From: Heiko Stuebner Date: Wed, 3 Jun 2020 13:28:36 +0000 (+0200) Subject: arm64: dts: rockchip: fix rk3399-puma gmac reset gpio X-Git-Tag: v5.15~3247^2~17^2~5 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8a445086f8af0b7b9bd8d1901d6f306bb154f70d;p=platform%2Fkernel%2Flinux-starfive.git arm64: dts: rockchip: fix rk3399-puma gmac reset gpio The puma gmac node currently uses opposite active-values for the gmac phy reset pin. The gpio-declaration uses active-high while the separate snps,reset-active-low property marks the pin as active low. While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now. So bring this in line and make both properties match, similar to the other Rockchip board. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de --- diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 063f59a..72c06ab 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -157,7 +157,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>;