From: Anton Vorontsov Date: Tue, 22 Sep 2009 23:45:13 +0000 (-0700) Subject: sdhci-of: fix high-speed cards recognition X-Git-Tag: v2.6.32-rc1~331 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=81b39802468fe4bf5c6b038837319b608acfdd3e;p=platform%2Fkernel%2Flinux-exynos.git sdhci-of: fix high-speed cards recognition eSDHC fails to recognize some SDHS cards, throwing timeout errors: mmc0: error -110 whilst initialising SD card That's because we calculate timeout value in a wrong way: on eSDHC hosts the timeout clock is derivied from the SD clock, which is set dynamically. As David Vrabel suggested, deriving timeout clock from SD clock is a common scheme, so let's implement DATA_TIMEOUT_USES_SDCLK quirk and use it for eSDHC hosts. Also, from now on we don't need esdhc_get_timeout_clock() callback, so remove it. Signed-off-by: Anton Vorontsov Cc: Pierre Ossman Cc: Kumar Gala Cc: David Vrabel Cc: Ben Dooks Cc: Sascha Hauer Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index 3439fc1..56041dc 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c @@ -172,19 +172,13 @@ static unsigned int esdhc_get_min_clock(struct sdhci_host *host) return of_host->clock / 256 / 16; } -static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host) -{ - struct sdhci_of_host *of_host = sdhci_priv(host); - - return of_host->clock / 1000; -} - static struct sdhci_of_data sdhci_esdhc = { .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 | SDHCI_QUIRK_BROKEN_CARD_DETECTION | SDHCI_QUIRK_INVERTED_WRITE_PROTECT | SDHCI_QUIRK_NO_BUSY_IRQ | SDHCI_QUIRK_NONSTANDARD_CLOCK | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | SDHCI_QUIRK_PIO_NEEDS_DELAY | SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | SDHCI_QUIRK_NO_CARD_NO_RESET, @@ -199,7 +193,6 @@ static struct sdhci_of_data sdhci_esdhc = { .enable_dma = esdhc_enable_dma, .get_max_clock = esdhc_get_max_clock, .get_min_clock = esdhc_get_min_clock, - .get_timeout_clock = esdhc_get_timeout_clock, }, }; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 7f7f45b..38a7874 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -591,6 +591,9 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) target_timeout = data->timeout_ns / 1000 + data->timeout_clks / host->clock; + if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK) + host->timeout_clk = host->clock / 1000; + /* * Figure out needed cycles. * We do this in steps in order to fit inside a 32 bit int. @@ -1757,13 +1760,15 @@ int sdhci_add_host(struct sdhci_host *host) host->timeout_clk = (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT; if (host->timeout_clk == 0) { - if (!host->ops->get_timeout_clock) { + if (host->ops->get_timeout_clock) { + host->timeout_clk = host->ops->get_timeout_clock(host); + } else if (!(host->quirks & + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { printk(KERN_ERR "%s: Hardware doesn't specify timeout clock " "frequency.\n", mmc_hostname(mmc)); return -ENODEV; } - host->timeout_clk = host->ops->get_timeout_clock(host); } if (caps & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index c77e9ff..afda7f1 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -232,6 +232,8 @@ struct sdhci_host { #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) /* Controller needs 10ms delay between applying power and clock */ #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) +/* Controller uses SDCLK instead of TMCLK for data timeouts */ +#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */