From: Kees Cook Date: Tue, 15 Aug 2017 16:19:24 +0000 (-0700) Subject: locking/refcounts, x86/asm: Implement fast refcount overflow protection X-Git-Tag: v4.14-rc1~162^2~21 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=7a46ec0e2f4850407de5e1d19a44edee6efa58ec;p=platform%2Fkernel%2Flinux-rpi.git locking/refcounts, x86/asm: Implement fast refcount overflow protection This implements refcount_t overflow protection on x86 without a noticeable performance impact, though without the fuller checking of REFCOUNT_FULL. This is done by duplicating the existing atomic_t refcount implementation but with normally a single instruction added to detect if the refcount has gone negative (e.g. wrapped past INT_MAX or below zero). When detected, the handler saturates the refcount_t to INT_MIN / 2. With this overflow protection, the erroneous reference release that would follow a wrap back to zero is blocked from happening, avoiding the class of refcount-overflow use-after-free vulnerabilities entirely. Only the overflow case of refcounting can be perfectly protected, since it can be detected and stopped before the reference is freed and left to be abused by an attacker. There isn't a way to block early decrements, and while REFCOUNT_FULL stops increment-from-zero cases (which would be the state _after_ an early decrement and stops potential double-free conditions), this fast implementation does not, since it would require the more expensive cmpxchg loops. Since the overflow case is much more common (e.g. missing a "put" during an error path), this protection provides real-world protection. For example, the two public refcount overflow use-after-free exploits published in 2016 would have been rendered unexploitable: http://perception-point.io/2016/01/14/analysis-and-exploitation-of-a-linux-kernel-vulnerability-cve-2016-0728/ http://cyseclabs.com/page?n=02012016 This implementation does, however, notice an unchecked decrement to zero (i.e. caller used refcount_dec() instead of refcount_dec_and_test() and it resulted in a zero). Decrements under zero are noticed (since they will have resulted in a negative value), though this only indicates that a use-after-free may have already happened. Such notifications are likely avoidable by an attacker that has already exploited a use-after-free vulnerability, but it's better to have them reported than allow such conditions to remain universally silent. On first overflow detection, the refcount value is reset to INT_MIN / 2 (which serves as a saturation value) and a report and stack trace are produced. When operations detect only negative value results (such as changing an already saturated value), saturation still happens but no notification is performed (since the value was already saturated). On the matter of races, since the entire range beyond INT_MAX but before 0 is negative, every operation at INT_MIN / 2 will trap, leaving no overflow-only race condition. As for performance, this implementation adds a single "js" instruction to the regular execution flow of a copy of the standard atomic_t refcount operations. (The non-"and_test" refcount_dec() function, which is uncommon in regular refcount design patterns, has an additional "jz" instruction to detect reaching exactly zero.) Since this is a forward jump, it is by default the non-predicted path, which will be reinforced by dynamic branch prediction. The result is this protection having virtually no measurable change in performance over standard atomic_t operations. The error path, located in .text.unlikely, saves the refcount location and then uses UD0 to fire a refcount exception handler, which resets the refcount, handles