From: Alan Cox Date: Thu, 6 Aug 2009 19:45:24 +0000 (+0100) Subject: Staging: sep: rework write_register/read_register X-Git-Tag: v2.6.32-rc1~668^2~217 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=79de99e864fb731392bec78f251ce0310fed5d9a;p=platform%2Fupstream%2Fkernel-adaptation-pc.git Staging: sep: rework write_register/read_register Replace the macros with an inline to get type safety and pass sep_dev instead of the reg pointer Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/sep/sep_dev.h b/drivers/staging/sep/sep_dev.h index b3d48e1..1baff89 100644 --- a/drivers/staging/sep/sep_dev.h +++ b/drivers/staging/sep/sep_dev.h @@ -60,7 +60,7 @@ struct sep_device { unsigned long rar_region_addr; /* start address of the access to the SEP registers from driver */ - unsigned long reg_base_address; + void __iomem *reg_base_address; /* transaction counter that coordinates the transactions between SEP and HOST */ unsigned long host_to_sep_send_counter; /* counter for the messages from sep */ @@ -103,17 +103,27 @@ struct sep_device { extern struct sep_device *sep_dev; -extern inline void sep_write_reg(struct sep_device *dev, int reg, u32 value) +static inline void sep_write_reg(struct sep_device *dev, int reg, u32 value) { void __iomem *addr = dev->reg_base_address + reg; - writel(value, reg); + writel(value, addr); } -extern inline u32 sep_read_reg(struct sep_device *dev, int reg) +static inline u32 sep_read_reg(struct sep_device *dev, int reg) { void __iomem *addr = dev->reg_base_address + reg; - return readl(reg); + return readl(addr); } +/* wait for SRAM write complete(indirect write */ +static inline void sep_wait_sram_write(struct sep_device *dev) +{ + u32 reg_val; + do + reg_val = sep_read_reg(dev, HW_SRAM_DATA_READY_REG_ADDR); + while(!(reg_val & 1)); +} + + #endif diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h index 48f1591..8a4d27a 100644 --- a/drivers/staging/sep/sep_driver_config.h +++ b/drivers/staging/sep/sep_driver_config.h @@ -244,62 +244,6 @@ do { \ printk(KERN_WARNING info, param1, param2, param3, param4); \ } while (0) -#if 0 -/* write register macro with option for debug print */ -#define SEP_WRITE_REGISTER(address, value) \ -do { \ - if (sepDebug & SEP_DEBUG_LEVEL_REGISTERS) \ - printk(KERN_WARNING "Write Register: address %lu value %lu\n", \ - (unsigned long)(address), (unsigned long)(value)); \ - writel((value), (void *)(address)); \ -} while (0) - -/* read register macro with option for debug print */ -#define SEP_READ_REGISTER(address , value) \ -do { \ - (value) = readl((void *)(address)); \ - if (sepDebug & SEP_DEBUG_LEVEL_REGISTERS) \ - printk(KERN_WARNING "Read Register: address %lu value %lu\n", \ - (address), (value)); \ -} while (0) -#else - -#if 1 - -#define SEP_WRITE_REGISTER(address, value) writel((value), (void *)(address)) -#define SEP_READ_REGISTER(address, value) (value) = readl((void *)(address)) -#endif - -#endif - -#if 0 -#define SEP_WRITE_ROM(address, value) writel((value), (void *)(address)) -#define SEP_WRITE_REGISTER(address, value) \ -do { \ - unsigned long i; \ - for (i = 0; i < 1000; i++); \ - writel((value), (void *)(address)); \ -} while (0) - - -#define SEP_READ_REGISTER(address , value) \ -do { \ - unsigned long i; \ - for (i = 0; i < 1000; i++); \ - (value) = readl((void *) (address)); \ -} while (0) - -#endif - -/* wait for SRAM write complete(indirect write */ -#define SEP_WAIT_SRAM_WRITE_COMPLETE() \ -do { \ - unsigned long reg_val; \ - do { \ - SEP_READ_REGISTER(sep_dev->reg_base_address + \ - HW_SRAM_DATA_READY_REG_ADDR, (reg_val)); \ - } while (!