From: Álvaro Fernández Rojas Date: Tue, 23 Jan 2018 16:14:56 +0000 (+0100) Subject: drivers: spi: allow limiting reads X-Git-Tag: v2018.03-rc1~97^2~31 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8af74edc30bb60a90a5c4d2769ff3129b187796e;p=platform%2Fkernel%2Fu-boot.git drivers: spi: allow limiting reads For some SPI controllers it's not possible to keep the CS active between transfers and they are limited to a known number of bytes. This splits spi_flash reads into different iterations in order to respect the SPI controller limits. Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Simon Glass Reviewed-by: Daniel Schwierzeck Reviewed-by: Jagan Teki --- diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 51e28bf..e40e1c0 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -516,6 +516,9 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, else read_len = remain_len; + if (spi->max_read_size) + read_len = min(read_len, spi->max_read_size); + spi_flash_addr(read_addr, cmd); ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); diff --git a/include/spi.h b/include/spi.h index 08c7480..4787454 100644 --- a/include/spi.h +++ b/include/spi.h @@ -86,6 +86,8 @@ struct dm_spi_slave_platdata { * @cs: ID of the chip select connected to the slave. * @mode: SPI mode to use for this slave (see SPI mode flags) * @wordlen: Size of SPI word in number of bits + * @max_read_size: If non-zero, the maximum number of bytes which can + * be read at once. * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. * @memory_map: Address of read-only SPI flash access. @@ -102,6 +104,7 @@ struct spi_slave { #endif uint mode; unsigned int wordlen; + unsigned int max_read_size; unsigned int max_write_size; void *memory_map;