reporting, and returns to regular execution. This keeps the changes to .text size minimal, avoiding return jumps and open-coded calls to the error reporting routine. Example assembly comparison: refcount_inc() before: .text: ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp) refcount_inc() after: .text: ffffffff81546149: f0 ff 45 f4 lock incl -0xc(%rbp) ffffffff8154614d: 0f 88 80 d5 17 00 js ffffffff816c36d3 ... .text.unlikely: ffffffff816c36d3: 48 8d 4d f4 lea -0xc(%rbp),%rcx ffffffff816c36d7: 0f ff (bad) These are the cycle counts comparing a loop of refcount_inc() from 1 to INT_MAX and back down to 0 (via refcount_dec_and_test()), between unprotected refcount_t (atomic_t), fully protected REFCOUNT_FULL (refcount_t-full), and this overflow-protected refcount (refcount_t-fast): 2147483646 refcount_inc()s and 2147483647 refcount_dec_and_test()s: cycles protections atomic_t 82249267387 none refcount_t-fast 82211446892 overflow, untested dec-to-zero refcount_t-full 144814735193 overflow, untested dec-to-zero, inc-from-zero This code is a modified version of the x86 PAX_REFCOUNT atomic_t overflow defense from the last public patch of PaX/grsecurity, based on my understanding of the code. Changes or omissions from the original code are mine and don't reflect the original grsecurity/PaX code. Thanks to PaX Team for various suggestions for improvement for repurposing this code to be a refcount-only protection. Signed-off-by: Kees Cook Reviewed-by: Josh Poimboeuf Cc: Alexey Dobriyan Cc: Andrew Morton Cc: Arnd Bergmann Cc: Christoph Hellwig Cc: David S. Miller Cc: Davidlohr Bueso Cc: Elena Reshetova Cc: Eric Biggers Cc: Eric W. Biederman Cc: Greg KH Cc: Hans Liljestrand Cc: James Bottomley Cc: Jann Horn Cc: Linus Torvalds Cc: Manfred Spraul Cc: Peter Zijlstra Cc: Rik van Riel Cc: Serge E. Hallyn Cc: Thomas Gleixner Cc: arozansk@redhat.com Cc: axboe@kernel.dk Cc: kernel-hardening@lists.openwall.com Cc: linux-arch Link: http://lkml.kernel.org/r/20170815161924.GA133115@beast Signed-off-by: Ingo Molnar --- diff --git a/arch/Kconfig b/arch/Kconfig index 21d0089..2520ca5 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -931,6 +931,18 @@ config STRICT_MODULE_RWX config ARCH_WANT_RELAX_ORDER bool +config ARCH_HAS_REFCOUNT + bool + help + An architecture selects this when it has implemented refcount_t + using open coded assembly primitives that provide an optimized + refcount_t implementation, possibly at the expense of some full + refcount state checks of CONFIG_REFCOUNT_FULL=y. + + The refcount overflow check behavior, however, must be retained. + Catching overflows is the primary security concern for protecting + against bugs in reference counts. + config REFCOUNT_FULL bool "Perform full reference count validation at the expense of speed" help diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 781521b..73574c9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -55,6 +55,7 @@ config X86 select ARCH_HAS_KCOV if X86_64 select ARCH_HAS_MMIO_FLUSH select ARCH_HAS_PMEM_API if X86_64 + select ARCH_HAS_REFCOUNT select ARCH_HAS_UACCESS_FLUSHCACHE if X86_64 select ARCH_HAS_SET_MEMORY select ARCH_HAS_SG_CHAIN diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h index 7a9df3b..676ee58 100644 --- a/arch/x86/include/asm/asm.h +++ b/arch/x86/include/asm/asm.h @@ -74,6 +74,9 @@ # define _ASM_EXTABLE_EX(from, to) \ _ASM_EXTABLE_HANDLE(from, to, ex_handler_ext) +# define _ASM_EXTABLE_REFCOUNT(from, to) \ + _ASM_EXTABLE_HANDLE(from, to, ex_handler_refcount) + # define _ASM_NOKPROBE(entry) \ .pushsection "_kprobe_blacklist","aw" ; \ _ASM_ALIGN ; \ @@ -123,6 +126,9 @@ # define _ASM_EXTABLE_EX(from, to) \ _ASM_EXTABLE_HANDLE(from, to, ex_handler_ext) +# define _ASM_EXTABLE_REFCOUNT(from, to) \ + _ASM_EXTABLE_HANDLE(from, to, ex_handler_refcount) + /* For C file, we already have NOKPROBE_SYMBOL macro */ #endif diff --git a/arch/x86/include/asm/refcount.h b/arch/x86/include/asm/refcount.h new file mode 100644 index 0000000..ff871210 --- /dev/null +++ b/arch/x86/include/asm/refcount.h @@ -0,0 +1,109 @@ +#ifndef __ASM_X86_REFCOUNT_H +#define __ASM_X86_REFCOUNT_H +/* + * x86-specific implementation of refcount_t. Based on PAX_REFCOUNT from + * PaX/grsecurity. + */ +#include + +/* + * This is the first portion of the refcount error handling, which lives in + * .text.unlikely, and is jumped to from the CPU flag check (in the + * following macros). This saves the refcount value location into CX for + * the exception handler to use (in mm/extable.c), and then triggers the + * central refcount exception. The fixup address for the exception points + * back to the regular execution flow in .text. + */ +#define _REFCOUNT_EXCEPTION \ + ".pushsection .text.unlikely\n" \ + "111:\tlea %[counter], %%" _ASM_CX "\n" \ + "112:\t" ASM_UD0 "\n" \ + ASM_UNREACHABLE \ + ".popsection\n" \ + "113:\n" \ + _ASM_EXTABLE_REFCOUNT(112b, 113b) + +/* Trigger refcount exception if refcount result is negative. */ +#define REFCOUNT_CHECK_LT_ZERO \ + "js 111f\n\t" \ + _REFCOUNT_EXCEPTION + +/* Trigger refcount exception if refcount result is zero or negative. */ +#define REFCOUNT_CHECK_LE_ZERO \ + "jz 111f\n\t" \ + REFCOUNT_CHECK_LT_ZERO + +/* Trigger refcount exception unconditionally. */ +#define REFCOUNT_ERROR \ + "jmp 111f\n\t" \ + _REFCOUNT_EXCEPTION + +static __always_inline void refcount_add(unsigned int i, refcount_t *r) +{ + asm volatile(LOCK_PREFIX "addl %1,%0\n\t" + REFCOUNT_CHECK_LT_ZERO + : [counter] "+m" (r->refs.counter) + : "ir" (i) + : "cc", "cx"); +} + +static __always_inline void refcount_inc(refcount_t *r) +{ + asm volatile(LOCK_PREFIX "incl %0\n\t" + REFCOUNT_CHECK_LT_ZERO + : [counter] "+m" (r->refs.counter) + : : "cc", "cx"); +} + +static __always_inline void refcount_dec(refcount_t *r) +{ + asm volatile(LOCK_PREFIX "decl %0\n\t" + REFCOUNT_CHECK_LE_ZERO + : [counter] "+m" (r->refs.counter) + : : "cc", "cx"); +} + +static __always_inline __must_check +bool refcount_sub_and_test(unsigned int i, refcount_t *r) +{ + GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl", REFCOUNT_CHECK_LT_ZERO, + r->refs.counter, "er", i, "%0", e); +} + +static __always_inline __must_check bool refcount_dec_and_test(refcount_t *r) +{ + GEN_UNARY_SUFFIXED_RMWcc(LOCK_PREFIX "decl", REFCOUNT_CHECK_LT_ZERO, + r->refs.counter, "%0", e); +} + +static __always_inline __must_check +bool refcount_add_not_zero(unsigned int i, refcount_t *r) +{ + int c, result; + + c = atomic_read(&(r->refs)); + do { + if (unlikely(c == 0)) + return false; + + result = c + i; + + /* Did we try to increment from/to an undesirable state? */ + if (unlikely(c < 0 || c == INT_MAX || result < c)) { + asm volatile(REFCOUNT_ERROR + : : [counter] "m" (r->refs.counter) + : "cc", "cx"); + break; + } + + } while (!atomic_try_cmpxchg(&(r->refs), &c, result)); + + return c != 0; +} + +static __always_inline __must_check bool refcount_inc_not_zero(refcount_t *r) +{ + return refcount_add_not_zero(1, r); +} + +#endif diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index 0ea8afc..761fc88 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -36,6 +36,48 @@ bool ex_handler_fault(const struct exception_table_entry *fixup, } EXPORT_SYMBOL_GPL(ex_handler_fault); +/* + * Handler for UD0 exception following a failed test against the + * result of a refcount inc/dec/add/sub. + */ +bool ex_handler_refcount(const struct