From: Marek Szyprowski Date: Fri, 20 Nov 2020 08:56:36 +0000 (+0100) Subject: phy: samsung: Add support for the Exynos5420 variant of the USB2 PHY X-Git-Tag: accepted/tizen/unified/20230118.172025~8316^2~40^2~22 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=81b534f7e9b27309b99ac2b870518c17381d2912;p=platform%2Fkernel%2Flinux-rpi.git phy: samsung: Add support for the Exynos5420 variant of the USB2 PHY Exynos5420 differs a bit from Exynos5250 in USB2 PHY related registers in the PMU region. Add a variant for the Exynos5420 case. Till now, USB2 PHY worked only because the bootloader enabled the PHY, but then driver messed USB 3.0 DRD related registers during the suspend/resume cycle. Signed-off-by: Marek Szyprowski Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20201120085637.7299-2-m.szyprowski@samsung.com Signed-off-by: Vinod Koul --- diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 7510830..8f51aee 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -47,6 +47,7 @@ Required properties: - "samsung,exynos4210-usb2-phy" - "samsung,exynos4x12-usb2-phy" - "samsung,exynos5250-usb2-phy" + - "samsung,exynos5420-usb2-phy" - "samsung,s5pv210-usb2-phy" - reg : a list of registers used by phy driver - first and obligatory is the location of phy modules registers diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig index e20d2fc..0f51d3b 100644 --- a/drivers/phy/samsung/Kconfig +++ b/drivers/phy/samsung/Kconfig @@ -64,7 +64,12 @@ config PHY_EXYNOS4X12_USB2 config PHY_EXYNOS5250_USB2 bool depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS5250 || SOC_EXYNOS5420 + default SOC_EXYNOS5250 + +config PHY_EXYNOS5420_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS5420 config PHY_S5PV210_USB2 bool "Support for S5PV210" diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c index 4f53b71..e198010 100644 --- a/drivers/phy/samsung/phy-exynos5250-usb2.c +++ b/drivers/phy/samsung/phy-exynos5250-usb2.c @@ -117,9 +117,9 @@ /* Isolation, configured in the power management unit */ #define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704 -#define EXYNOS_5250_USB_ISOL_OTG BIT(0) #define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708 -#define EXYNOS_5250_USB_ISOL_HOST BIT(0) +#define EXYNOS_5420_USB_ISOL_HOST_OFFSET 0x70C +#define EXYNOS_5250_USB_ISOL_ENABLE BIT(0) /* Mode swtich register */ #define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230 @@ -132,7 +132,6 @@ enum exynos4x12_phy_id { EXYNOS5250_HOST, EXYNOS5250_HSIC0, EXYNOS5250_HSIC1, - EXYNOS5250_NUM_PHYS, }; /* @@ -176,20 +175,19 @@ static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on) { struct samsung_usb2_phy_driver *drv = inst->drv; u32 offset; - u32 mask; + u32 mask = EXYNOS_5250_USB_ISOL_ENABLE; - switch (inst->cfg->id) { - case EXYNOS5250_DEVICE: + if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_DEVICE) offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET; - mask = EXYNOS_5250_USB_ISOL_OTG; - break; - case EXYNOS5250_HOST: + else if (drv->cfg == &exynos5250_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET; - mask = EXYNOS_5250_USB_ISOL_HOST; - break; - default: + else if (drv->cfg == &exynos5420_usb2_phy_config && + inst->cfg->id == EXYNOS5250_HOST) + offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET; + else return; - } regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); } @@ -390,9 +388,31 @@ static const struct samsung_usb2_common_phy exynos5250_phys[] = { }, }; +static const struct samsung_usb2_common_phy exynos5420_phys[] = { + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, +}; + const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = { .has_mode_switch = 1, - .num_phys = EXYNOS5250_NUM_PHYS, + .num_phys = ARRAY_SIZE(exynos5250_phys), .phys = exynos5250_phys, .rate_to_clk = exynos5250_rate_to_clk, }; + +const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = ARRAY_SIZE(exynos5420_phys), + .phys = exynos5420_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c index f79f605..3908153 100644 --- a/drivers/phy/samsung/phy-samsung-usb2.c +++ b/drivers/phy/samsung/phy-samsung-usb2.c @@ -128,6 +128,12 @@ static const struct of_device_id samsung_usb2_phy_of_match[] = { .data = &exynos5250_usb2_phy_config, }, #endif +#ifdef CONFIG_PHY_EXYNOS5420_USB2 + { + .compatible = "samsung,exynos5420-usb2-phy", + .data = &exynos5420_usb2_phy_config, + }, +#endif #ifdef CONFIG_PHY_S5PV210_USB2 { .compatible = "samsung,s5pv210-usb2-phy", diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h index 77fb23b..ebaf43b 100644 --- a/drivers/phy/samsung/phy-samsung-usb2.h +++ b/drivers/phy/samsung/phy-samsung-usb2.h @@ -66,5 +66,6 @@ extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config; extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config; extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config; extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5420_usb2_phy_config; extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config; #endif