From: Roland Vossen Date: Mon, 8 Aug 2011 13:58:58 +0000 (+0200) Subject: staging: brcm80211: removed unused bus code from softmac X-Git-Tag: v3.2-rc1~169^2^2~864^2~310 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=821e4e93172e4f7d5ac1eade04665c3dc5049c4a;p=profile%2Fivi%2Fkernel-x86-ivi.git staging: brcm80211: removed unused bus code from softmac Code cleanup. For the softmac, the 'bustype' in use is always PCI_BUS. Hence code related to dealing with different bus types (eg: PCI_BUS, JTAG_BUS, SI_BUS) could be removed. Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/brcm80211/brcmsmac/aiutils.c b/drivers/staging/brcm80211/brcmsmac/aiutils.c index 4b1c60f..37edd1c 100644 --- a/drivers/staging/brcm80211/brcmsmac/aiutils.c +++ b/drivers/staging/brcm80211/brcmsmac/aiutils.c @@ -12,7 +12,10 @@ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + * File contents: support functions for PCI/PCIe */ + #include #include @@ -488,30 +491,12 @@ void ai_scan(struct si_pub *sih, void *regs) erombase = R_REG(&cc->eromptr); - switch (sih->bustype) { - case SI_BUS: - eromptr = (u32 *) REG_MAP(erombase, SI_CORE_SIZE); - break; - - case PCI_BUS: - /* Set wrappers address */ - sii->curwrap = (void *)((unsigned long)regs + SI_CORE_SIZE); - - /* Now point the window at the erom */ - pci_write_config_dword(sii->pbus, PCI_BAR0_WIN, erombase); - eromptr = regs; - break; - - case SPI_BUS: - case SDIO_BUS: - eromptr = (u32 *)(unsigned long)erombase; - break; + /* Set wrappers address */ + sii->curwrap = (void *)((unsigned long)regs + SI_CORE_SIZE); - default: - SI_ERROR(("Don't know how to do AXI enumertion on bus %d\n", - sih->bustype)); - return; - } + /* Now point the window at the erom */ + pci_write_config_dword(sii->pbus, PCI_BAR0_WIN, erombase); + eromptr = regs; eromlim = eromptr + (ER_REMAPCONTROL / sizeof(u32)); SI_VMSG(("ai_scan: regs = 0x%p, erombase = 0x%08x, eromptr = 0x%p, " @@ -684,7 +669,8 @@ void ai_scan(struct si_pub *sih, void *regs) return; } -/* This function changes the logical "focus" to the indicated core. +/* + * This function changes the logical "focus" to the indicated core. * Return the current core's virtual address. */ void *ai_setcoreidx(struct si_pub *sih, uint coreidx) @@ -692,47 +678,17 @@ void *ai_setcoreidx(struct si_pub *sih, uint coreidx) struct si_info *sii = SI_INFO(sih); u32 addr = sii->coresba[coreidx]; u32 wrap = sii->wrapba[coreidx]; - void *regs; if (coreidx >= sii->numcores) return NULL; - switch (sih->bustype) { - case SI_BUS: - /* map new one */ - if (!sii->regs[coreidx]) - sii->regs[coreidx] = REG_MAP(addr, SI_CORE_SIZE); - - sii->curmap = regs = sii->regs[coreidx]; - if (!sii->wrappers[coreidx]) - sii->wrappers[coreidx] = REG_MAP(wrap, SI_CORE_SIZE); - - sii->curwrap = sii->wrappers[coreidx]; - break; - - case PCI_BUS: - /* point bar0 window */ - pci_write_config_dword(sii->pbus, PCI_BAR0_WIN, addr); - regs = sii->curmap; - /* point bar0 2nd 4KB window */ - pci_write_config_dword(sii->pbus, PCI_BAR0_WIN2, wrap); - break; - - case SPI_BUS: - case SDIO_BUS: - sii->curmap = regs = (void *)(unsigned long)addr; - sii->curwrap = (void *)(unsigned long)wrap; - break; - - default: - regs = NULL; - break; - } - - sii->curmap = regs; + /* point bar0 window */ + pci_write_config_dword(sii->pbus, PCI_BAR0_WIN, addr); + /* point bar0 2nd 4KB window */ + pci_write_config_dword(sii->pbus, PCI_BAR0_WIN2, wrap); sii->curidx = coreidx; - return regs; + return sii->curmap; } /* Return the number of address spaces in current core */ @@ -905,12 +861,10 @@ u32 ai_core_sflags(struct si_pub *sih, u32 mask, u32 val) /* *************** from siutils.c ************** */ /* local prototypes */ static struct si_info *ai_doattach(struct si_info *sii, void *regs, - uint bustype, void *sdh, char **vars, - uint *varsz); -static bool ai_buscore_prep(struct si_info *sii, uint bustype); + void *sdh, char **vars, uint *varsz); +static bool ai_buscore_prep(struct si_info *sii); static bool ai_buscore_setup(struct si_info *sii, struct chipcregs *cc, - uint bustype, u32 savewin, uint *origidx, - void *regs); + u32 savewin, uint *origidx, void *regs); static void ai_nvram_process(struct si_info *sii, char *pvars); /* dev path concatenation util */ @@ -919,20 +873,15 @@ static char *ai_devpathvar(struct si_pub *sih, char *var, int len, static bool _ai_clkctl_cc(struct si_info *sii, uint mode); static bool ai_ispcie(struct si_info *sii); -/* global variable to indicate reservation/release of gpio's */ -static u32 ai_gpioreservation; - /* * Allocate a si handle. * devid - pci device id (used to determine chip#) * osh - opaque OS handle * regs - virtual address of initial core registers - * bustype - pci/sb/sdio/etc * vars - pointer to a pointer area for "environment" variables * varsz - pointer to int to return the size of the vars */ -struct si_pub *ai_attach(void *regs, uint bustype, - void *sdh, char **vars, uint *varsz) +struct si_pub *ai_attach(void *regs, void *sdh, char **vars, uint *varsz) { struct si_info *sii; @@ -943,8 +892,7 @@ struct si_pub *ai_attach(void *regs, uint bustype, return NULL; } - if (ai_doattach(sii, regs, bustype, sdh, vars, varsz) == - NULL) { + if (ai_doattach(sii, regs, sdh, vars, varsz) == NULL) { kfree(sii); return NULL; } @@ -957,17 +905,17 @@ struct si_pub *ai_attach(void *regs, uint bustype, /* global kernel resource */ static struct si_info ksii; -static bool ai_buscore_prep(struct si_info *sii, uint bustype) +static bool ai_buscore_prep(struct si_info *sii) { /* kludge to enable the clock on the 4306 which lacks a slowclock */ - if (bustype == PCI_BUS && !ai_ispcie(sii)) + if (!ai_ispcie(sii)) ai_clkctl_xtal(&sii->pub, XTAL | PLL, ON); return true; } static bool -ai_buscore_setup(struct si_info *sii, struct chipcregs *cc, uint bustype, - u32 savewin, uint *origidx, void *regs) +ai_buscore_setup(struct si_info *sii, struct chipcregs *cc, u32 savewin, + uint *origidx, void *regs) { bool pci, pcie; uint i; @@ -1015,16 +963,14 @@ ai_buscore_setup(struct si_info *sii, struct chipcregs *cc, uint bustype, SI_VMSG(("CORE[%d]: id 0x%x rev %d base 0x%x regs 0x%p\n", i, cid, crev, sii->coresba[i], sii->regs[i])); - if (bustype == PCI_BUS) { - if (cid == PCI_CORE_ID) { - pciidx = i; - pcirev = crev; - pci = true; - } else if (cid == PCIE_CORE_ID) { - pcieidx = i; - pcierev = crev; - pcie = true; - } + if (cid == PCI_CORE_ID) { + pciidx = i; + pcirev = crev; + pci = true; + } else if (cid == PCIE_CORE_ID) { + pcieidx = i; + pcierev = crev; + pcie = true; } /* find the core idx before entering this func. */ @@ -1053,21 +999,19 @@ ai_buscore_setup(struct si_info *sii, struct chipcregs *cc, uint bustype, sii->pub.buscoretype, sii->pub.buscorerev)); /* fixup necessary chip/core configurations */ - if (sii->pub.bustype == PCI_BUS) { - if (SI_FAST(sii)) { - if (!sii->pch) { - sii->pch = (void *)pcicore_init( - &sii->pub, sii->pbus, - (void *)PCIEREGS(sii)); - if (sii->pch == NULL) - return false; - } - } - if (ai_pci_fixcfg(&sii->pub)) { - SI_ERROR(("si_doattach: si_pci_fixcfg failed\n")); - return false; + if (SI_FAST(sii)) { + if (!sii->pch) { + sii->pch = (void *)pcicore_init( + &sii->pub, sii->pbus, + (void *)PCIEREGS(sii)); + if (sii->pch == NULL) + return false; } } + if (ai_pci_fixcfg(&sii->pub)) { + SI_ERROR(("si_doattach: si_pci_fixcfg failed\n")); + return false; + } /* return to the original core */ ai_setcoreidx(&sii->pub, *origidx); @@ -1075,47 +1019,31 @@ ai_buscore_setup(struct si_info *sii, struct chipcregs *cc, uint bustype, return true; } +/* + * get boardtype and boardrev + */ static __used void ai_nvram_process(struct si_info *sii, char *pvars) { uint w = 0; - /* get boardtype and boardrev */ - switch (sii->pub.bustype) { - case PCI_BUS: - /* do a pci config read to get subsystem id and subvendor id */ - pci_read_config_dword(sii->pbus, PCI_SUBSYSTEM_VENDOR_ID, &w); - /* Let nvram variables override subsystem Vend/ID */ - sii->pub.boardvendor = (u16)ai_getdevpathintvar(&sii->pub, - "boardvendor"); - if (sii->pub.boardvendor == 0) - sii->pub.boardvendor = w & 0xffff; - else - SI_ERROR(("Overriding boardvendor: 0x%x instead of " - "0x%x\n", sii->pub.boardvendor, w & 0xffff)); - sii->pub.boardtype = (u16)ai_getdevpathintvar(&sii->pub, - "boardtype"); - if (sii->pub.boardtype == 0) - sii->pub.boardtype = (w >> 16) & 0xffff; - else - SI_ERROR(("Overriding boardtype: 0x%x instead of 0x%x\n" - , sii->pub.boardtype, (w >> 16) & 0xffff)); - break; - - sii->pub.boardvendor = getintvar(pvars, "manfid"); - sii->pub.boardtype = getintvar(pvars, "prodid"); - break; + /* do a pci config read to get subsystem id and subvendor id */ + pci_read_config_dword(sii->pbus, PCI_SUBSYSTEM_VENDOR_ID, &w); + /* Let nvram variables override subsystem Vend/ID */ + sii->pub.boardvendor = (u16)ai_getdevpathintvar(&sii->pub, + "boardvendor"); + if (sii->pub.boardvendor == 0) + sii->pub.boardvendor = w & 0xffff; + else + SI_ERROR(("Overriding boardvendor: 0x%x instead of " + "0x%x\n", sii->pub.boardvendor, w & 0xffff)); - case SI_BUS: - case JTAG_BUS: - sii->pub.boardvendor = PCI_VENDOR_ID_BROADCOM; - sii->pub.boardtype = getintvar(pvars, "prodid"); - if (pvars == NULL || (sii->pub.boardtype == 0)) { - sii->pub.boardtype = getintvar(NULL, "boardtype"); - if (sii->pub.boardtype == 0) - sii->pub.boardtype = 0xffff; - } - break; - } + sii->pub.boardtype = (u16)ai_getdevpathintvar(&sii->pub, + "boardtype"); + if (sii->pub.boardtype == 0) + sii->pub.boardtype = (w >> 16) & 0xffff; + else + SI_ERROR(("Overriding boardtype: 0x%x instead of 0x%x\n" + , sii->pub.boardtype, (w >> 16) & 0xffff)); if (sii->pub.boardtype == 0) SI_ERROR(("si_doattach: unknown board type\n")); @@ -1124,8 +1052,8 @@ static __used void ai_nvram_process(struct si_info *sii, char *pvars) } static struct si_info *ai_doattach(struct si_info *sii, - void *regs, uint bustype, void *pbus, - char **vars, uint *varsz) + void *regs, void *pbus, + char **vars, uint *varsz) { struct si_pub *sih = &sii->pub; u32 w, savewin; @@ -1143,35 +1071,18 @@ static struct si_info *ai_doattach(struct si_info *sii, sii->curmap = regs; sii->pbus = pbus; - /* check to see if we are a si core mimic'ing a pci core */ - if (bustype == PCI_BUS) { - pci_read_config_dword(sii->pbus, PCI_SPROM_CONTROL, &w); - if (w == 0xffffffff) { - SI_ERROR(("%s: incoming bus is PCI but it's a lie, " - " switching to SI devid:0x%x\n", - __func__, devid)); - bustype = SI_BUS; - } - } - /* find Chipcommon address */ - if (bustype == PCI_BUS) { - pci_read_config_dword(sii->pbus, PCI_BAR0_WIN, &savewin); - if (!GOODCOREADDR(savewin, SI_ENUM_BASE)) - savewin = SI_ENUM_BASE; - pci_write_config_dword(sii->pbus, PCI_BAR0_WIN, - SI_ENUM_BASE); - cc = (struct chipcregs *) regs; - } else { - cc = (struct chipcregs *) REG_MAP(SI_ENUM_BASE, SI_CORE_SIZE); - } + pci_read_config_dword(sii->pbus, PCI_BAR0_WIN, &savewin); + if (!GOODCOREADDR(savewin, SI_ENUM_BASE)) + savewin = SI_ENUM_BASE; - sih->bustype = bustype; + pci_write_config_dword(sii->pbus, PCI_BAR0_WIN, + SI_ENUM_BASE); + cc = (struct chipcregs *) regs; /* bus/core/clk setup for register access */ - if (!ai_buscore_prep(sii, bustype)) { - SI_ERROR(("si_doattach: si_core_clk_prep failed %d\n", - bustype)); + if (!ai_buscore_prep(sii)) { + SI_ERROR(("si_doattach: si_core_clk_prep failed\n")); return NULL; } @@ -1207,14 +1118,13 @@ static struct si_info *ai_doattach(struct si_info *sii, } /* bus/core/clk setup */ origidx = SI_CC_IDX; - if (!ai_buscore_setup(sii, cc, bustype, savewin, &origidx, regs)) { + if (!ai_buscore_setup(sii, cc, savewin, &origidx, regs)) { SI_ERROR(("si_doattach: si_buscore_setup failed\n")); goto exit; } /* Init nvram from sprom/otp if they exist */ - if (srom_var_init - (&sii->pub, bustype, regs, vars, varsz)) { + if (srom_var_init(&sii->pub, regs, vars, varsz)) { SI_ERROR(("si_doattach: srom_var_init failed: bad srom\n")); goto exit; } @@ -1283,12 +1193,11 @@ static struct si_info *ai_doattach(struct si_info *sii, } return sii; + exit: - if (sih->bustype == PCI_BUS) { - if (sii->pch) - pcicore_deinit(sii->pch); - sii->pch = NULL; - } + if (sii->pch) + pcicore_deinit(sii->pch); + sii->pch = NULL; return NULL; } @@ -1297,7 +1206,6 @@ static struct si_info *ai_doattach(struct si_info *sii, void ai_detach(struct si_pub *sih) { struct si_info *sii; - uint idx; struct si_pub *si_local = NULL; memcpy(&si_local, &sih, sizeof(struct si_pub **)); @@ -1307,18 +1215,9 @@ void ai_detach(struct si_pub *sih) if (sii == NULL) return; - if (sih->bustype == SI_BUS) - for (idx = 0; idx < SI_MAXCORES; idx++) - if (sii->regs[idx]) { - iounmap(sii->regs[idx]); - sii->regs[idx] = NULL; - } - - if (sih->bustype == PCI_BUS) { - if (sii->pch) - pcicore_deinit(sii->pch); - sii->pch = NULL; - } + if (sii->pch) + pcicore_deinit(sii->pch); + sii->pch = NULL; if (sii != &ksii) kfree(sii); @@ -1483,43 +1382,29 @@ uint ai_corereg(struct si_pub *sih, uint coreidx, uint regoff, uint mask, if (coreidx >= SI_MAXCORES) return 0; - if (sih->bustype == SI_BUS) { - /* If internal bus, we can always get at everything */ + /* + * If pci/pcie, we can get at pci/pcie regs + * and on newer cores to chipc + */ + if ((sii->coreid[coreidx] == CC_CORE_ID) && SI_FAST(sii)) { + /* Chipc registers are mapped at 12KB */ fast = true; - /* map if does not exist */ - if (!sii->regs[coreidx]) - sii->regs[coreidx] = REG_MAP(sii->coresba[coreidx], - SI_CORE_SIZE); - - r = (u32 *) ((unsigned char *) sii->regs[coreidx] + regoff); - } else if (sih->bustype == PCI_BUS) { + r = (u32 *)((char *)sii->curmap + + PCI_16KB0_CCREGS_OFFSET + regoff); + } else if (sii->pub.buscoreidx == coreidx) { /* - * If pci/pcie, we can get at pci/pcie regs - * and on newer cores to chipc + * pci registers are at either in the last 2KB of + * an 8KB window or, in pcie and pci rev 13 at 8KB */ - if ((sii->coreid[coreidx] == CC_CORE_ID) && SI_FAST(sii)) { - /* Chipc registers are mapped at 12KB */ - - fast = true; - r = (u32 *) ((char *)sii->curmap + - PCI_16KB0_CCREGS_OFFSET + regoff); - } else if (sii->pub.buscoreidx == coreidx) { - /* - * pci registers are at either in the last 2KB of - * an 8KB window or, in pcie and pci rev 13 at 8KB - */ - fast = true; - if (SI_FAST(sii)) - r = (u32 *) ((char *)sii->curmap + - PCI_16KB0_PCIREGS_OFFSET + - regoff); - else - r = (u32 *) ((char *)sii->curmap + - ((regoff >= SBCONFIGOFF) ? - PCI_BAR0_PCISBR_OFFSET : - PCI_BAR0_PCIREGS_OFFSET) + - regoff); - } + fast = true; + if (SI_FAST(sii)) + r = (u32 *)((char *)sii->curmap + + PCI_16KB0_PCIREGS_OFFSET + regoff); + else + r = (u32 *)((char *)sii->curmap + + ((regoff >= SBCONFIGOFF) ? + PCI_BAR0_PCISBR_OFFSET : + PCI_BAR0_PCIREGS_OFFSET) + regoff); } if (!fast) { @@ -1615,12 +1500,10 @@ static uint ai_slowclk_src(struct si_info *sii) u32 val; if (sii->pub.ccrev < 6) { - if (sii->pub.bustype == PCI_BUS) { - pci_read_config_dword(sii->pbus, PCI_GPIO_OUT, - &val); - if (val & PCI_CFG_GPIO_SCS) - return SCC_SS_PCI; - } + pci_read_config_dword(sii->pbus, PCI_GPIO_OUT, + &val); + if (val & PCI_CFG_GPIO_SCS) + return SCC_SS_PCI; return SCC_SS_XTAL; } else if (sii->pub.ccrev < 10) { cc = (struct chipcregs *) ai_setcoreidx(&sii->pub, sii->curidx); @@ -1791,63 +1674,56 @@ int ai_clkctl_xtal(struct si_pub *sih, uint what, bool on) sii = SI_INFO(sih); - switch (sih->bustype) { - - case PCI_BUS: - /* pcie core doesn't have any mapping to control the xtal pu */ - if (PCIE(sii)) - return -1; + /* pcie core doesn't have any mapping to control the xtal pu */ + if (PCIE(sii)) + return -1; - pci_read_config_dword(sii->pbus, PCI_GPIO_IN, &in); - pci_read_config_dword(sii->pbus, PCI_GPIO_OUT, &out); - pci_read_config_dword(sii->pbus, PCI_GPIO_OUTEN, &outen); + pci_read_config_dword(sii->pbus, PCI_GPIO_IN, &in); + pci_read_config_dword(sii->pbus, PCI_GPIO_OUT, &out); + pci_read_config_dword(sii->pbus, PCI_GPIO_OUTEN, &outen); - /* - * Avoid glitching the clock if GPRS is already using it. - * We can't actually read the state of the PLLPD so we infer it - * by the value of XTAL_PU which *is* readable via gpioin. - */ - if (on && (in & PCI_CFG_GPIO_XTAL)) - return 0; + /* + * Avoid glitching the clock if GPRS is already using it. + * We can't actually read the state of the PLLPD so we infer it + * by the value of XTAL_PU which *is* readable via gpioin. + */ + if (on && (in & PCI_CFG_GPIO_XTAL)) + return 0; - if (what & XTAL) - outen |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - outen |= PCI_CFG_GPIO_PLL; - - if (on) { - /* turn primary xtal on */ - if (what & XTAL) { - out |= PCI_CFG_GPIO_XTAL; - if (what & PLL) - out |= PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pbus, - PCI_GPIO_OUT, out); - pci_write_config_dword(sii->pbus, - PCI_GPIO_OUTEN, outen); - udelay(XTAL_ON_DELAY); - } + if (what & XTAL) + outen |= PCI_CFG_GPIO_XTAL; + if (what & PLL) + outen |= PCI_CFG_GPIO_PLL; - /* turn pll on */ - if (what & PLL) { - out &= ~PCI_CFG_GPIO_PLL; - pci_write_config_dword(sii->pbus, - PCI_GPIO_OUT, out); - mdelay(2); - } - } else { - if (what & XTAL) - out &= ~PCI_CFG_GPIO_XTAL; + if (on) { + /* turn primary xtal on */ + if (what & XTAL) { + out |= PCI_CFG_GPIO_XTAL; if (what & PLL) out |= PCI_CFG_GPIO_PLL; pci_write_config_dword(sii->pbus, PCI_GPIO_OUT, out); pci_write_config_dword(sii->pbus, PCI_GPIO_OUTEN, outen); + udelay(XTAL_ON_DELAY); } - default: - return -1; + /* turn pll on */ + if (what & PLL) { + out &= ~PCI_CFG_GPIO_PLL; + pci_write_config_dword(sii->pbus, + PCI_GPIO_OUT, out); + mdelay(2); + } + } else { + if (what & XTAL) + out &= ~PCI_CFG_GPIO_XTAL; + if (what & PLL) + out |= PCI_CFG_GPIO_PLL; + pci_write_config_dword(sii->pbus, + PCI_GPIO_OUT, out); + pci_write_config_dword(sii->pbus, + PCI_GPIO_OUTEN, outen); } return 0; @@ -1893,12 +1769,6 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) if (!fast) { INTR_OFF(sii, intr_val); origidx = sii->curidx; - - if ((sii->pub.bustype == SI_BUS) && - ai_setcore(&sii->pub, MIPS33_CORE_ID, 0) && - (ai_corerev(&sii->pub) <= 7) && (sii->pub.ccrev >= 10)) - goto done; - cc = (struct chipcregs *) ai_setcore(&sii->pub, CC_CORE_ID, 0); } else { cc = (struct chipcregs *) CCREGS_FAST(sii); @@ -1969,7 +1839,7 @@ static bool _ai_clkctl_cc(struct si_info *sii, uint mode) return mode == CLK_FAST; } -/* Build device path. Support SI, PCI, and JTAG for now. */ +/* Build device path */ int ai_devpath(struct si_pub *sih, char *path, int size) { int slen; @@ -1977,22 +1847,9 @@ int ai_devpath(struct si_pub *sih, char *path, int size) if (!path || size <= 0) return -1; - switch (sih->bustype) { - case SI_BUS: - case JTAG_BUS: - slen = snprintf(path, (size_t) size, "sb/%u/", ai_coreidx(sih)); - break; - case PCI_BUS: - slen = snprintf(path, (size_t) size, "pci/%u/%u/", - ((struct pci_dev *)((SI_INFO(sih))->pbus))->bus->number, - PCI_SLOT( - ((struct pci_dev *)((SI_INFO(sih))->pbus))->devfn)); - break; - - default: - slen = -1; - break; - } + slen = snprintf(path, (size_t) size, "pci/%u/%u/", + ((struct pci_dev *)((SI_INFO(sih))->pbus))->bus->number, + PCI_SLOT(((struct pci_dev *)((SI_INFO(sih))->pbus))->devfn)); if (slen < 0 || slen >= size) { path[0] = '\0'; @@ -2015,15 +1872,11 @@ char *ai_getdevpathvar(struct si_pub *sih, const char *name) /* Get a variable, but only if it has a devpath prefix */ int ai_getdevpathintvar(struct si_pub *sih, const char *name) { -#if defined(BCMBUSTYPE) && (BCMBUSTYPE == SI_BUS) - return getintvar(NULL, name); -#else char varname[SI_DEVPATH_BUFSZ + 32]; ai_devpathvar(sih, varname, sizeof(varname), name); return getintvar(NULL, varname); -#endif } char *ai_getnvramflvar(struct si_pub *sih, const char *name) @@ -2061,9 +1914,6 @@ static bool ai_ispcie(struct si_info *sii) { u8 cap_ptr; - if (sii->pub.bustype != PCI_BUS) - return false; - cap_ptr = pcicore_find_pci_capability(sii->pbus, PCI_CAP_ID_EXP, NULL, NULL); @@ -2088,10 +1938,6 @@ void ai_pci_up(struct si_pub *sih) sii = SI_INFO(sih); - /* if not pci bus, we're done */ - if (sih->bustype != PCI_BUS) - return; - if (PCI_FORCEHT(sii)) _ai_clkctl_cc(sii, CLK_FAST); @@ -2117,10 +1963,6 @@ void ai_pci_down(struct si_pub *sih) sii = SI_INFO(sih); - /* if not pci bus, we're done */ - if (sih->bustype != PCI_BUS) - return; - /* release FORCEHT since chip is going to "down" state */ if (PCI_FORCEHT(sii)) _ai_clkctl_cc(sii, CLK_DYNAMIC); @@ -2141,9 +1983,6 @@ void ai_pci_setup(struct si_pub *sih, uint coremask) sii = SI_INFO(sih); - if (sii->pub.bustype != PCI_BUS) - return; - if (PCI(sii)) { /* get current core index */ idx = sii->curidx; @@ -2208,18 +2047,6 @@ u32 ai_gpiocontrol(struct si_pub *sih, u32 mask, u32 val, u8 priority) { uint regoff; - regoff = 0; - - /* gpios could be shared on router platforms - * ignore reservation if it's high priority (e.g., test apps) - */ - if ((priority != GPIO_HI_PRIORITY) && - (sih->bustype == SI_BUS) && (val || mask)) { - mask = priority ? (ai_gpioreservation & mask) : - ((ai_gpioreservation | mask) & ~(ai_gpioreservation)); - val &= mask; - } - regoff = offsetof(struct chipcregs, gpiocontrol); return ai_corereg(sih, SI_CC_IDX, regoff, mask, val); } @@ -2283,13 +2110,10 @@ bool ai_deviceremoved(struct si_pub *sih) sii = SI_INFO(sih); - switch (sih->bustype) { - case PCI_BUS: - pci_read_config_dword(sii->pbus, PCI_VENDOR_ID, &w); - if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM) - return true; - break; - } + pci_read_config_dword(sii->pbus, PCI_VENDOR_ID, &w); + if ((w & 0xFFFF) != PCI_VENDOR_ID_BROADCOM) + return true; + return false; } diff --git a/drivers/staging/brcm80211/brcmsmac/aiutils.h b/drivers/staging/brcm80211/brcmsmac/aiutils.h index 4c682a5..076b4c8 100644 --- a/drivers/staging/brcm80211/brcmsmac/aiutils.h +++ b/drivers/staging/brcm80211/brcmsmac/aiutils.h @@ -330,10 +330,8 @@ #define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */ #define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */ -#define PCI(si) (((si)->pub.bustype == PCI_BUS) && \ - ((si)->pub.buscoretype == PCI_CORE_ID)) -#define PCIE(si) (((si)->pub.bustype == PCI_BUS) && \ - ((si)->pub.buscoretype == PCIE_CORE_ID)) +#define PCI(si) ((si)->pub.buscoretype == PCI_CORE_ID) +#define PCIE(si) ((si)->pub.buscoretype == PCIE_CORE_ID) #define PCI_FORCEHT(si) \ (PCIE(si) && (si->pub.chip == BCM4716_CHIP_ID)) @@ -351,7 +349,6 @@ * public (read-only) portion of aiutils handle returned by si_attach() */ struct si_pub { - uint bustype; /* SI_BUS, PCI_BUS */ uint buscoretype; /* PCI_CORE_ID, PCIE_CORE_ID, PCMCIA_CORE_ID */ uint buscorerev; /* buscore rev */ uint buscoreidx; /* buscore index */ @@ -518,9 +515,8 @@ extern u32 ai_addrspacesize(struct si_pub *sih, uint asidx); extern void ai_write_wrap_reg(struct si_pub *sih, u32 offset, u32 val); /* === exported functions === */ -extern struct si_pub *ai_attach(void *regs, uint bustype, - void *sdh, char **vars, uint *varsz); - +extern struct si_pub *ai_attach(void *regs, void *sdh, char **vars, + uint *varsz); extern void ai_detach(struct si_pub *sih); extern bool ai_pci_war16165(struct si_pub *sih); diff --git a/drivers/staging/brcm80211/brcmsmac/dma.c b/drivers/staging/brcm80211/brcmsmac/dma.c index 48a053c..64d7639 100644 --- a/drivers/staging/brcm80211/brcmsmac/dma.c +++ b/drivers/staging/brcm80211/brcmsmac/dma.c @@ -451,14 +451,11 @@ struct dma_pub *dma_attach(char *name, struct si_pub *sih, */ di->ddoffsetlow = 0; di->dataoffsetlow = 0; - /* for pci bus, add offset */ - if (sih->bustype == PCI_BUS) { - /* pcie with DMA64 */ - di->ddoffsetlow = 0; - di->ddoffsethigh = SI_PCIE_DMA_H32; - di->dataoffsetlow = di->ddoffsetlow; - di->dataoffsethigh = di->ddoffsethigh; - } + /* add offset for pcie with DMA64 bus */ + di->ddoffsetlow = 0; + di->ddoffsethigh = SI_PCIE_DMA_H32; + di->dataoffsetlow = di->ddoffsetlow; + di->dataoffsethigh = di->ddoffsethigh; #if defined(__mips__) && defined(IL_BIGENDIAN) di->dataoffsetlow = di->dataoffsetlow + SI_SDRAM_SWAPPED; #endif /* defined(__mips__) && defined(IL_BIGENDIAN) */ diff --git a/drivers/staging/brcm80211/brcmsmac/mac80211_if.c b/drivers/staging/brcm80211/brcmsmac/mac80211_if.c index c66b67f..6bcb7ea 100644 --- a/drivers/staging/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/staging/brcm80211/brcmsmac/mac80211_if.c @@ -755,7 +755,7 @@ static int brcms_set_hint(struct brcms_info *wl, char *abbrev) */ static struct brcms_info *brcms_attach(u16 vendor, u16 device, unsigned long regs, - uint bustype, void *btparam, uint irq) + void *btparam, uint irq) { struct brcms_info *wl = NULL; int unit, err; @@ -786,14 +786,6 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device, base_addr = regs; - if (bustype == PCI_BUS || bustype == RPC_BUS) { - /* Do nothing */ - } else { - bustype = PCI_BUS; - BCMMSG(wl->wiphy, "force to PCI\n"); - } - wl->bcm_bustype = bustype; - wl->regsva = ioremap_nocache(base_addr, PCI_BAR0_WINSZ); if (wl->regsva == NULL) { wiphy_err(wl->wiphy, "wl%d: ioremap() failed\n", unit); @@ -813,7 +805,7 @@ static struct brcms_info *brcms_attach(u16 vendor, u16 device, /* common load-time initialization */ wl->wlc = brcms_c_attach((void *)wl, vendor, device, unit, false, - wl->regsva, wl->bcm_bustype, btparam, &err); + wl->regsva, btparam, &err); brcms_release_fw(wl); if (!wl->wlc) { wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n", @@ -1156,7 +1148,7 @@ brcms_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) memset(hw->priv, 0, sizeof(*wl)); wl = brcms_attach(pdev->vendor, pdev->device, - pci_resource_start(pdev, 0), PCI_BUS, pdev, + pci_resource_start(pdev, 0), pdev, pdev->irq); if (!wl) { @@ -1373,8 +1365,7 @@ static void brcms_free(struct brcms_info *wl) * registers so we cannot unmap the chip registers until * after calling unregister_netdev() . */ - if (wl->regsva && wl->bcm_bustype != SDIO_BUS && - wl->bcm_bustype != JTAG_BUS) + if (wl->regsva) iounmap((void *)wl->regsva); wl->regsva = NULL; diff --git a/drivers/staging/brcm80211/brcmsmac/mac80211_if.h b/drivers/staging/brcm80211/brcmsmac/mac80211_if.h index 01fce54..c574723 100644 --- a/drivers/staging/brcm80211/brcmsmac/mac80211_if.h +++ b/drivers/staging/brcm80211/brcmsmac/mac80211_if.h @@ -60,8 +60,7 @@ struct brcms_info { spinlock_t lock; /* per-device perimeter lock */ spinlock_t isr_lock; /* per-device ISR synchronization lock */ - /* bus type and regsva for unmap in brcms_free() */ - uint bcm_bustype; /* bus type */ + /* regsva for unmap in brcms_free() */ void *regsva; /* opaque chip registers virtual address */ /* timer related fields */ diff --git a/drivers/staging/brcm80211/brcmsmac/main.c b/drivers/staging/brcm80211/brcmsmac/main.c index 2a139aa..fb9f13f 100644 --- a/drivers/staging/brcm80211/brcmsmac/main.c +++ b/drivers/staging/brcm80211/brcmsmac/main.c @@ -181,8 +181,7 @@ */ #define BCMCFID(wlc, fid) brcms_b_write_shm((wlc)->hw, M_BCMC_FID, (fid)) -#define BRCMS_WAR16165(wlc) (wlc->pub->sih->bustype == PCI_BUS && \ - (!AP_ENAB(wlc->pub)) && (wlc->war16165)) +#define BRCMS_WAR16165(wlc) ((!AP_ENAB(wlc->pub)) && (wlc->war16165)) /* Find basic rate for a given rate */ #define BRCMS_BASIC_RATE(wlc, rspec) \ @@ -313,8 +312,8 @@ static void brcms_b_tx_fifo_resume(struct brcms_hardware *wlc_hw, struct brcms_b_state; static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, - uint unit, bool piomode, void *regsva, uint bustype, - void *btparam); + uint unit, bool piomode, void *regsva, + void *btparam); /* up/down, reset, clk */ static void brcms_b_reset(struct brcms_hardware *wlc_hw); @@ -4302,7 +4301,7 @@ struct brcms_pub *brcms_c_pub(void *wlc) * put the whole chip in reset(driver down state), no clock */ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, - bool piomode, void *regsva, uint bustype, void *btparam) + bool piomode, void *regsva, void *btparam) { struct brcms_hardware *wlc_hw; struct d11regs *regs; @@ -4313,6 +4312,8 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, bool wme = false; struct shared_phy_params sha_params; struct wiphy *wiphy = wlc->wiphy; + char *var; + unsigned long res; BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, vendor, device); @@ -4332,7 +4333,7 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, * Do the hardware portion of the attach. Also initialize software * state that depends on the particular hardware we are running. */ - wlc_hw->sih = ai_attach(regsva, bustype, btparam, + wlc_hw->sih = ai_attach(regsva, btparam, &wlc_hw->vars, &wlc_hw->vars_size); if (wlc_hw->sih == NULL) { wiphy_err(wiphy, "wl%d: brcms_b_attach: si_attach failed\n", @@ -4347,37 +4348,29 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, * than those the BIOS recognizes for devices on PCMCIA_BUS, * SDIO_BUS, and SROMless devices on PCI_BUS. */ -#ifdef BCMBUSTYPE - bustype = BCMBUSTYPE; -#endif - if (bustype != SI_BUS) { - char *var; - unsigned long res; - - var = getvar(vars, "vendid"); - if (var && !kstrtoul(var, 0, &res)) { - vendor = (u16)res; - wiphy_err(wiphy, "Overriding vendor id = 0x%x\n", - vendor); - } - var = getvar(vars, "devid"); - if (var && !kstrtoul(var, 0, &res)) { - u16 devid = (u16)res; - if (devid != 0xffff) { - device = devid; - wiphy_err(wiphy, "Overriding device id = 0x%x" - "\n", device); - } + var = getvar(vars, "vendid"); + if (var && !kstrtoul(var, 0, &res)) { + vendor = (u16)res; + wiphy_err(wiphy, "Overriding vendor id = 0x%x\n", + vendor); + } + var = getvar(vars, "devid"); + if (var && !kstrtoul(var, 0, &res)) { + u16 devid = (u16)res; + if (devid != 0xffff) { + device = devid; + wiphy_err(wiphy, "Overriding device id = 0x%x" + "\n", device); } + } - /* verify again the device is supported */ - if (!brcms_c_chipmatch(vendor, device)) { - wiphy_err(wiphy, "wl%d: brcms_b_attach: Unsupported " - "vendor/device (0x%x/0x%x)\n", - unit, vendor, device); - err = 12; - goto fail; - } + /* verify again the