(reg_val & 0x1)); \ -} while (0) #endif diff --git a/drivers/staging/sep/sep_ext_with_pci_driver.c b/drivers/staging/sep/sep_ext_with_pci_driver.c index 4840ed2..26246b3 100644 --- a/drivers/staging/sep/sep_ext_with_pci_driver.c +++ b/drivers/staging/sep/sep_ext_with_pci_driver.c @@ -424,7 +424,7 @@ static int __devinit sep_probe(struct pci_dev *pdev, "SEP Driver:io_memory_start_virtual_address is %p\n", sep_dev->io_memory_start_virtual_address); - sep_dev->reg_base_address = (unsigned long)sep_dev->io_memory_start_virtual_address; + sep_dev->reg_base_address = (void __iomem *)sep_dev->io_memory_start_virtual_address; /* set up system base address and shared memory location */ @@ -455,11 +455,11 @@ static int __devinit sep_probe(struct pci_dev *pdev, "SEP Driver: about to write IMR and ICR REG_ADDR\n"); /* clear ICR register */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_ICR_REG_ADDR, + sep_write_reg(sep_dev, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF); /* set the IMR register - open only GPR 2 */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_IMR_REG_ADDR, + sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); /* figure out our irq */ @@ -482,7 +482,7 @@ static int __devinit sep_probe(struct pci_dev *pdev, "SEP Driver: about to write IMR REG_ADDR"); /* set the IMR register - open only GPR 2 */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_IMR_REG_ADDR, + sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); #endif /* SEP_DRIVER_POLLING_MODE */ @@ -529,11 +529,10 @@ void sep_load_rom_code(void) for (i = 0; i < 4; i++) { /* write bank */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address - + SEP_ROM_BANK_register_offset, i); + sep_write_reg(sep_dev, SEP_ROM_BANK_register_offset, i); for (j = 0; j < CRYS_SEP_ROM_length / 4; j++) { - SEP_WRITE_REGISTER(sep_dev->reg_base_address + + sep_write_reg(sep_dev, CRYS_SEP_ROM_start_address_offset + 4*j, CRYS_SEP_ROM[i * 0x1000 + j]); @@ -547,13 +546,11 @@ void sep_load_rom_code(void) } /* reset the SEP*/ - SEP_WRITE_REGISTER(sep_dev->reg_base_address - + HW_HOST_SEP_SW_RST_REG_ADDR, 0x1); + sep_write_reg(sep_dev, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1); /* poll for SEP ROM boot finish */ do { - SEP_READ_REGISTER(sep_dev->reg_base_address - + HW_HOST_SEP_HOST_GPR3_REG_ADDR, regVal); + retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR); } while (!regVal); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_EXTENDED, @@ -562,38 +559,33 @@ void sep_load_rom_code(void) switch (regVal) { case 0x1: /* fatal error - read erro status from GPRO */ - SEP_READ_REGISTER(sep_dev->reg_base_address - + HW_HOST_SEP_HOST_GPR0_REG_ADDR, Error); + Error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver: ROM polling case 1\n"); break; case 0x2: /* Boot First Phase ended */ - SEP_READ_REGISTER(sep_dev->reg_base_address - + HW_HOST_SEP_HOST_GPR0_REG_ADDR, warning); + warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver: ROM polling case 2\n"); break; case 0x4: /* Cold boot ended successfully */ - SEP_READ_REGISTER(sep_dev->reg_base_address - + HW_HOST_SEP_HOST_GPR0_REG_ADDR, warning); + warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver: ROM polling case 4\n"); Error = 0; break; case 0x8: /* Warmboot ended successfully */ - SEP_READ_REGISTER(sep_dev->reg_base_address - + HW_HOST_SEP_HOST_GPR0_REG_ADDR, warning); + warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver: ROM polling case 8\n"); Error = 0; break; case 0x10: /* ColdWarm boot ended successfully */ - SEP_READ_REGISTER(sep_dev->reg_base_address - + HW_HOST_SEP_HOST_GPR0_REG_ADDR, warning); + warning = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver: ROM polling case 16\n"); Error = 0; diff --git a/drivers/staging/sep/sep_main_mod.c b/drivers/staging/sep/sep_main_mod.c index efbb1a2f..7e2fd3d 100644 --- a/drivers/staging/sep/sep_main_mod.c +++ b/drivers/staging/sep/sep_main_mod.c @@ -374,9 +374,7 @@ void sep_driver_poll() #ifdef SEP_DRIVER_POLLING_MODE while (sep_dev->host_to_sep_send_counter != (retVal & 0x7FFFFFFF)) - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR2_REG_ADDR, - retVal); + retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR2_REG_ADDR); sep_dev->sep_to_host_reply_counter++; #else @@ -446,7 +444,7 @@ static int sep_release(struct inode *inode_ptr, struct file *file_ptr) #if 0/*!SEP_DRIVER_POLLING_MODE*/ /* close IMR */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_IMR_REG_ADDR, 0x7FFF); + sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, 0x7FFF); /* release IRQ line */ free_irq(SEP_DIRVER_IRQ_NUM, &sep_dev->reg_base_address); @@ -542,9 +540,7 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait) #if