From: Alexander Beregalov Date: Sun, 29 Mar 2009 06:37:27 +0000 (-0700) Subject: ni5010: convert to net_device_ops X-Git-Tag: v3.0~9763^2~82 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=79f1bc06dbb05f222756d6df4a9ff95588c9cc06;p=platform%2Fkernel%2Flinux-amlogic.git ni5010: convert to net_device_ops Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c index 539e18a..2a8da47 100644 --- a/drivers/net/ni5010.c +++ b/drivers/net/ni5010.c @@ -189,6 +189,17 @@ static void __init trigger_irq(int ioaddr) outb(MM_EN_XMT|MM_MUX, IE_MMODE); /* Start transmission */ } +static const struct net_device_ops ni5010_netdev_ops = { + .ndo_open = ni5010_open, + .ndo_stop = ni5010_close, + .ndo_start_xmit = ni5010_send_packet, + .ndo_set_multicast_list = ni5010_set_multicast_list, + .ndo_tx_timeout = ni5010_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +}; + /* * This is the real probe routine. Linux has a history of friendly device * probes on the ISA bus. A good device probes avoids doing writes, and @@ -328,13 +339,8 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) outb(0, IE_RBUF); /* set buffer byte 0 to 0 again */ } printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); - memset(netdev_priv(dev), 0, sizeof(struct ni5010_local)); - dev->open = ni5010_open; - dev->stop = ni5010_close; - dev->hard_start_xmit = ni5010_send_packet; - dev->set_multicast_list = ni5010_set_multicast_list; - dev->tx_timeout = ni5010_timeout; + dev->netdev_ops = &ni5010_netdev_ops; dev->watchdog_timeo = HZ/20; dev->flags &= ~IFF_MULTICAST; /* Multicast doesn't work */