device is supported */ + if (!brcms_c_chipmatch(vendor, device)) { + wiphy_err(wiphy, "wl%d: brcms_b_attach: Unsupported " + "vendor/device (0x%x/0x%x)\n", + unit, vendor, device); + err = 12; + goto fail; } wlc_hw->vendorid = vendor; @@ -4437,8 +4430,7 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, if (wlc_hw->boardflags & BFL_NOPLLDOWN) brcms_b_pllreq(wlc_hw, true, BRCMS_PLLREQ_SHARED); - if ((wlc_hw->sih->bustype == PCI_BUS) - && (ai_pci_war16165(wlc_hw->sih))) + if (ai_pci_war16165(wlc_hw->sih)) wlc->war16165 = true; /* check device id(srom, nvram etc.) to set bands */ @@ -4491,7 +4483,6 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, sha_params.boardvendor = wlc_hw->sih->boardvendor; sha_params.boardflags = wlc_hw->boardflags; sha_params.boardflags2 = wlc_hw->boardflags2; - sha_params.bustype = wlc_hw->sih->bustype; sha_params.buscorerev = wlc_hw->sih->buscorerev; /* alloc and save pointer to shared phy state area */ @@ -4601,8 +4592,7 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, brcms_c_coredisable(wlc_hw); /* Match driver "down" state */ - if (wlc_hw->sih->bustype == PCI_BUS) - ai_pci_down(wlc_hw->sih); + ai_pci_down(wlc_hw->sih); /* register sb interrupt callback functions */ ai_register_intr_callback(wlc_hw->sih, (void *)brcms_c_wlintrsoff, @@ -4655,8 +4645,7 @@ int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device, uint unit, * The common driver entry routine. Error codes should be unique */ void *brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit, - bool piomode, void *regsva, uint bustype, void *btparam, - uint *perr) + bool piomode, void *regsva, void *btparam, uint *perr) { struct brcms_c_info *wlc; uint err = 0; @@ -4696,7 +4685,7 @@ void *brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit, * inside, no more in rest of the attach) */ err = brcms_b_attach(wlc, vendor, device, unit, piomode, regsva, - bustype, btparam); + btparam); if (err) goto fail; @@ -5030,9 +5019,7 @@ int brcms_b_detach(struct brcms_c_info *wlc) * be done before sb core switch */ ai_deregister_intr_callback(wlc_hw->sih); - - if (wlc_hw->sih->bustype == PCI_BUS) - ai_pci_sleep(wlc_hw->sih); + ai_pci_sleep(wlc_hw->sih); } brcms_b_detach_dmapio(wlc_hw); @@ -5416,18 +5403,16 @@ void brcms_b_hw_up(struct brcms_hardware *wlc_hw) ai_clkctl_init(wlc_hw->sih); brcms_b_clkctl_clk(wlc_hw, CLK_FAST); - if (wlc_hw->sih->bustype == PCI_BUS) { - ai_pci_fixcfg(wlc_hw->sih); + ai_pci_fixcfg(wlc_hw->sih); - /* - * AI chip doesn't restore bar0win2 on - * hibernation/resume, need sw fixup - */ - if ((wlc_hw->sih->chip == BCM43224_CHIP_ID) || - (wlc_hw->sih->chip == BCM43225_CHIP_ID)) - wlc_hw->regs = (struct d11regs *) - ai_setcore(wlc_hw->sih, D11_CORE_ID, 0); - } + /* + * AI chip doesn't restore bar0win2 on + * hibernation/resume, need sw fixup + */ + if ((wlc_hw->sih->chip == BCM43224_CHIP_ID) || + (wlc_hw->sih->chip == BCM43225_CHIP_ID)) + wlc_hw->regs = (struct d11regs *) + ai_setcore(wlc_hw->sih, D11_CORE_ID, 0); /* * Inform phy that a POR reset has occurred so @@ -5467,8 +5452,7 @@ int brcms_b_up_prep(struct brcms_hardware *wlc_hw) */ coremask = (1 << wlc_hw->wlc->core->coreidx); - if (wlc_hw->sih->bustype == PCI_BUS) - ai_pci_setup(wlc_hw->sih, coremask); + ai_pci_setup(wlc_hw->sih, coremask); /* * Need to read the hwradio status here to cover the case where the @@ -5477,14 +5461,12 @@ int brcms_b_up_prep(struct brcms_hardware *wlc_hw) */ if (brcms_b_radio_read_hwdisabled(wlc_hw)) { /* put SB PCI in down state again */ - if (wlc_hw->sih->bustype == PCI_BUS) - ai_pci_down(wlc_hw->sih); + ai_pci_down(wlc_hw->sih); brcms_b_xtal(wlc_hw, OFF); return -ENOMEDIUM; } - if (wlc_hw->sih->bustype == PCI_BUS) - ai_pci_up(wlc_hw->sih); + ai_pci_up(wlc_hw->sih); /* reset the d11 core */ brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS); @@ -5707,8 +5689,7 @@ int brcms_b_down_finish(struct brcms_hardware *wlc_hw) /* turn off primary xtal and pll */ if (!wlc_hw->noreset) { - if (wlc_hw->sih->bustype == PCI_BUS) - ai_pci_down(wlc_hw->sih); + ai_pci_down(wlc_hw->sih); brcms_b_xtal(wlc_hw, OFF); } } diff --git a/drivers/staging/brcm80211/brcmsmac/nicpci.c b/drivers/staging/brcm80211/brcmsmac/nicpci.c index ab67546..8249ea9 100644 --- a/drivers/staging/brcm80211/brcmsmac/nicpci.c +++ b/drivers/staging/brcm80211/brcmsmac/nicpci.c @@ -213,9 +213,7 @@ struct pcicore_info { /* debug/trace */ #define PCI_ERROR(args) -#define PCIE_PUB(sih) \ - (((sih)->bustype == PCI_BUS) && \ - ((sih)->buscoretype == PCIE_CORE_ID)) +#define PCIE_PUB(sih) ((sih)->buscoretype == PCIE_CORE_ID) /* routines to access mdio slave device registers */ static bool pcie_mdiosetblock(struct pcicore_info *pi, uint blk); diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c index 831c2fe..c00178d 100644 --- a/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c +++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c @@ -279,11 +279,9 @@ void write_radio_reg(struct