From: Joel Stanley Date: Fri, 8 Nov 2019 03:29:05 +0000 (+1030) Subject: watchdog: aspeed: Fix clock behaviour for ast2600 X-Git-Tag: v5.4.3~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8a13daae81fe712e1c6cf274b4934a26d6b9a4de;p=platform%2Fkernel%2Flinux-rpi.git watchdog: aspeed: Fix clock behaviour for ast2600 [ Upstream commit c04571251b3d842096f1597f5d4badb508be016d ] The ast2600 no longer uses bit 4 in the control register to indicate a 1MHz clock (It now controls whether this watchdog is reset by a SOC reset). This means we do not want to set it. It also does not need to be set for the ast2500, as it is read-only on that SoC. The comment next to the clock rate selection wandered away from where it was set, so put it back next to the register setting it's describing. Fixes: b3528b487448 ("watchdog: aspeed: Add support for AST2600") Signed-off-by: Joel Stanley Reviewed-by: Cédric Le Goater Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20191108032905.22463-1-joel@jms.id.au Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin --- diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c index 4ec0906..7e00960 100644 --- a/drivers/watchdog/aspeed_wdt.c +++ b/drivers/watchdog/aspeed_wdt.c @@ -258,11 +258,6 @@ static int aspeed_wdt_probe(struct platform_device *pdev) if (IS_ERR(wdt->base)) return PTR_ERR(wdt->base); - /* - * The ast2400 wdt can run at PCLK, or 1MHz. The ast2500 only - * runs at 1MHz. We chose to always run at 1MHz, as there's no - * good reason to have a faster watchdog counter. - */ wdt->wdd.info = &aspeed_wdt_info; wdt->wdd.ops = &aspeed_wdt_ops; wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS; @@ -278,7 +273,16 @@ static int aspeed_wdt_probe(struct platform_device *pdev) return -EINVAL; config = ofdid->data; - wdt->ctrl = WDT_CTRL_1MHZ_CLK; + /* + * On clock rates: + * - ast2400 wdt can run at PCLK, or 1MHz + * - ast2500 only runs at 1MHz, hard coding bit 4 to 1 + * - ast2600 always runs at 1MHz + * + * Set the ast2400 to run at 1MHz as it simplifies the driver. + */ + if (of_device_is_compatible(np, "aspeed,ast2400-wdt")) + wdt->ctrl = WDT_CTRL_1MHZ_CLK; /* * Control reset on a per-device basis to ensure the