x17c, 0x01, 0x48c, 1, NO_PAD_CTRL), - MX25_PAD_UART1_CTS__GPIO_4_25 = IOMUX_PAD(0x374, 0x17c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART2_RXD__UART2_RXD = IOMUX_PAD(0x378, 0x180, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_UART2_RXD__GPIO_4_26 = IOMUX_PAD(0x378, 0x180, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART2_TXD__UART2_TXD = IOMUX_PAD(0x37c, 0x184, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_UART2_TXD__GPIO_4_27 = IOMUX_PAD(0x37c, 0x184, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART2_RTS__UART2_RTS = IOMUX_PAD(0x380, 0x188, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_UART2_RTS__FEC_COL = IOMUX_PAD(0x380, 0x188, 0x02, 0x504, 2, NO_PAD_CTRL), - MX25_PAD_UART2_RTS__GPIO_4_28 = IOMUX_PAD(0x380, 0x188, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UART2_CTS__FEC_RX_ER = IOMUX_PAD(0x384, 0x18c, 0x02, 0x518, 2, NO_PAD_CTRL), - MX25_PAD_UART2_CTS__UART2_CTS = IOMUX_PAD(0x384, 0x18c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_UART2_CTS__GPIO_4_29 = IOMUX_PAD(0x384, 0x18c, 0x05, 0, 0, NO_PAD_CTRL), - - /* - * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD - * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM - * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon - * bug that configuring the SD1_CMD function doesn't enable the input path for - * this pin. - * This might have side effects for other hardware units that are connected to - * that pin and use the respective function as input. - */ - MX25_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP), - MX25_PAD_SD1_CMD__FEC_RDATA2 = IOMUX_PAD(0x388, 0x190, 0x02, 0x50c, 2, NO_PAD_CTRL), - MX25_PAD_SD1_CMD__GPIO_2_23 = IOMUX_PAD(0x388, 0x190, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x38c, 0x194, 0x00, 0, 0, PAD_CTL_PUS_47K_UP), - MX25_PAD_SD1_CLK__FEC_RDATA3 = IOMUX_PAD(0x38c, 0x194, 0x02, 0x510, 2, NO_PAD_CTRL), - MX25_PAD_SD1_CLK__GPIO_2_24 = IOMUX_PAD(0x38c, 0x194, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x390, 0x198, 0x00, 0, 0, PAD_CTL_PUS_47K_UP), - MX25_PAD_SD1_DATA0__GPIO_2_25 = IOMUX_PAD(0x390, 0x198, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x394, 0x19c, 0x00, 0, 0, PAD_CTL_PUS_47K_UP), - MX25_PAD_SD1_DATA1__AUD7_RXD = IOMUX_PAD(0x394, 0x19c, 0x03, 0x478, 0, NO_PAD_CTRL), - MX25_PAD_SD1_DATA1__GPIO_2_26 = IOMUX_PAD(0x394, 0x19c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x398, 0x1a0, 0x00, 0, 0, PAD_CTL_PUS_47K_UP), - MX25_PAD_SD1_DATA2__FEC_RX_CLK = IOMUX_PAD(0x398, 0x1a0, 0x05, 0x514, 2, NO_PAD_CTRL), - MX25_PAD_SD1_DATA2__GPIO_2_27 = IOMUX_PAD(0x398, 0x1a0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x39c, 0x1a4, 0x00, 0, 0, PAD_CTL_PUS_47K_UP), - MX25_PAD_SD1_DATA3__FEC_CRS = IOMUX_PAD(0x39c, 0x1a4, 0x00, 0x508, 2, NO_PAD_CTRL), - MX25_PAD_SD1_DATA3__GPIO_2_28 = IOMUX_PAD(0x39c, 0x1a4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_ROW0__KPP_ROW0 = IOMUX_PAD(0x3a0, 0x1a8, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL), - MX25_PAD_KPP_ROW0__GPIO_2_29 = IOMUX_PAD(0x3a0, 0x1a8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_ROW1__KPP_ROW1 = IOMUX_PAD(0x3a4, 0x1ac, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL), - MX25_PAD_KPP_ROW1__GPIO_2_30 = IOMUX_PAD(0x3a4, 0x1ac, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_ROW2__KPP_ROW2 = IOMUX_PAD(0x3a8, 0x1b0, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL), - MX25_PAD_KPP_ROW2__CSI_D0 = IOMUX_PAD(0x3a8, 0x1b0, 0x03, 0x488, 2, NO_PAD_CTRL), - MX25_PAD_KPP_ROW2__GPIO_2_31 = IOMUX_PAD(0x3a8, 0x1b0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_ROW3__KPP_ROW3 = IOMUX_PAD(0x3ac, 0x1b4, 0x00, 0, 0, MX25_KPP_ROW_PAD_CTRL), - MX25_PAD_KPP_ROW3__CSI_LD1 = IOMUX_PAD(0x3ac, 0x1b4, 0x03, 0x48c, 2, NO_PAD_CTRL), - MX25_PAD_KPP_ROW3__GPIO_3_0 = IOMUX_PAD(0x3ac, 0x1b4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_COL0__KPP_COL0 = IOMUX_PAD(0x3b0, 0x1b8, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL), - MX25_PAD_KPP_COL0__UART4_RXD_MUX = IOMUX_PAD(0x3b0, 0x1b8, 0x01, 0x570, 1, NO_PAD_CTRL), - MX25_PAD_KPP_COL0__AUD5_TXD = IOMUX_PAD(0x3b0, 0x1b8, 0x02, 0, 0, PAD_CTL_PUS_100K_UP), - MX25_PAD_KPP_COL0__GPIO_3_1 = IOMUX_PAD(0x3b0, 0x1b8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_COL1__KPP_COL1 = IOMUX_PAD(0x3b4, 0x1bc, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL), - MX25_PAD_KPP_COL1__UART4_TXD_MUX = IOMUX_PAD(0x3b4, 0x1bc, 0x01, 0, 0, NO_PAD_CTRL), - MX25_PAD_KPP_COL1__AUD5_RXD = IOMUX_PAD(0x3b4, 