From: Alexander Duyck Date: Thu, 30 Jul 2015 22:19:28 +0000 (-0700) Subject: ixgbe: Limit lowest interrupt rate for adaptive interrupt moderation to 12K X-Git-Tag: v5.15~14822^2~330^2~15 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8ac34f10a5ea4c7b6f57dfd52b0693a2b67d9ac4;p=platform%2Fkernel%2Flinux-starfive.git ixgbe: Limit lowest interrupt rate for adaptive interrupt moderation to 12K This patch updates the lowest limit for adaptive interrupt interrupt moderation to roughly 12K interrupts per second. The way I came about reaching 12K as the desired interrupt rate is by testing with UDP flows. Specifically I had a simple test that ran a netperf UDP_STREAM test at varying sizes. What I found was as the packet sizes increased the performance fell steadily behind until we were only able to receive at ~4Gb/s with a message size of 65507. A bit of digging found that we were dropping packets for the socket in the network stack, and looking at things further what I found was I could solve it by increasing the interrupt rate, or increasing the rmem_default/rmem_max. What I found was that when the interrupt coalescing resulted in more data being processed per interrupt than could be stored in the socket buffer we started losing packets and the performance dropped. So I reached 12K based on the following math. rmem_default = 212992 skb->truesize = 2994 212992 / 2994 = 71.14 packets to fill the buffer packet rate at 1514 packet size is 812744pps 71.14 / 812744 = 87.9us to fill socket buffer From there it was just a matter of choosing the interrupt rate and providing a bit of wiggle room which is why I decided to go with 12K interrupts per second as that uses a value of 84us. The data below is based on VM to VM over a direct assigned ixgbe interface. The test run was: netperf -H -t UDP_STREAM" Socket Message Elapsed Messages CPU Service Size Size Time Okay Errors Throughput Util Demand bytes bytes secs # # 10^6bits/sec % SS us/KB Before: 212992 65507 60.00 1100662 0 9613.4 10.89 0.557 212992 60.00 473474 4135.4 11.27 0.576 After: 212992 65507 60.00 1100413 0 9611.2 10.73 0.549 212992 60.00 974132 8508.3 11.69 0.598 Using bare metal the data is similar but not as dramatic as the throughput increases from about 8.5Gb/s to 9.5Gb/s. Signed-off-by: Alexander Duyck Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index edf1fb9..a699c99 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -539,8 +539,7 @@ struct hwmon_buff { #define IXGBE_MIN_RSC_ITR 24 #define IXGBE_100K_ITR 40 #define IXGBE_20K_ITR 200 -#define IXGBE_10K_ITR 400 -#define IXGBE_8K_ITR 500 +#define IXGBE_12K_ITR 336 /* ixgbe_test_staterr - tests bits in Rx descriptor status and error fields */ static inline __le32 ixgbe_test_staterr(union ixgbe_adv_rx_desc *rx_desc, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index ab2edc8..94c4912 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2286,7 +2286,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev, adapter->tx_itr_setting = ec->tx_coalesce_usecs; if (adapter->tx_itr_setting == 1) - tx_itr_param = IXGBE_10K_ITR; + tx_itr_param = IXGBE_12K_ITR; else tx_itr_param = adapter->tx_itr_setting; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 68e1e75..f3168bc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -866,7 +866,7 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, if (txr_count && !rxr_count) { /* tx only vector */ if (adapter->tx_itr_setting == 1) - q_vector->itr = IXGBE_10K_ITR; + q_vector->itr = IXGBE_12K_ITR; else q_vector->itr = adapter->tx_itr_setting; } else { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index c04480ed..acb1b91 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2261,7 +2261,7 @@ static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector, /* simple throttlerate management * 0-10MB/s lowest (100000 ints/s) * 10-20MB/s low (20000 ints/s) - * 20-1249MB/s bulk (8000 ints/s) + * 20-1249MB/s bulk (12000 ints/s) */ /* what was last interrupt timeslice? */ timepassed_us = q_vector->itr >> 2; @@ -2350,7 +2350,7 @@ static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector) new_itr = IXGBE_20K_ITR; break; case bulk_latency: - new_itr = IXGBE_8K_ITR; + new_itr = IXGBE_12K_ITR; break; default: break;