From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Sun, 6 Oct 2013 00:21:10 +0000 (+0900)
Subject: ARM: dts: Add reg property to regulator nodes in exynos5250-arndale
X-Git-Tag: v3.13-rc1~156^2~10^2~8
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=8365f763a7816f0b5d04f6cabd359de14b378e52;p=profile%2Fivi%2Fkernel-x86-ivi.git

ARM: dts: Add reg property to regulator nodes in exynos5250-arndale

For consistency and correctness, since this is a bus, even if not
physical, it is worth to add 'reg' property and unit-address to subnodes.
The 'reg' property would merely be an index. Also for consistency, use
"regulator" as node name as used most commonly across other dts files.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index cee55fa..0c42547 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -482,13 +482,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		main_dc_reg: fixedregulator@1 {
+		main_dc_reg: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "MAIN_DC";
 		};
 
-		mmc_reg: voltage-regulator {
+		mmc_reg: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "VDD_33ON_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
@@ -496,8 +498,9 @@
 			enable-active-high;
 		};
 
-		reg_hdmi_en: fixedregulator@0 {
+		reg_hdmi_en: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "hdmi-en";
 		};
 	};