From: Marcel Ziswiler Date: Sat, 22 Oct 2022 21:59:42 +0000 (+0200) Subject: imx28: synchronise device tree with linux X-Git-Tag: v2023.07~287^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=7d08ddd09b75e7a3c103cc0d0d3ed700287f268e;p=platform%2Fkernel%2Fu-boot.git imx28: synchronise device tree with linux Synchronise device tree with linux v6.0-rc1. Signed-off-by: Marcel Ziswiler --- diff --git a/arch/arm/dts/imx28-evk.dts b/arch/arm/dts/imx28-evk.dts index 7e2b0f1..1053b7c 100644 --- a/arch/arm/dts/imx28-evk.dts +++ b/arch/arm/dts/imx28-evk.dts @@ -129,7 +129,7 @@ pinctrl-0 = <&spi2_pins_a>; status = "okay"; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf016b", "jedec,spi-nor"; diff --git a/arch/arm/dts/imx28-lwe.dtsi b/arch/arm/dts/imx28-lwe.dtsi new file mode 100644 index 0000000..bb971e6 --- /dev/null +++ b/arch/arm/dts/imx28-lwe.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2021 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx28.dtsi" + +/ { + aliases { + spi2 = &ssp3; + }; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1"; + }; + + memory@40000000 { + reg = <0x40000000 0x08000000>; + }; + + reg_3v3: regulator-reg-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_5v: regulator-reg-usb-5v { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_fec_3v3: regulator-reg-fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + #sound-dai-cells = <0>; + assigned-clocks = <&clks 53>; + assigned-clock-rates = <12000000>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&spi3_pins_a { + fsl,pinmux-ids = < + MX28_PAD_AUART2_RX__SSP3_D4 + MX28_PAD_AUART2_TX__SSP3_D5 + MX28_PAD_SSP3_SCK__SSP3_SCK + MX28_PAD_SSP3_MOSI__SSP3_CMD + MX28_PAD_SSP3_MISO__SSP3_D0 + MX28_PAD_SSP3_SS0__SSP3_D3 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a>; + bus-width = <8>; + vmmc-supply = <®_3v3>; + non-removable; + status = "okay"; +}; + +&ssp2 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; +}; + +&ssp3 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_a>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <40000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0x80000>; + read-only; + }; + + partition@80000 { + label = "env0"; + reg = <0x80000 0x10000>; + }; + + partition@90000 { + label = "env1"; + reg = <0x90000 0x10000>; + }; + + partition@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + partition@500000 { + label = "swupdate"; + reg = <0x500000 0x800000>; + }; + }; + }; +}; + +&usb0 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_b>; + dr_mode = "host"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx28-pinfunc.h b/arch/arm/dts/imx28-pinfunc.h index e11f69b..d427e6c 100644 --- a/arch/arm/dts/imx28-pinfunc.h +++ b/arch/arm/dts/imx28-pinfunc.h @@ -1,14 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Header providing constants for i.MX28 pinctrl bindings. * * Copyright (C) 2013 Lothar Waßmann - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DT_BINDINGS_MX28_PINCTRL_H__ diff --git a/arch/arm/dts/imx28-xea.dts b/arch/arm/dts/imx28-xea.dts index f4b503c..a400c10 100644 --- a/arch/arm/dts/imx28-xea.dts +++ b/arch/arm/dts/imx28-xea.dts @@ -1,143 +1,99 @@ -// SPDX-License-Identifier: GPL-2.0+ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2019 + * Copyright 2021 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ or X11 - * */ /dts-v1/; - -#include "imx28.dtsi" +#include "imx28-lwe.dtsi" / { - model = "Liebherr (LWE) XEA i.MX28 Board"; - compatible = "lwe,xea", "fsl,imx28"; - - aliases { - spi3 = &ssp3; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x10000000>; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_fec_3v3: regulator-fec-3v3 { - compatible = "regulator-fixed"; - regulator-name = "fec-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; - - reg_usb_5v: regulator-usb-5v { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + compatible = "lwn,imx28-xea", "fsl,imx28"; }; -&mac0 { - phy-mode = "rmii"; +&can0 { pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; - phy-supply = <®_fec_3v3>; - phy-reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - phy-reset-post-delay = <1>; + pinctrl-0 = <&can1_pins_a>; status = "okay"; - - fixed-link { - speed = <100>; - full-duplex; - }; }; -&ssp0 { - compatible = "fsl,imx28-mmc"; +&i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a>; - bus-width = <8>; - vmmc-supply = <®_3p3v>; - non-removable; + pinctrl-0 = <&i2c1_pins_b>; status = "okay"; }; -&ssp3 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; +&pinctrl { pinctrl-names = "default"; - pinctrl-0 = <&spi3_pins_b>; - status = "okay"; - spi-max-frequency = <40000000>; - num-cs = <2>; + pinctrl-0 = <&hog_pins_a &hog_pins_tiva>; - flash0: s25fl256s@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <40000000>; + hog_pins_a: hog@0 { reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D00__GPIO_0_0 + MX28_PAD_GPMI_D02__GPIO_0_2 + MX28_PAD_GPMI_D05__GPIO_0_5 + MX28_PAD_GPMI_CE1N__GPIO_0_17 + MX28_PAD_GPMI_RDY0__GPIO_0_20 + MX28_PAD_GPMI_RDY1__GPIO_0_21 + MX28_PAD_GPMI_RDY2__GPIO_0_22 + MX28_PAD_GPMI_RDN__GPIO_0_24 + MX28_PAD_GPMI_CLE__GPIO_0_27 + MX28_PAD_LCD_VSYNC__GPIO_1_28 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP2_SS1__GPIO_2_20 + MX28_PAD_SSP2_SS2__GPIO_2_21 + MX28_PAD_LCD_D00__GPIO_1_0 + MX28_PAD_LCD_D01__GPIO_1_1 + MX28_PAD_LCD_D02__GPIO_1_2 + MX28_PAD_LCD_D03__GPIO_1_3 + MX28_PAD_LCD_D04__GPIO_1_4 + MX28_PAD_LCD_D05__GPIO_1_5 + MX28_PAD_LCD_D06__GPIO_1_6 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + hog_pins_tiva: hog@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_RDY3__GPIO_0_23 + MX28_PAD_GPMI_WRN__GPIO_0_25 + >; + fsl,voltage = ; + fsl,pull-up = ; + }; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "SPL"; - reg = <0x0 0x10000>; - read-only; - }; - partition@10000 { - label = "u-boot"; - reg = <0x10000 0x70000>; - read-only; - }; - partition@80000 { - label = "uboot-env1"; - reg = <0x80000 0x10000>; - }; - partition@90000 { - label = "uboot-env2"; - reg = <0x90000 0x10000>; - }; - partition@A0000 { - label = "rescue"; - reg = <0xA0000 0xF40000>; - }; - partition@FE0000 { - label = "spl-boot-data1"; - reg = <0xFE0000 0x10000>; - }; - partition@FF0000 { - label = "spl-boot-data2"; - reg = <0xFF0000 0x10000>; - }; - }; + hog_pins_coding: hog@2 { + reg = <2>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D01__GPIO_0_1 + MX28_PAD_GPMI_D03__GPIO_0_3 + MX28_PAD_GPMI_D04__GPIO_0_4 + MX28_PAD_GPMI_D06__GPIO_0_6 + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,voltage = ; + fsl,pull-up = ; }; }; -&usb0 { - vbus-supply = <®_usb_5v>; - status = "okay"; +®_fec_3v3 { + gpio = <&gpio0 0 0>; }; -&usbphy0 { - status = "okay"; +®_usb_5v { + gpio = <&gpio0 2 0>; +}; + +&spi2_pins_a { + fsl,pinmux-ids = < + MX28_PAD_SSP2_SCK__SSP2_SCK + MX28_PAD_SSP2_MOSI__SSP2_CMD + MX28_PAD_SSP2_MISO__SSP2_D0 + MX28_PAD_SSP2_SS0__GPIO_2_19 + >; }; diff --git a/arch/arm/dts/imx28.dtsi b/arch/arm/dts/imx28.dtsi index e14d8ef..130b414 100644 --- a/arch/arm/dts/imx28.dtsi +++ b/arch/arm/dts/imx28.dtsi @@ -100,7 +100,7 @@ status = "disabled"; }; - gpmi: gpmi-nand@8000c000 { + gpmi: nand-controller@8000c000 { compatible = "fsl,imx28-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -110,6 +110,8 @@ interrupt-names = "bch"; clocks = <&clks 50>; clock-names = "gpmi_io"; + assigned-clocks = <&clks 13>; + assigned-clock-parents = <&clks 10>; dmas = <&dma_apbh 4>; dma-names = "rx-tx"; status = "disabled"; @@ -948,6 +950,16 @@ fsl,pull-up = ; }; + usb1_pins_b: usb1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_PWM2__USB1_OVERCURRENT + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + usb0_id_pins_a: usb0id@0 { reg = <0>; fsl,pinmux-ids = < @@ -998,7 +1010,7 @@ clocks = <&clks 26>; }; - dcp: dcp@80028000 { + dcp: crypto@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53 54>; @@ -1011,7 +1023,7 @@ status = "disabled"; }; - ocotp: ocotp@8002c000 { + ocotp: efuse@8002c000 { compatible = "fsl,imx28-ocotp", "fsl,ocotp"; #address-cells = <1>; #size-cells = <1>; @@ -1317,7 +1329,7 @@ status = "disabled"; }; - etn_switch: switch@800f8000 { + eth_switch: switch@800f8000 { reg = <0x800f8000 0x8000>; status = "disabled"; }; diff --git a/arch/arm/dts/mxs-pinfunc.h b/arch/arm/dts/mxs-pinfunc.h index c6da987..31297ab 100644 --- a/arch/arm/dts/mxs-pinfunc.h +++ b/arch/arm/dts/mxs-pinfunc.h @@ -1,14 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Header providing constants for i.MX28 pinctrl bindings. * * Copyright (C) 2013 Lothar Waßmann - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html */ #ifndef __DT_BINDINGS_MXS_PINCTRL_H__