0x1bc, 0x02, 0, 0, PAD_CTL_PUS_100K_UP), - MX25_PAD_KPP_COL1__GPIO_3_2 = IOMUX_PAD(0x3b4, 0x1bc, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_COL2__KPP_COL2 = IOMUX_PAD(0x3b8, 0x1c0, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL), - MX25_PAD_KPP_COL2__UART4_RTS = IOMUX_PAD(0x3b8, 0x1c0, 0x01, 0, 0, NO_PAD_CTRL), - MX25_PAD_KPP_COL2__AUD5_TXC = IOMUX_PAD(0x3b8, 0x1c0, 0x02, 0, 0, PAD_CTL_PUS_100K_UP), - MX25_PAD_KPP_COL2__GPIO_3_3 = IOMUX_PAD(0x3b8, 0x1c0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_KPP_COL3__KPP_COL3 = IOMUX_PAD(0x3bc, 0x1c4, 0x00, 0, 0, MX25_KPP_COL_PAD_CTRL), - MX25_PAD_KPP_COL3__UART4_CTS = IOMUX_PAD(0x3bc, 0x1c4, 0x01, 0, 0, NO_PAD_CTRL), - MX25_PAD_KPP_COL3__AUD5_TXFS = IOMUX_PAD(0x3bc, 0x1c4, 0x02, 0, 0, PAD_CTL_PUS_100K_UP), - MX25_PAD_KPP_COL3__GPIO_3_4 = IOMUX_PAD(0x3bc, 0x1c4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x3c0, 0x1c8, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_FEC_MDC__AUD4_TXD = IOMUX_PAD(0x3c0, 0x1c8, 0x02, 0x464, 1, NO_PAD_CTRL), - MX25_PAD_FEC_MDC__GPIO_3_5 = IOMUX_PAD(0x3c0, 0x1c8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x3c4, 0x1cc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP), - MX25_PAD_FEC_MDIO__AUD4_RXD = IOMUX_PAD(0x3c4, 0x1cc, 0x02, 0x460, 1, NO_PAD_CTRL), - MX25_PAD_FEC_MDIO__GPIO_3_6 = IOMUX_PAD(0x3c4, 0x1cc, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_TDATA0__FEC_TDATA0 = IOMUX_PAD(0x3c8, 0x1d0, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_FEC_TDATA0__GPIO_3_7 = IOMUX_PAD(0x3c8, 0x1d0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_TDATA1__FEC_TDATA1 = IOMUX_PAD(0x3cc, 0x1d4, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_FEC_TDATA1__AUD4_TXFS = IOMUX_PAD(0x3cc, 0x1d4, 0x02, 0x474, 1, NO_PAD_CTRL), - MX25_PAD_FEC_TDATA1__GPIO_3_8 = IOMUX_PAD(0x3cc, 0x1d4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x3d0, 0x1d8, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_FEC_TX_EN__GPIO_3_9 = IOMUX_PAD(0x3d0, 0x1d8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_RDATA0__FEC_RDATA0 = IOMUX_PAD(0x3d4, 0x1dc, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - MX25_PAD_FEC_RDATA0__GPIO_3_10 = IOMUX_PAD(0x3d4, 0x1dc, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_RDATA1__FEC_RDATA1 = IOMUX_PAD(0x3d8, 0x1e0, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - MX25_PAD_FEC_RDATA1__GPIO_3_11 = IOMUX_PAD(0x3d8, 0x1e0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_RX_DV__FEC_RX_DV = IOMUX_PAD(0x3dc, 0x1e4, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - MX25_PAD_FEC_RX_DV__CAN2_RX = IOMUX_PAD(0x3dc, 0x1e4, 0x04, 0x484, 0, PAD_CTL_PUS_22K_UP), - MX25_PAD_FEC_RX_DV__GPIO_3_12 = IOMUX_PAD(0x3dc, 0x1e4, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK = IOMUX_PAD(0x3e0, 0x1e8, 0x00, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), - MX25_PAD_FEC_TX_CLK__GPIO_3_13 = IOMUX_PAD(0x3e0, 0x1e8, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_RTCK__RTCK = IOMUX_PAD(0x3e4, 0x1ec, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_RTCK__OWIRE = IOMUX_PAD(0x3e4, 0x1ec, 0x01, 0, 0, NO_PAD_CTRL), - MX25_PAD_RTCK__GPIO_3_14 = IOMUX_PAD(0x3e4, 0x1ec, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_DE_B__DE_B = IOMUX_PAD(0x3ec, 0x1f0, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_DE_B__GPIO_2_20 = IOMUX_PAD(0x3ec, 0x1f0, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_TDO__TDO = IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL), - - MX25_PAD_GPIO_A__GPIO_A = IOMUX_PAD(0x3f0, 0x1f4, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_GPIO_A__CAN1_TX = IOMUX_PAD(0x3f0, 0x1f4, 0x06, 0, 0, PAD_CTL_PUS_22K_UP), - MX25_PAD_GPIO_A__USBOTG_PWR = IOMUX_PAD(0x3f0, 0x1f4, 0x02, 0, 0, PAD_CTL_PKE), - - MX25_PAD_GPIO_B__GPIO_B = IOMUX_PAD(0x3f4, 0x1f8, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_GPIO_B__CAN1_RX = IOMUX_PAD(0x3f4, 0x1f8, 0x06, 0x480, 1, PAD_CTL_PUS_22K_UP), - MX25_PAD_GPIO_B__USBOTG_OC = IOMUX_PAD(0x3f4, 0x1f8, 0x02, 0x57c, 1, PAD_CTL_PUS_100K_UP), - - MX25_PAD_GPIO_C__GPIO_C = IOMUX_PAD(0x3f8, 0x1fc, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_GPIO_C__CAN2_TX = IOMUX_PAD(0x3f8, 0x1fc, 0x06, 0, 0, PAD_CTL_PUS_22K_UP), - - MX25_PAD_GPIO_D__GPIO_D = IOMUX_PAD(0x3fc, 0x200, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_GPIO_E__LD16 = IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_GPIO_D__CAN2_RX = IOMUX_PAD(0x3fc, 0x200, 0x06, 0x484, 1, PAD_CTL_PUS_22K_UP), - - MX25_PAD_GPIO_E__GPIO_E = IOMUX_PAD(0x400, 0x204, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_GPIO_F__LD17 = IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST), - MX25_PAD_GPIO_E__I2C3_CLK = IOMUX_PAD(0x400, 0x204, 0x01, 0x524, 2, NO_PAD_CTRL), - MX25_PAD_GPIO_E__AUD7_TXD = IOMUX_PAD(0x400, 0x204, 0x04, 0, 0, NO_PAD_CTRL), - - MX25_PAD_GPIO_F__GPIO_F = IOMUX_PAD(0x404, 0x208, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_GPIO_F__AUD7_TXC = IOMUX_PAD(0x404, 0x208, 0x04, 0, 0, NO_PAD_CTRL), - - MX25_PAD_EXT_ARMCLK__EXT_ARMCLK = IOMUX_PAD(0x000, 0x20c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_EXT_ARMCLK__GPIO_3_15 = IOMUX_PAD(0x000, 0x20c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK = IOMUX_PAD(0x000, 0x210, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_UPLL_BYPCLK__GPIO_3_16 = IOMUX_PAD(0x000, 0x210, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_VSTBY_REQ__VSTBY_REQ = IOMUX_PAD(0x408, 0x214, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_VSTBY_REQ__AUD7_TXFS = IOMUX_PAD(0x408, 0x214, 0x04, 0, 0, NO_PAD_CTRL), - MX25_PAD_VSTBY_REQ__GPIO_3_17 = IOMUX_PAD(0x408, 0x214, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_VSTBY_ACK__VSTBY_ACK = IOMUX_PAD(0x40c, 0x218, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_VSTBY_ACK__GPIO_3_18 = IOMUX_PAD(0x40c, 0x218, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_POWER_FAIL__POWER_FAIL = IOMUX_PAD(0x410, 0x21c, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_POWER_FAIL__AUD7_RXD = IOMUX_PAD(0x410, 0x21c, 0x04, 0x478, 1, NO_PAD_CTRL), - MX25_PAD_POWER_FAIL__GPIO_3_19 = IOMUX_PAD(0x410, 0x21c, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CLKO__CLKO = IOMUX_PAD(0x414, 0x220, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_CLKO__GPIO_2_21 = IOMUX_PAD(0x414, 0x220, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_BOOT_MODE0__BOOT_MODE0 = IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_BOOT_MODE0__GPIO_4_30 = IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL), - MX25_PAD_BOOT_MODE1__BOOT_MODE1 = IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL), - MX25_PAD_BOOT_MODE1__GPIO_4_31 = IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL), - - MX25_PAD_CTL_GRP_DVS_MISC = IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_FEC = IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DVS_JTAG = IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_NFC = IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_CSI = IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_WEIM = IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_DDR = IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DVS_CRM = IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_KPP = IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_SDHC1 = IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_LCD = IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_UART = IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DVS_NFC = IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DVS_CSI = IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DSE_CSPI1 = IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DDRTYPE = IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DVS_SDHC1 = IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL), - MX25_PAD_CTL_GRP_DVS_LCD = IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL), -}; - -#endif /* __IOMUX_MX25_H__ */ diff --git a/arch/arm/include/asm/arch-mx25/macro.h b/arch/arm/include/asm/arch-mx25/macro.h deleted file mode 100644 index 68bddf4952..0000000000 --- a/arch/arm/include/asm/arch-mx25/macro.h +++ /dev/null @@ -1,90 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011 - * Matthias Weisser - * - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby - * - * Common asm macros for imx25 - */ - -#ifndef __ASM_ARM_ARCH_MACRO_H__ -#define __ASM_ARM_ARCH_MACRO_H__ -#ifdef __ASSEMBLY__ - -#include -#include -#include - -/* - * AIPS setup - Only setup MPROTx registers. - * The PACR default values are good. - * - * Default argument values: - * - MPR: Set all MPROTx to be non-bufferable, trusted for R/W, not forced to - * user-mode. - */ -.macro init_aips mpr=0x77777777 - ldr r0, =IMX_AIPS1_BASE - ldr r1, =\mpr - str r1, [r0, #AIPS_MPR_0_7] - str r1, [r0, #AIPS_MPR_8_15] - ldr r2, =IMX_AIPS2_BASE - str r1, [r2, #AIPS_MPR_0_7] - str r1, [r2, #AIPS_MPR_8_15] -.endm - -/* - * MAX (Multi-Layer AHB Crossbar Switch) setup - * - * Default