SEP_DRIVER_POLLING_MODE while (sep_dev->host_to_sep_send_counter != (retVal & 0x7FFFFFFF)) { - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR2_REG_ADDR, - retVal); + retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR2_REG_ADDR); for (count = 0; count < 10 * 4; count += 4) DEBUG_PRINT_2(SEP_DEBUG_LEVEL_EXTENDED, @@ -581,9 +577,7 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait) count, *((unsigned long *)(sep_dev->shared_area_addr + 0x1800 + count))); - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR2_REG_ADDR, - retVal); + retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR2_REG_ADDR); DEBUG_PRINT_1(SEP_DEBUG_LEVEL_EXTENDED, "retVal is %lu\n", retVal); /* check if the this is sep reply or request */ if (retVal >> 31) { @@ -913,16 +907,13 @@ for the current transaction */ #if (SEP_DRIVER_RECONFIG_MESSAGE_AREA == 1) /* send the new SHARED MESSAGE AREA to the SEP */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_HOST_SEP_GPR1_REG_ADDR, + sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep_dev->phys_shared_area_addr); /* poll for SEP response */ - SEP_READ_REGISTER(sep_dev->reg_base_address + HW_HOST_SEP_HOST_GPR1_REG_ADDR, - retVal); + retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR1_REG_ADDR); while (retVal != 0xffffffff && retVal != sep_dev->phys_shared_area_addr) - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR1_REG_ADDR, - retVal); + retVal = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR1_REG_ADDR); /* check the return value (register) */ if (retVal != sep_dev->phys_shared_area_addr) { @@ -1060,15 +1051,14 @@ irqreturn_t sep_inthandler(int irq, void *dev_id) int_error = IRQ_HANDLED; /* read the IRR register to check if this is SEP interrupt */ - SEP_READ_REGISTER(sep_dev->reg_base_address + HW_HOST_IRR_REG_ADDR, reg_val); + reg_val = sep_read_reg(sep_dev, HW_HOST_IRR_REG_ADDR); DEBUG_PRINT_1(SEP_DEBUG_LEVEL_EXTENDED, "SEP Interrupt - reg is %08lx\n", reg_val); /* check if this is the flow interrupt */ if (0/*reg_val & (0x1 << 11)*/) { /* read GPRO to find out the which flow is done */ - SEP_READ_REGISTER(sep_dev->reg_base_address + HW_HOST_IRR_REG_ADDR, - flow_id); + flow_id = sep_read_reg(sep_dev, HW_HOST_IRR_REG_ADDR); /* find the contex of the flow */ error = sep_find_flow_context(flow_id >> 28, &flow_context_ptr); @@ -1097,7 +1087,7 @@ irqreturn_t sep_inthandler(int irq, void *dev_id) end_function_with_error: /* clear the interrupt */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_ICR_REG_ADDR, reg_val); + sep_write_reg(sep_dev, HW_HOST_ICR_REG_ADDR, reg_val); end_function: @@ -2235,8 +2225,7 @@ static void sep_send_command_handler() sep_dev->host_to_sep_send_counter++; /* send interrupt to SEP */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + - HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); + sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_BASIC, "SEP Driver:<-------- sep_send_command_handler end\n"); @@ -2269,7 +2258,7 @@ static void sep_send_reply_command_handler() sep_dev->host_to_sep_send_counter++; /* send the interrupt to SEP */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_HOST_SEP_GPR2_REG_ADDR, + sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep_dev->host_to_sep_send_counter); /* update both counters */ @@ -3016,15 +3005,13 @@ static int sep_start_handler(void) /* wait in polling for message from SEP */ do { - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR3_REG_ADDR, reg_val); + reg_val = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR); } while (!reg_val); /* check the value */ if (reg_val == 0x1) { /* fatal error - read erro status from GPRO */ - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR0_REG_ADDR, error); + error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); goto end_function; } @@ -3086,9 +3073,7 @@ static int sep_init_handler(unsigned long arg) message_ptr = (unsigned long *)command_args.message_addr; /* set the base address of the SRAM */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + - HW_SRAM_ADDR_REG_ADDR, - HW_CC_SRAM_BASE_ADDRESS); + sep_write_reg(sep_dev, HW_SRAM_ADDR_REG_ADDR, HW_CC_SRAM_BASE_ADDRESS); for (counter = 0 ; counter < command_args.message_size_in_words; @@ -3096,7 +3081,7 @@ static int sep_init_handler(unsigned long arg) get_user(message_word, message_ptr); /* write data to SRAM */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_SRAM_DATA_REG_ADDR, + sep_write_reg(sep_dev, HW_SRAM_DATA_REG_ADDR, message_word); DEBUG_PRINT_1(SEP_DEBUG_LEVEL_EXTENDED, @@ -3104,19 +3089,18 @@ static int sep_init_handler(unsigned long arg) message_word); /* wait for write complete */ - SEP_WAIT_SRAM_WRITE_COMPLETE(); + sep_wait_sram_write(sep_dev); } DEBUG_PRINT_0(SEP_DEBUG_LEVEL_BASIC, "SEP Driver:--------> sep_init_handler - finished getting messages from user space\n"); /* signal SEP */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_HOST_SEP_GPR0_REG_ADDR, + sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1); do { - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR3_REG_ADDR, reg_val); + reg_val = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR3_REG_ADDR); } while (!(reg_val & 0xFFFFFFFD)); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_BASIC, @@ -3127,15 +3111,13 @@ static int sep_init_handler(unsigned long arg) DEBUG_PRINT_0(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver:init failed\n"); - SEP_READ_REGISTER(sep_dev->reg_base_address + 0x8060, error); + error = sep_read_reg(sep_dev, 0x8060); DEBUG_PRINT_1(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver:sw monitor is %lu\n", error); /* fatal error - read erro status from GPRO */ - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_HOST_GPR0_REG_ADDR, - error); + error = sep_read_reg(sep_dev, HW_HOST_SEP_HOST_GPR0_REG_ADDR); DEBUG_PRINT_1(SEP_DEBUG_LEVEL_EXTENDED, "SEP Driver:error is %lu\n", error); goto end_function; @@ -3307,7 +3289,7 @@ static int sep_end_transaction_handler(unsigned long arg) #if 0/*!SEP_DRIVER_POLLING_MODE*/ /* close IMR */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + HW_HOST_IMR_REG_ADDR, 0x7FFF); + sep_write_reg(sep_dev, HW_HOST_IMR_REG_ADDR, 0x7FFF); /* release IRQ line */ free_irq(SEP_DIRVER_IRQ_NUM, &sep_dev->reg_base_address); @@ -3352,9 +3334,7 @@ static void sep_flow_done_handler(struct work_struct *work) (void *)sep_dev->shared_area_addr, flow_data_ptr->message_size_in_bytes); - SEP_WRITE_REGISTER(sep_dev->reg_base_address + - HW_HOST_HOST_SEP_GPR2_REG_ADDR, - 0x2); + sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR2_REG_ADDR, 0x2); } mutex_unlock(&sep_mutex); } @@ -3837,33 +3817,26 @@ static void sep_configure_dma_burst(void) "SEP Driver:<-------- sep_configure_dma_burst start \n"); /* request access to registers from SEP */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + - HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2UL); + sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_BASIC, "SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (write reg) \n"); - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_BUSY_REG_ADDR, regVal); + regVal = sep_read_reg(sep_dev, HW_HOST_SEP_BUSY_REG_ADDR); while (regVal) - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_BUSY_REG_ADDR, regVal); + regVal = sep_read_reg(sep_dev, HW_HOST_SEP_BUSY_REG_ADDR); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_BASIC, "SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (while(revVal) wait loop) \n"); /* set the DMA burst register to single burst*/ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + - HW_AHB_RD_WR_BURSTS_REG_ADDR, 0x0UL); + sep_write_reg(sep_dev, HW_AHB_RD_WR_BURSTS_REG_ADDR, 0x0UL); /* release the sep busy */ - SEP_WRITE_REGISTER(sep_dev->reg_base_address + - HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x0UL); - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_BUSY_REG_ADDR, regVal); + sep_write_reg(sep_dev, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x0UL); + regVal = sep_read_reg(sep_dev, HW_HOST_SEP_BUSY_REG_ADDR); while (regVal != 0x0) - SEP_READ_REGISTER(sep_dev->reg_base_address + - HW_HOST_SEP_BUSY_REG_ADDR, regVal); + regVal = sep_read_reg(sep_dev, HW_HOST_SEP_BUSY_REG_ADDR); DEBUG_PRINT_0(SEP_DEBUG_LEVEL_BASIC, "SEP Driver:<-------- sep_configure_dma_burst done \n");