From: Bin Meng Date: Thu, 24 May 2018 06:40:47 +0000 (-0700) Subject: usb: xhci: Set accurate add context flags when updating hub attributes X-Git-Tag: v2018.07-rc1~15^2~23 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=793c819c6e2168110ad7cfca0349738c79d79a1f;p=platform%2Fkernel%2Fu-boot.git usb: xhci: Set accurate add context flags when updating hub attributes If a USB 3.0 hub is plugged into the root port of the xHC, the xHCI driver will issue a 'Configure Endpoint' command to the xHC for it to update its internal data structure for this hub device. The hub attributes are in the slot context so we need tell xHC to update the slot context by setting the add context flags of the input control context to only cover the slot context. At present the add context flags is or'ed with the slot context bit, but it should really be accurately set to the slot context, as the variable that holds the value of the add context flags comes from whatever was set in the last command execution, which may contain additional contexts that 'Configure Endpoint' command should not touch. Some xHC implementations like x86 don't complain such, but it was observed on Renesas RCar Gen3 platform that the RCar xHC complains with a 'TRB error' completion codes as the response. Reported-by: Marek Vasut Signed-off-by: Bin Meng Tested-by: Marek Vasut Tested-by: Matthias Blankertz --- diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 3adb002..565948c 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1424,7 +1424,7 @@ static int xhci_update_hub_device(struct udevice *dev, struct usb_device *udev) ctrl_ctx = xhci_get_input_control_ctx(in_ctx); /* Initialize the input context control */ - ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); + ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG); ctrl_ctx->drop_flags = 0; xhci_inval_cache((uintptr_t)out_ctx->bytes, out_ctx->size);