argument values: - * - MPR: priority is IAHB > DAHB > USBOTG > RTIC > eSDHC2/SDMA - * - SGPCR: always park on last master - * - MGPCR: restore default values - */ -.macro init_max mpr=0x00043210, sgpcr=0x00000010, mgpcr=0x00000000 - ldr r0, =IMX_MAX_BASE - ldr r1, =\mpr - str r1, [r0, #MAX_MPR0] /* for S0 */ - str r1, [r0, #MAX_MPR1] /* for S1 */ - str r1, [r0, #MAX_MPR2] /* for S2 */ - str r1, [r0, #MAX_MPR3] /* for S3 */ - str r1, [r0, #MAX_MPR4] /* for S4 */ - ldr r1, =\sgpcr - str r1, [r0, #MAX_SGPCR0] /* for S0 */ - str r1, [r0, #MAX_SGPCR1] /* for S1 */ - str r1, [r0, #MAX_SGPCR2] /* for S2 */ - str r1, [r0, #MAX_SGPCR3] /* for S3 */ - str r1, [r0, #MAX_SGPCR4] /* for S4 */ - ldr r1, =\mgpcr - str r1, [r0, #MAX_MGPCR0] /* for M0 */ - str r1, [r0, #MAX_MGPCR1] /* for M1 */ - str r1, [r0, #MAX_MGPCR2] /* for M2 */ - str r1, [r0, #MAX_MGPCR3] /* for M3 */ - str r1, [r0, #MAX_MGPCR4] /* for M4 */ -.endm - -/* - * M3IF setup - * - * Default argument values: - * - CTL: - * MRRP[0] = LCDC on priority list (1 << 0) = 0x00000001 - * MRRP[1] = MAX1 not on priority list (0 << 1) = 0x00000000 - * MRRP[2] = MAX0 not on priority list (0 << 2) = 0x00000000 - * MRRP[3] = USBH not on priority list (0 << 3) = 0x00000000 - * MRRP[4] = SDMA not on priority list (0 << 4) = 0x00000000 - * MRRP[5] = eSDHC1/ATA/FEC not on priority list (0 << 5) = 0x00000000 - * MRRP[6] = LCDC/SLCDC/MAX2 not on priority list (0 << 6) = 0x00000000 - * MRRP[7] = CSI not on priority list (0 << 7) = 0x00000000 - * ------------ - * 0x00000001 - */ -.macro init_m3if ctl=0x00000001 - /* M3IF Control Register (M3IFCTL) */ - write32 IMX_M3IF_CTRL_BASE, \ctl -.endm - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARM_ARCH_MACRO_H__ */ diff --git a/arch/arm/lib/asm-offsets.c b/arch/arm/lib/asm-offsets.c index 379f77a45d..22fd541f9a 100644 --- a/arch/arm/lib/asm-offsets.c +++ b/arch/arm/lib/asm-offsets.c @@ -15,7 +15,7 @@ #include #include -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) \ +#if defined(CONFIG_MX27) \ || defined(CONFIG_MX51) || defined(CONFIG_MX53) #include #endif @@ -35,42 +35,6 @@ int main(void) * code. Is it better to define the macros directly in headers? */ -#if defined(CONFIG_MX25) - /* Clock Control Module */ - DEFINE(CCM_CCTL, offsetof(struct ccm_regs, cctl)); - DEFINE(CCM_CGCR0, offsetof(struct ccm_regs, cgr0)); - DEFINE(CCM_CGCR1, offsetof(struct ccm_regs, cgr1)); - DEFINE(CCM_CGCR2, offsetof(struct ccm_regs, cgr2)); - DEFINE(CCM_PCDR2, offsetof(struct ccm_regs, pcdr[2])); - DEFINE(CCM_MCR, offsetof(struct ccm_regs, mcr)); - - /* Enhanced SDRAM Controller */ - DEFINE(ESDRAMC_ESDCTL0, offsetof(struct esdramc_regs, ctl0)); - DEFINE(ESDRAMC_ESDCFG0, offsetof(struct esdramc_regs, cfg0)); - DEFINE(ESDRAMC_ESDMISC, offsetof(struct esdramc_regs, misc)); - - /* Multi-Layer AHB Crossbar Switch */ - DEFINE(MAX_MPR0, offsetof(struct max_regs, mpr0)); - DEFINE(MAX_SGPCR0, offsetof(struct max_regs, sgpcr0)); - DEFINE(MAX_MPR1, offsetof(struct max_regs, mpr1)); - DEFINE(MAX_SGPCR1, offsetof(struct max_regs, sgpcr1)); - DEFINE(MAX_MPR2, offsetof(struct max_regs, mpr2)); - DEFINE(MAX_SGPCR2, offsetof(struct max_regs, sgpcr2)); - DEFINE(MAX_MPR3, offsetof(struct max_regs, mpr3)); - DEFINE(MAX_SGPCR3, offsetof(struct max_regs, sgpcr3)); - DEFINE(MAX_MPR4, offsetof(struct max_regs, mpr4)); - DEFINE(MAX_SGPCR4, offsetof(struct max_regs, sgpcr4)); - DEFINE(MAX_MGPCR0, offsetof(struct max_regs, mgpcr0)); - DEFINE(MAX_MGPCR1, offsetof(struct max_regs, mgpcr1)); - DEFINE(MAX_MGPCR2, offsetof(struct max_regs, mgpcr2)); - DEFINE(MAX_MGPCR3, offsetof(struct max_regs, mgpcr3)); - DEFINE(MAX_MGPCR4, offsetof(struct max_regs, mgpcr4)); - - /* AHB <-> IP-Bus Interface */ - DEFINE(AIPS_MPR_0_7, offsetof(struct aips_regs, mpr_0_7)); - DEFINE(AIPS_MPR_8_15, offsetof(struct aips_regs, mpr_8_15)); -#endif - #if defined(CONFIG_MX27) DEFINE(AIPI1_PSR0, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr0)); DEFINE(AIPI1_PSR1, IMX_AIPI1_BASE + offsetof(struct aipi_regs, psr1)); diff --git a/arch/arm/mach-imx/mx2/Kconfig b/arch/arm/mach-imx/mx2/Kconfig deleted file mode 100644 index fad5dcc940..0000000000 --- a/arch/arm/mach-imx/mx2/Kconfig +++ /dev/null @@ -1,23 +0,0 @@ -if ARCH_MX25 - -config MX25 - bool - default y - select SYS_FSL_ERRATUM_ESDHC_A001 -choice - prompt "MX25 board select" - optional - -config TARGET_ZMX25 - bool "Support zmx25" - select BOARD_LATE_INIT - select CPU_ARM926EJS - -endchoice - -config SYS_SOC - default "mx25" - -source "board/syteco/zmx25/Kconfig" - -endif diff --git a/board/syteco/zmx25/Kconfig b/board/syteco/zmx25/Kconfig deleted file mode 100644 index 59a415d65f..0000000000 --- a/board/syteco/zmx25/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_ZMX25 - -config SYS_BOARD - default "zmx25" - -config SYS_VENDOR - default "syteco" - -config SYS_SOC - default "mx25" - -config SYS_CONFIG_NAME - default "zmx25" - -endif diff --git a/board/syteco/zmx25/MAINTAINERS b/board/syteco/zmx25/MAINTAINERS deleted file mode 100644 index 90f9fab7b8..0000000000 --- a/board/syteco/zmx25/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ZMX25 BOARD -M: Matthias Weisser -S: Maintained -F: board/syteco/zmx25/ -F: include/configs/zmx25.h -F: configs/zmx25_defconfig diff --git a/board/syteco/zmx25/Makefile b/board/syteco/zmx25/Makefile deleted file mode 100644 index 49b3a8f189..0000000000 --- a/board/syteco/zmx25/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (c) 2010 Graf-Syteco, Matthias Weisser -# - -obj-y += zmx25.o -obj-y += lowlevel_init.o diff --git a/board/syteco/zmx25/lowlevel_init.S b/board/syteco/zmx25/lowlevel_init.S deleted file mode 100644 index 7df9398841..0000000000 --- a/board/syteco/zmx25/lowlevel_init.S +++ /dev/null @@ -1,96 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011 - * Matthias Weisser - * - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby - * - * Based on U-Boot and RedBoot sources for several different i.mx - * platforms. - */ - -#include -#include -#include -#include - -/* - * clocks - */ -.macro init_clocks - - /* disable clock output */ - write32 IMX_CCM_BASE + CCM_MCR, 0x00000000 - write32 IMX_CCM_BASE + CCM_CCTL, 0x50030000 - - /* - * enable all implemented clocks in all three - * clock control registers - */ - write32 IMX_CCM_BASE + CCM_CGCR0, 0x1fffffff - write32 IMX_CCM_BASE + CCM_CGCR1, 0xffffffff - write32 IMX_CCM_BASE + CCM_CGCR2, 0xfffff - - /* Devide NAND clock by 32 */ - write32 IMX_CCM_BASE + CCM_PCDR2, 0x0101011F -.endm - -/* - * sdram controller init - */ -.macro init_lpddr - ldr r0, =IMX_ESDRAMC_BASE - ldr r2, =IMX_SDRAM_BANK0_BASE - - /* - * reset SDRAM controller - * then wait for initialization to complete - */ - ldr r1, =(1 << 1) | (1 << 2) - str r1, [r0, #ESDRAMC_ESDMISC] -1: ldr r3, [r0, #ESDRAMC_ESDMISC] - tst r3, #(1 << 31) - beq 1b - ldr r1, =(1 << 2) - str r1, [r0, #ESDRAMC_ESDMISC] - - ldr r1, =0x002a7420 - str r1, [r0, #ESDRAMC_ESDCFG0] - - /* control | precharge */ - ldr r1, =0x92216008 - str r1, [r0, #ESDRAMC_ESDCTL0] - /* dram command encoded in address */ - str r1, [r2, #0x400] - - /* auto refresh */ - ldr r1, =0xa2216008 - str r1, [r0, #ESDRAMC_ESDCTL0] - /* read dram twice to auto refresh */ - ldr r3, [r2] - ldr r3, [r2] - - /* control | load mode */ - ldr r1, =0xb2216008 - str r1, [r0, #ESDRAMC_ESDCTL0] - - /* mode register of lpddram */ - strb r1, [r2, #0x33] - - /* extended mode register of lpddrram */ - ldr r2, =0x81000000 - strb r1, [r2] - - /* control | normal */ - ldr r1, =0x82216008 - str r1, [r0, #ESDRAMC_ESDCTL0] -.endm - -.globl lowlevel_init -lowlevel_init: - init_aips - init_max - init_clocks - init_lpddr - mov pc, lr diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c deleted file mode 100644 index 2d4c5cce89..0000000000 --- a/board/syteco/zmx25/zmx25.c +++ /dev/null @@ -1,178 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (c) 2011 Graf-Syteco, Matthias Weisser - * - * - * Based on tx25.c: - * (C) Copyright 2009 DENX Software Engineering - * Author: John Rigby - * - * Based on imx27lite.c: - * Copyright (C) 2008,2009 Eric Jarrige - * Copyright (C) 2009 Ilya Yanok - * And: - * RedBoot tx25_misc.c Copyright (C) 2009 Red Hat - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -int board_init() -{ - static const iomux_v3_cfg_t sdhc1_pads[] = { - NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL), - }; - - static const iomux_v3_cfg_t dig_out_pads[] = { - MX25_PAD_CSI_D8__GPIO_1_7, /* Ouput 1 Ctrl */ - MX25_PAD_CSI_D7__GPIO_1_6, /* Ouput 2 Ctrl */ - NEW_PAD_CTRL(MX25_PAD_CSI_D6__GPIO_1_31, 0), /* Ouput 1 Stat */ - NEW_PAD_CTRL(MX25_PAD_CSI_D5__GPIO_1_30, 0), /* Ouput 2 Stat */ - }; - - static const iomux_v3_cfg_t led_pads[] = { - MX25_PAD_CSI_D9__GPIO_4_21, - MX25_PAD_CSI_D4__GPIO_1_29, - }; - - static const iomux_v3_cfg_t can_pads[] = { - NEW_PAD_CTRL(MX25_PAD_GPIO_A__CAN1_TX, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_GPIO_B__CAN1_RX, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_GPIO_C__CAN2_TX, NO_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_GPIO_D__CAN2_RX, NO_PAD_CTRL), - }; - - static