exception_table_entry *fixup, + struct pt_regs *regs, int trapnr) +{ + /* First unconditionally saturate the refcount. */ + *(int *)regs->cx = INT_MIN / 2; + + /* + * Strictly speaking, this reports the fixup destination, not + * the fault location, and not the actually overflowing + * instruction, which is the instruction before the "js", but + * since that instruction could be a variety of lengths, just + * report the location after the overflow, which should be close + * enough for finding the overflow, as it's at least back in + * the function, having returned from .text.unlikely. + */ + regs->ip = ex_fixup_addr(fixup); + + /* + * This function has been called because either a negative refcount + * value was seen by any of the refcount functions, or a zero + * refcount value was seen by refcount_dec(). + * + * If we crossed from INT_MAX to INT_MIN, OF (Overflow Flag: result + * wrapped around) will be set. Additionally, seeing the refcount + * reach 0 will set ZF (Zero Flag: result was zero). In each of + * these cases we want a report, since it's a boundary condition. + * + */ + if (regs->flags & (X86_EFLAGS_OF | X86_EFLAGS_ZF)) { + bool zero = regs->flags & X86_EFLAGS_ZF; + + refcount_error_report(regs, zero ? "hit zero" : "overflow"); + } + + return true; +} +EXPORT_SYMBOL_GPL(ex_handler_refcount); + bool ex_handler_ext(const struct exception_table_entry *fixup, struct pt_regs *regs, int trapnr) { diff --git a/include/linux/kernel.h b/include/linux/kernel.h index bd6d96c..6607225 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -277,6 +277,13 @@ extern int oops_may_print(void); void do_exit(long error_code) __noreturn; void complete_and_exit(struct completion *, long) __noreturn; +#ifdef CONFIG_ARCH_HAS_REFCOUNT +void refcount_error_report(struct pt_regs *regs, const char *err); +#else +static inline void refcount_error_report(struct pt_regs *regs, const char *err) +{ } +#endif + /* Internal, do not use. */ int __must_check _kstrtoul(const char *s, unsigned int base, unsigned long *res); int __must_check _kstrtol(const char *s, unsigned int base, long *res); diff --git a/include/linux/refcount.h b/include/linux/refcount.h index 591792c..48b7c9c 100644 --- a/include/linux/refcount.h +++ b/include/linux/refcount.h @@ -53,6 +53,9 @@ extern __must_check bool refcount_sub_and_test(unsigned int i, refcount_t *r); extern __must_check bool refcount_dec_and_test(refcount_t *r); extern void refcount_dec(refcount_t *r); #else +# ifdef CONFIG_ARCH_HAS_REFCOUNT +# include +# else static inline __must_check bool refcount_add_not_zero(unsigned int i, refcount_t *r) { return atomic_add_unless(&r->refs, i, 0); @@ -87,6 +90,7 @@ static inline void refcount_dec(refcount_t *r) { atomic_dec(&r->refs); } +# endif /* !CONFIG_ARCH_HAS_REFCOUNT */ #endif /* CONFIG_REFCOUNT_FULL */ extern __must_check bool refcount_dec_if_one(refcount_t *r); diff --git a/kernel/panic.c b/kernel/panic.c index a58932b..bdd18af 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -26,6 +26,7 @@ #include #include #include +#include #define PANIC_TIMER_STEP 100 #define PANIC_BLINK_SPD 18 @@ -601,6 +602,17 @@ EXPORT_SYMBOL(__stack_chk_fail); #endif +#ifdef CONFIG_ARCH_HAS_REFCOUNT +void refcount_error_report(struct pt_regs *regs, const char *err) +{ + WARN_RATELIMIT(1, "refcount_t %s at %pB in %s[%d], uid/euid: %u/%u\n", + err, (void *)instruction_pointer(regs), + current->comm, task_pid_nr(current), + from_kuid_munged(&init_user_ns, current_uid()), + from_kuid_munged(&init_user_ns, current_euid())); +} +#endif + core_param(panic, panic_timeout, int, 0644); core_param(pause_on_oops, pause_on_oops, int, 0644); core_param(panic_on_warn, panic_on_warn, int, 0644);