From: H Hartley Sweeten Date: Fri, 9 Oct 2015 18:09:34 +0000 (-0700) Subject: staging: comedi: adl_pci9118: prefer using the BIT macro X-Git-Tag: v4.14-rc1~4420^2~821 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=7db6ed68cae2c5b24d2a41a085c42f092efc3c93;p=platform%2Fkernel%2Flinux-rpi.git staging: comedi: adl_pci9118: prefer using the BIT macro As suggested by checkpatch.pl, use the BIT macro to define the register bits. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c index fb3043d..8774698 100644 --- a/drivers/staging/comedi/drivers/adl_pci9118.c +++ b/drivers/staging/comedi/drivers/adl_pci9118.c @@ -96,24 +96,24 @@ #define PCI9118_AI_FIFO_REG 0x10 #define PCI9118_AO_REG(x) (0x10 + ((x) * 4)) #define PCI9118_AI_STATUS_REG 0x18 -#define PCI9118_AI_STATUS_NFULL (1 << 8) /* 0=FIFO full (fatal) */ -#define PCI9118_AI_STATUS_NHFULL (1 << 7) /* 0=FIFO half full */ -#define PCI9118_AI_STATUS_NEPTY (1 << 6) /* 0=FIFO empty */ -#define PCI9118_AI_STATUS_ACMP (1 << 5) /* 1=about trigger complete */ -#define PCI9118_AI_STATUS_DTH (1 << 4) /* 1=ext. digital trigger */ -#define PCI9118_AI_STATUS_BOVER (1 << 3) /* 1=burst overrun (fatal) */ -#define PCI9118_AI_STATUS_ADOS (1 << 2) /* 1=A/D over speed (warn) */ -#define PCI9118_AI_STATUS_ADOR (1 << 1) /* 1=A/D overrun (fatal) */ -#define PCI9118_AI_STATUS_ADRDY (1 << 0) /* 1=A/D ready */ +#define PCI9118_AI_STATUS_NFULL BIT(8) /* 0=FIFO full (fatal) */ +#define PCI9118_AI_STATUS_NHFULL BIT(7) /* 0=FIFO half full */ +#define PCI9118_AI_STATUS_NEPTY BIT(6) /* 0=FIFO empty */ +#define PCI9118_AI_STATUS_ACMP BIT(5) /* 1=about trigger complete */ +#define PCI9118_AI_STATUS_DTH BIT(4) /* 1=ext. digital trigger */ +#define PCI9118_AI_STATUS_BOVER BIT(3) /* 1=burst overrun (fatal) */ +#define PCI9118_AI_STATUS_ADOS BIT(2) /* 1=A/D over speed (warn) */ +#define PCI9118_AI_STATUS_ADOR BIT(1) /* 1=A/D overrun (fatal) */ +#define PCI9118_AI_STATUS_ADRDY BIT(0) /* 1=A/D ready */ #define PCI9118_AI_CTRL_REG 0x18 -#define PCI9118_AI_CTRL_UNIP (1 << 7) /* 1=unipolar */ -#define PCI9118_AI_CTRL_DIFF (1 << 6) /* 1=differential inputs */ -#define PCI9118_AI_CTRL_SOFTG (1 << 5) /* 1=8254 software gate */ -#define PCI9118_AI_CTRL_EXTG (1 << 4) /* 1=8254 TGIN(pin 46) gate */ -#define PCI9118_AI_CTRL_EXTM (1 << 3) /* 1=ext. trigger (pin 44) */ -#define PCI9118_AI_CTRL_TMRTR (1 << 2) /* 1=8254 is trigger source */ -#define PCI9118_AI_CTRL_INT (1 << 1) /* 1=enable interrupt */ -#define PCI9118_AI_CTRL_DMA (1 << 0) /* 1=enable DMA */ +#define PCI9118_AI_CTRL_UNIP BIT(7) /* 1=unipolar */ +#define PCI9118_AI_CTRL_DIFF BIT(6) /* 1=differential inputs */ +#define PCI9118_AI_CTRL_SOFTG BIT(5) /* 1=8254 software gate */ +#define PCI9118_AI_CTRL_EXTG BIT(4) /* 1=8254 TGIN(pin 46) gate */ +#define PCI9118_AI_CTRL_EXTM BIT(3) /* 1=ext. trigger (pin 44) */ +#define PCI9118_AI_CTRL_TMRTR BIT(2) /* 1=8254 is trigger source */ +#define PCI9118_AI_CTRL_INT BIT(1) /* 1=enable interrupt */ +#define PCI9118_AI_CTRL_DMA BIT(0) /* 1=enable DMA */ #define PCI9118_DIO_REG 0x1c #define PCI9118_SOFTTRG_REG 0x20 #define PCI9118_AI_CHANLIST_REG 0x24 @@ -122,20 +122,20 @@ #define PCI9118_AI_BURST_NUM_REG 0x28 #define PCI9118_AI_AUTOSCAN_MODE_REG 0x2c #define PCI9118_AI_CFG_REG 0x30 -#define PCI9118_AI_CFG_PDTRG (1 << 7) /* 1=positive trigger */ -#define PCI9118_AI_CFG_PETRG (1 << 6) /* 1=positive ext. trigger */ -#define PCI9118_AI_CFG_BSSH (1 << 5) /* 1=with sample & hold */ -#define PCI9118_AI_CFG_BM (1 << 4) /* 1=burst mode */ -#define PCI9118_AI_CFG_BS (1 << 3) /* 1=burst mode start */ -#define PCI9118_AI_CFG_PM (1 << 2) /* 1=post trigger */ -#define PCI9118_AI_CFG_AM (1 << 1) /* 1=about trigger */ -#define PCI9118_AI_CFG_START (1 << 0) /* 1=trigger start */ +#define PCI9118_AI_CFG_PDTRG BIT(7) /* 1=positive trigger */ +#define PCI9118_AI_CFG_PETRG BIT(6) /* 1=positive ext. trigger */ +#define PCI9118_AI_CFG_BSSH BIT(5) /* 1=with sample & hold */ +#define PCI9118_AI_CFG_BM BIT(4) /* 1=burst mode */ +#define PCI9118_AI_CFG_BS BIT(3) /* 1=burst mode start */ +#define PCI9118_AI_CFG_PM BIT(2) /* 1=post trigger */ +#define PCI9118_AI_CFG_AM BIT(1) /* 1=about trigger */ +#define PCI9118_AI_CFG_START BIT(0) /* 1=trigger start */ #define PCI9118_FIFO_RESET_REG 0x34 #define PCI9118_INT_CTRL_REG 0x38 -#define PCI9118_INT_CTRL_TIMER (1 << 3) /* timer interrupt */ -#define PCI9118_INT_CTRL_ABOUT (1 << 2) /* about trigger complete */ -#define PCI9118_INT_CTRL_HFULL (1 << 1) /* A/D FIFO half full */ -#define PCI9118_INT_CTRL_DTRG (1 << 0) /* ext. digital trigger */ +#define PCI9118_INT_CTRL_TIMER BIT(3) /* timer interrupt */ +#define PCI9118_INT_CTRL_ABOUT BIT(2) /* about trigger complete */ +#define PCI9118_INT_CTRL_HFULL BIT(1) /* A/D FIFO half full */ +#define PCI9118_INT_CTRL_DTRG BIT(0) /* ext. digital trigger */ #define START_AI_EXT 0x01 /* start measure on external trigger */ #define STOP_AI_EXT 0x02 /* stop measure on external trigger */