const iomux_v3_cfg_t i2c3_pads[] = { - MX25_PAD_CSPI1_SS1__I2C3_DAT, - MX25_PAD_GPIO_E__I2C3_CLK, - }; - - icache_enable(); - - /* Setup of core voltage selection pin to run at 1.4V */ - imx_iomux_v3_setup_pad(MX25_PAD_EXT_ARMCLK__GPIO_3_15); /* VCORE */ - gpio_direction_output(IMX_GPIO_NR(3, 15), 1); - - /* Setup of SD card pins*/ - imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); - - /* Setup of digital output for USB power and OC */ - imx_iomux_v3_setup_pad(MX25_PAD_CSI_D3__GPIO_1_28); /* USB Power */ - gpio_direction_output(IMX_GPIO_NR(1, 28), 1); - - imx_iomux_v3_setup_pad(MX25_PAD_CSI_D2__GPIO_1_27); /* USB OC */ - gpio_direction_input(IMX_GPIO_NR(1, 18)); - - /* Setup of digital output control pins */ - imx_iomux_v3_setup_multiple_pads(dig_out_pads, - ARRAY_SIZE(dig_out_pads)); - - /* Switch both output drivers off */ - gpio_direction_output(IMX_GPIO_NR(1, 7), 0); - gpio_direction_output(IMX_GPIO_NR(1, 6), 0); - - /* Setup of key input pin */ - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_KPP_ROW0__GPIO_2_29, 0)); - gpio_direction_input(IMX_GPIO_NR(2, 29)); - - /* Setup of status LED outputs */ - imx_iomux_v3_setup_multiple_pads(led_pads, ARRAY_SIZE(led_pads)); - - /* Switch both LEDs off */ - gpio_direction_output(IMX_GPIO_NR(4, 21), 0); - gpio_direction_output(IMX_GPIO_NR(1, 29), 0); - - /* Setup of CAN1 and CAN2 signals */ - imx_iomux_v3_setup_multiple_pads(can_pads, ARRAY_SIZE(can_pads)); - - /* Setup of I2C3 signals */ - imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads)); - - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int board_late_init(void) -{ - const char *e; - -#ifdef CONFIG_FEC_MXC -/* - * FIXME: need to revisit this - * The original code enabled PUE and 100-k pull-down without PKE, so the right - * value here is likely: - * 0 for no pull - * or: - * PAD_CTL_PUS_100K_DOWN for 100-k pull-down - */ -#define FEC_OUT_PAD_CTRL 0 - - static const iomux_v3_cfg_t fec_pads[] = { - MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX25_PAD_FEC_RX_DV__FEC_RX_DV, - MX25_PAD_FEC_RDATA0__FEC_RDATA0, - NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL), - NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL), - MX25_PAD_FEC_MDIO__FEC_MDIO, - MX25_PAD_FEC_RDATA1__FEC_RDATA1, - NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL), - - MX25_PAD_UPLL_BYPCLK__GPIO_3_16, /* LAN-RESET */ - MX25_PAD_UART2_CTS__FEC_RX_ER, /* FEC_RX_ERR */ - }; - - imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); - - /* assert PHY reset (low) */ - gpio_direction_output(IMX_GPIO_NR(3, 16), 0); - - udelay(5000); - - /* deassert PHY reset */ - gpio_set_value(IMX_GPIO_NR(3, 16), 1); - - udelay(5000); -#endif - - e = env_get("gs_base_board"); - if (e != NULL) { - if (strcmp(e, "G283") == 0) { - int key = gpio_get_value(IMX_GPIO_NR(2, 29)); - - if (key) { - /* Switch on both LEDs to inidcate boot mode */ - gpio_set_value(IMX_GPIO_NR(1, 29), 0); - gpio_set_value(IMX_GPIO_NR(4, 21), 0); - - env_set("preboot", "run gs_slow_boot"); - } else - env_set("preboot", "run gs_fast_boot"); - } - } - - return 0; -} - -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, - PHYS_SDRAM_SIZE); - return 0; -} diff --git a/configs/zmx25_defconfig b/configs/zmx25_defconfig deleted file mode 100644 index df6d934733..0000000000 --- a/configs/zmx25_defconfig +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_MX25=y -CONFIG_SYS_TEXT_BASE=0xA0000000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_TARGET_ZMX25=y -CONFIG_IMX_CONFIG="" -CONFIG_SYS_MALLOC_LEN=0x3f8000 -CONFIG_SYS_LOAD_ADDR=0x80000000 -CONFIG_BOOTDELAY=5 -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="boot in %d s\n" -CONFIG_AUTOBOOT_DELAY_STR="delaygs" -CONFIG_AUTOBOOT_STOP_STR="stopgs" -CONFIG_USE_PREBOOT=y -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -# CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="zmx25> " -CONFIG_CMD_IMLS=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_ENV_ADDR=0xA0040000 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MII=y -CONFIG_MXC_UART=y -CONFIG_USB=y -CONFIG_LZO=y diff --git a/doc/imx/common/imx25.txt b/doc/imx/common/imx25.txt deleted file mode 100644 index 0ca21b6dfe..0000000000 --- a/doc/imx/common/imx25.txt +++ /dev/null @@ -1,10 +0,0 @@ -U-Boot for Freescale i.MX25 - -This file contains information for the port of U-Boot to the Freescale i.MX25 -SoC. - -1. CONVENTIONS FOR FUSE ASSIGNMENTS ------------------------------------ - -1.1 MAC Address: It is stored in the words 26 to 31 of fuse bank 0, using the - natural MAC byte order (i.e. MSB first). diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 06e6b2279f..03471db9e8 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -44,7 +44,7 @@ static unsigned long gpio_ports[] = { [0] = GPIO1_BASE_ADDR, [1] = GPIO2_BASE_ADDR, [2] = GPIO3_BASE_ADDR, -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ +#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || \ defined(CONFIG_ARCH_IMX8) || defined(CONFIG_IMXRT1050) @@ -352,7 +352,7 @@ static const struct mxc_gpio_plat mxc_plat[] = { { 0, (struct gpio_regs *)GPIO1_BASE_ADDR }, { 1, (struct gpio_regs *)GPIO2_BASE_ADDR }, { 2, (struct gpio_regs *)GPIO3_BASE_ADDR }, -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ +#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8) { 3, (struct gpio_regs *)GPIO4_BASE_ADDR }, @@ -376,7 +376,7 @@ U_BOOT_DRVINFOS(mxc_gpios) = { { "gpio_mxc", &mxc_plat[0] }, { "gpio_mxc", &mxc_plat[1] }, { "gpio_mxc", &mxc_plat[2] }, -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ +#if defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ defined(CONFIG_MX53) || defined(CONFIG_MX6) || \ defined(CONFIG_IMX8M) || defined(CONFIG_ARCH_IMX8) { "gpio_mxc", &mxc_plat[3] }, diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c index d6e17bfeae..c38f286e61 100644 --- a/drivers/mtd/nand/raw/mxc_nand.c +++ b/drivers/mtd/nand/raw/mxc_nand.c @@ -11,7 +11,7 @@ #include #include #include -#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || \ +#if defined(CONFIG_MX27) || \ defined(CONFIG_MX51) || defined(CONFIG_MX53) #include #endif diff --git a/drivers/mtd/nand/raw/mxc_nand.h b/drivers/mtd/nand/raw/mxc_nand.h index 09bcb8f028..771f61e249 100644 --- a/drivers/mtd/nand/raw/mxc_nand.h +++ b/drivers/mtd/nand/raw/mxc_nand.h @@ -29,11 +29,6 @@ #define is_mxc_nfc_1() 1 #define is_mxc_nfc_21() 0 #define is_mxc_nfc_32() 0 -#elif defined(CONFIG_MX25) -#define MXC_NFC_V2_1 -#define is_mxc_nfc_1() 0 -#define is_mxc_nfc_21() 1 -#define is_mxc_nfc_32() 0 #elif defined(CONFIG_MX51) || defined(CONFIG_MX53) #define MXC_NFC_V3 #define MXC_NFC_V3_2 diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 9bb42e5ca9..40a86a3e12 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -521,7 +521,7 @@ static int fec_open(struct eth_device *edev) &fec->eth->ecntrl); #endif -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) +#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL) udelay(100); /* setup the MII gasket for RMII mode */ diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 62b55ef395..1c0d0e5b8f 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -128,7 +128,7 @@ struct ethernet_regs { uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */ -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) +#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL) uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */ uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */ uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */ @@ -196,7 +196,7 @@ struct ethernet_regs { #define FEC_X_DES_ACTIVE_TDAR 0x01000000 #define FEC_R_DES_ACTIVE_RDAR 0x01000000 -#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL) +#if defined(CONFIG_MX53) || defined(CONFIG_MX6SL) /* defines for MIIGSK */ /* RMII frequency control: 0=50MHz, 1=5MHz */ #define MIIGSK_CFGR_FRCONT (1 << 6) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index cbea165b9d..3bb5b02eab 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -645,7 +645,7 @@ config MCFUART config MXC_UART bool "IMX serial port support" - depends on ARCH_MX25 || ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M + depends on ARCH_MX31 || MX5 || MX6 || MX7 || IMX8M help If you have a machine based on a Motorola IMX CPU you can enable its onboard serial port by enabling this option. diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index d9a79a2031..3c53de165d 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -23,7 +23,7 @@ DECLARE_GLOBAL_DATA_PTR; /* MX35 and older is CSPI */ -#if defined(CONFIG_MX25) || defined(CONFIG_MX31) +#if defined(CONFIG_MX31) #define MXC_CSPI struct cspi_regs { u32 rxdata; @@ -48,17 +48,10 @@ struct cspi_regs { #define MXC_CSPICTRL_RXOVF BIT(6) #define MXC_CSPIPERIOD_32KHZ BIT(15) #define MAX_SPI_BYTES 4 -#if