brcms_phy *pi, u16 addr, u16 val) W_REG(&pi->regs->phy4wdatalo, val); } - if (pi->sh->bustype == PCI_BUS) { - if (++pi->phy_wreg >= pi->phy_wreg_limit) { - (void)R_REG(&pi->regs->maccontrol); - pi->phy_wreg = 0; - } + if (++pi->phy_wreg >= pi->phy_wreg_limit) { + (void)R_REG(&pi->regs->maccontrol); + pi->phy_wreg = 0; } } @@ -390,11 +388,9 @@ void write_phy_reg(struct brcms_phy *pi, u16 addr, u16 val) #else W_REG((u32 *)(®s->phyregaddr), addr | (val << 16)); - if (pi->sh->bustype == PCI_BUS) { - if (++pi->phy_wreg >= pi->phy_wreg_limit) { - pi->phy_wreg = 0; - (void)R_REG(®s->phyversion); - } + if (++pi->phy_wreg >= pi->phy_wreg_limit) { + pi->phy_wreg = 0; + (void)R_REG(®s->phyversion); } #endif } @@ -496,7 +492,6 @@ struct shared_phy *wlc_phy_shared_attach(struct shared_phy_params *shp) sh->boardvendor = shp->boardvendor; sh->boardflags = shp->boardflags; sh->boardflags2 = shp->boardflags2; - sh->bustype = shp->bustype; sh->buscorerev = shp->buscorerev; sh->fast_timer = PHY_SW_TIMER_FAST; diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h b/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h index 42e0cf0..1dbfaa3 100644 --- a/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h +++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_hal.h @@ -166,7 +166,6 @@ struct shared_phy_params { struct phy_shim_info *physhim; uint unit; uint corerev; - uint bustype; uint buscorerev; char *vars; u16 vid; diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h b/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h index bcc6d83..b98d76b 100644 --- a/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h +++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_int.h @@ -565,7 +565,6 @@ struct shared_phy { uint boardvendor; u32 boardflags; u32 boardflags2; - uint bustype; uint buscorerev; uint fast_timer; uint slow_timer; @@ -1182,7 +1181,7 @@ extern void wlc_phy_table_write_nphy(struct brcms_phy *pi, u32, u32, u32, (pi->ipa5g_on && CHSPEC_IS5G(pi->radio_chanspec))) #define BRCMS_PHY_WAR_PR51571(pi) \ - if (((pi)->sh->bustype == PCI_BUS) && NREV_LT((pi)->pubpi.phy_rev, 3)) \ + if (NREV_LT((pi)->pubpi.phy_rev, 3)) \ (void)R_REG(&(pi)->regs->maccontrol) extern void wlc_phy_cal_perical_nphy_run(struct brcms_phy *pi, u8 caltype); diff --git a/drivers/staging/brcm80211/brcmsmac/pub.h b/drivers/staging/brcm80211/brcmsmac/pub.h index 8da7250..5e15c67 100644 --- a/drivers/staging/brcm80211/brcmsmac/pub.h +++ b/drivers/staging/brcm80211/brcmsmac/pub.h @@ -550,7 +550,7 @@ struct brcms_antselcfg { /* common functions for every port */ extern void *brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, - uint unit, bool piomode, void *regsva, uint bustype, + uint unit, bool piomode, void *regsva, void *btparam, uint *perr); extern uint brcms_c_detach(struct brcms_c_info *wlc); extern int brcms_c_up(struct brcms_c_info *wlc); diff --git a/drivers/staging/brcm80211/brcmsmac/srom.c b/drivers/staging/brcm80211/brcmsmac/srom.c index 40a3156..060f06f 100644 --- a/drivers/staging/brcm80211/brcmsmac/srom.c +++ b/drivers/staging/brcm80211/brcmsmac/srom.c @@ -860,8 +860,7 @@ static int varbuf_append(struct brcms_varbuf *b, const char *fmt, ...) * Initialize local vars from the right source for this platform. * Return 0 on success, nonzero on error. */ -int srom_var_init(struct si_pub *sih, uint bustype, void *curmap, - char **vars, uint *count) +int srom_var_init(struct si_pub *sih, void *curmap, char **vars, uint *count) { uint len; @@ -873,7 +872,7 @@ int srom_var_init(struct si_pub *sih, uint bustype, void *curmap, *vars = NULL; *count = 0; - if (curmap != NULL && bustype == PCI_BUS) + if (curmap != NULL) return initvars_srom_pci(sih, curmap, vars, count); return -EINVAL; diff --git a/drivers/staging/brcm80211/brcmsmac/srom.h b/drivers/staging/brcm80211/brcmsmac/srom.h index efc4d1e..dd51156 100644 --- a/drivers/staging/brcm80211/brcmsmac/srom.h +++ b/drivers/staging/brcm80211/brcmsmac/srom.h @@ -20,8 +20,8 @@ #include "types.h" /* Prototypes */ -extern int srom_var_init(struct si_pub *sih, uint bus, void *curmap, - char **vars, uint *count); +extern int srom_var_init(struct si_pub *sih, void *curmap, char **vars, + uint *count); extern int srom_read(struct si_pub *sih, uint bus, void *curmap, uint byteoff, uint nbytes, u16 *buf, bool check_crc); diff --git a/drivers/staging/brcm80211/brcmsmac/types.h b/drivers/staging/brcm80211/brcmsmac/types.h index 16a1c6a..c0d41cc 100644 --- a/drivers/staging/brcm80211/brcmsmac/types.h +++ b/drivers/staging/brcm80211/brcmsmac/types.h @@ -20,14 +20,13 @@ #include #include +#if 0 /* Bus types */ -#define SI_BUS 0 /* SOC Interconnect */ -#define PCI_BUS 1 /* PCI target */ #define SDIO_BUS 3 /* SDIO target */ -#define JTAG_BUS 4 /* JTAG */ #define USB_BUS 5 /* USB (does not support R/W REG) */ #define SPI_BUS 6 /* gSPI target */ #define RPC_BUS 7 /* RPC target */ +#endif #define WL_CHAN_FREQ_RANGE_2G 0 #define WL_CHAN_FREQ_RANGE_5GL 1