From: Jeff Kirsher Date: Fri, 20 May 2011 14:50:27 +0000 (-0700) Subject: ioc3-eth/meth: Move the SGI drivers X-Git-Tag: v3.12-rc1~4599^2~528 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8862bf1ed60de49550109b7023a0a33eb7db8b3c;p=kernel%2Fkernel-generic.git ioc3-eth/meth: Move the SGI drivers Move the SGI drivers into drivers/net/ethernet/sgi/ and make the necessary Kconfig and Makefile changes. CC: Ralf Baechle Signed-off-by: Jeff Kirsher --- diff --git a/MAINTAINERS b/MAINTAINERS index fbafbb6..1bd9fbd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3424,7 +3424,7 @@ IOC3 ETHERNET DRIVER M: Ralf Baechle L: linux-mips@linux-mips.org S: Maintained -F: drivers/net/ioc3-eth.c +F: drivers/net/ethernet/sgi/ioc3-eth.c IOC3 SERIAL DRIVER M: Pat Gefre diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0cb136c..aec74ad 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -244,16 +244,6 @@ config KORINA If you have a Mikrotik RouterBoard 500 or IDT RC32434 based system say Y. Otherwise say N. -config SGI_IOC3_ETH - bool "SGI IOC3 Ethernet" - depends on PCI && SGI_IP27 - select CRC32 - select MII - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - config MIPS_SIM_NET tristate "MIPS simulator Network device" depends on MIPS_SIM @@ -262,10 +252,6 @@ config MIPS_SIM_NET emulated by the MIPS Simulator. If you are not using a MIPSsim or are unsure, say N. -config SGI_O2MACE_ETH - tristate "SGI O2 MACE Fast Ethernet support" - depends on SGI_IP32=y - config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 8a56733..c98e1ad 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -103,7 +103,6 @@ obj-$(CONFIG_MACVLAN) += macvlan.o obj-$(CONFIG_MACVTAP) += macvtap.o obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o -obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o obj-$(CONFIG_CPMAC) += cpmac.o @@ -111,7 +110,6 @@ obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_KORINA) += korina.o obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o -obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o obj-$(CONFIG_NET_NETX) += netx-eth.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index ed42850..7d25fa4 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -37,6 +37,7 @@ source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/racal/Kconfig" source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" +source "drivers/net/ethernet/sgi/Kconfig" source "drivers/net/ethernet/smsc/Kconfig" source "drivers/net/ethernet/stmicro/Kconfig" source "drivers/net/ethernet/sun/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 3de8249..ec58715 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SFC) += sfc/ +obj-$(CONFIG_NET_VENDOR_SGI) += sgi/ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/ obj-$(CONFIG_NET_VENDOR_SUN) += sun/ diff --git a/drivers/net/ethernet/sgi/Kconfig b/drivers/net/ethernet/sgi/Kconfig new file mode 100644 index 0000000..3098594 --- /dev/null +++ b/drivers/net/ethernet/sgi/Kconfig @@ -0,0 +1,34 @@ +# +# SGI device configuration +# + +config NET_VENDOR_SGI + bool "SGI devices" + depends on (PCI && SGI_IP27) || SGI_IP32 + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about SGI devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_SGI + +config SGI_IOC3_ETH + bool "SGI IOC3 Ethernet" + depends on PCI && SGI_IP27 + select CRC32 + select MII + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + +config SGI_O2MACE_ETH + tristate "SGI O2 MACE Fast Ethernet support" + depends on SGI_IP32=y + +endif # NET_VENDOR_SGI diff --git a/drivers/net/ethernet/sgi/Makefile b/drivers/net/ethernet/sgi/Makefile new file mode 100644 index 0000000..e5bedd2 --- /dev/null +++ b/drivers/net/ethernet/sgi/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SGI device drivers. +# + +obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o +obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ethernet/sgi/ioc3-eth.c similarity index 100% rename from drivers/net/ioc3-eth.c rename to drivers/net/ethernet/sgi/ioc3-eth.c diff --git a/drivers/net/meth.c b/drivers/net/ethernet/sgi/meth.c similarity index 100% rename from drivers/net/meth.c rename to drivers/net/ethernet/sgi/meth.c diff --git a/drivers/net/meth.h b/drivers/net/ethernet/sgi/meth.h similarity index 100% rename from drivers/net/meth.h rename to drivers/net/ethernet/sgi/meth.h