defined(CONFIG_MX25) -#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12) -#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20) -#define MXC_CSPICTRL_TC BIT(7) -#define MXC_CSPICTRL_MAXBITS 0xfff -#else /* MX31 */ #define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 24) #define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0x1f) << 8) #define MXC_CSPICTRL_TC BIT(8) #define MXC_CSPICTRL_MAXBITS 0x1f -#endif #else /* MX51 and newer is ECSPI */ #define MXC_ECSPI diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index 090548fb19..1fb685e58d 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -67,56 +67,7 @@ static int mxc_set_usbcontrol(int port, unsigned int flags) unsigned int v; v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); -#if defined(CONFIG_MX25) - switch (port) { - case 0: /* OTG port */ - v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | - MX25_OTG_OCPOL_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_OTG_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_OTG_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_OTG_OCPOL_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | - MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | - MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | - MX25_H1_IPPUE_UP_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; - - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX25_H1_PM_BIT; - - if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) - v |= MX25_H1_PP_BIT; - - if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) - v |= MX25_H1_OCPOL_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX25_H1_TLL_BIT; - - if (flags & MXC_EHCI_INTERNAL_PHY) - v |= MX25_H1_USBTE_BIT; - - if (flags & MXC_EHCI_IPPUE_DOWN) - v |= MX25_H1_IPPUE_DOWN_BIT; - - if (flags & MXC_EHCI_IPPUE_UP) - v |= MX25_H1_IPPUE_UP_BIT; - - break; - default: - return -EINVAL; - } -#elif defined(CONFIG_MX31) +#if defined(CONFIG_MX31) switch (port) { case 0: /* OTG port */ v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig index a2c51083b1..0ffc1b6444 100644 --- a/drivers/w1/Kconfig +++ b/drivers/w1/Kconfig @@ -20,7 +20,7 @@ config W1_GPIO config W1_MXC bool "Enable 1-wire controller on i.MX processors" - depends on ARCH_MX25 || ARCH_MX31 || ARCH_MX5 + depends on ARCH_MX31 || ARCH_MX5 help Support the one wire controller found in some members of the NXP i.MX SoC family. diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 6fbb5c1b6d..eaa6f16f5c 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -24,7 +24,7 @@ config WATCHDOG_AUTOSTART config WATCHDOG_TIMEOUT_MSECS int "Watchdog timeout in msec" - default 128000 if ARCH_MX25 || ARCH_MX31 || ARCH_MX5 || ARCH_MX6 + default 128000 if ARCH_MX31 || ARCH_MX5 || ARCH_MX6 default 128000 if ARCH_MX7 || ARCH_VF610 default 30000 if ARCH_SOCFPGA default 60000 diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h deleted file mode 100644 index d7cbb0f7c9..0000000000 --- a/include/configs/zmx25.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (c) 2011 Graf-Syteco, Matthias Weisser - * - * - * Configuation settings for the zmx25 board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -#define CONFIG_SYS_TIMER_RATE 32768 -#define CONFIG_SYS_TIMER_COUNTER \ - (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) - -/* - * Environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "gs_fast_boot=setenv bootdelay 5\0" \ - "gs_slow_boot=setenv bootdelay 10\0" \ - "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \ - "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \ - "bootm 0x81000000; bootelf 0x81000000\0" - -/* - * Hardware drivers - */ - -/* - * Serial - */ -#define CONFIG_MXC_UART_BASE UART2_BASE - -/* - * Ethernet - */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0x00 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * USB - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI_MXC -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORT 1 -#define CONFIG_MXC_USB_PORTSC PORT_PTS_SERIAL -#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN) -#define CONFIG_EHCI_IS_TDI -#endif /* CONFIG_CMD_USB */ - -/* SDRAM */ -#define PHYS_SDRAM 0x80000000 /* start address of LPDDRRAM */ -#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_SP_ADDR 0x78020000 /* end of internal SRAM */ - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_BASE 0xA0000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -/* - * CFI FLASH driver setup - */ - -#endif /* __CONFIG_H */