From: Benjamin Herrenschmidt Date: Wed, 12 Apr 2017 03:27:02 +0000 (+1000) Subject: ftgmac100: Use device "compatible" property, not machine. X-Git-Tag: v4.12-rc1~64^3~195^2~8 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=78d28543a6093fad8f1b00a5debbde02f392ebb4;p=platform%2Fkernel%2Flinux-exynos.git ftgmac100: Use device "compatible" property, not machine. We test for aspeed chips to handle a couple of special cases, but we do that by checking the machine type which isn't right. Instead check the actual device compatible property. This also updates the dtsi files for the aspeed SoC to match. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: David S. Miller --- diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 0b4932c..6068e79 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -42,7 +42,7 @@ }; mac0: ethernet@1e660000 { - compatible = "faraday,ftgmac100"; + compatible = "aspeed,ast2400-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; no-hw-checksum; @@ -50,7 +50,7 @@ }; mac1: ethernet@1e680000 { - compatible = "faraday,ftgmac100"; + compatible = "aspeed,ast2400-mac", "faraday,ftgmac100"; reg = <0x1e680000 0x180>; interrupts = <3>; no-hw-checksum; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index b664fe3..4dbe91a 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -33,7 +33,7 @@ }; mac0: ethernet@1e660000 { - compatible = "faraday,ftgmac100"; + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e660000 0x180>; interrupts = <2>; no-hw-checksum; @@ -41,7 +41,7 @@ }; mac1: ethernet@1e680000 { - compatible = "faraday,ftgmac100"; + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; reg = <0x1e680000 0x180>; interrupts = <3>; no-hw-checksum; diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 3994a83..e793d35 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -92,6 +92,7 @@ struct ftgmac100 { /* Misc */ bool need_mac_restart; + bool is_aspeed; }; static void ftgmac100_set_rx_ring_base(struct ftgmac100 *priv, dma_addr_t addr) @@ -1322,8 +1323,7 @@ static int ftgmac100_setup_mdio(struct net_device *netdev) if (!priv->mii_bus) return -EIO; - if (of_machine_is_compatible("aspeed,ast2400") || - of_machine_is_compatible("aspeed,ast2500")) { + if (priv->is_aspeed) { /* This driver supports the old MDIO interface */ reg = ioread32(priv->base + FTGMAC100_OFFSET_REVR); reg &= ~FTGMAC100_REVR_NEW_MDIO_INTERFACE; @@ -1388,6 +1388,7 @@ static int ftgmac100_probe(struct platform_device *pdev) int irq; struct net_device *netdev; struct ftgmac100 *priv; + struct device_node *np; int err = 0; if (!pdev) @@ -1443,17 +1444,18 @@ static int ftgmac100_probe(struct platform_device *pdev) /* MAC address from chip or random one */ ftgmac100_setup_mac(priv); - if (of_machine_is_compatible("aspeed,ast2400") || - of_machine_is_compatible("aspeed,ast2500")) { + np = pdev->dev.of_node; + if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac") || + of_device_is_compatible(np, "aspeed,ast2500-mac"))) { priv->rxdes0_edorr_mask = BIT(30); priv->txdes0_edotr_mask = BIT(30); + priv->is_aspeed = true; } else { priv->rxdes0_edorr_mask = BIT(15); priv->txdes0_edotr_mask = BIT(15); } - if (pdev->dev.of_node && - of_get_property(pdev->dev.of_node, "use-ncsi", NULL)) { + if (np && of_get_property(np, "use-ncsi", NULL)) { if (!IS_ENABLED(CONFIG_NET_NCSI)) { dev_err(&pdev->dev, "NCSI stack not enabled\n"); goto err_ncsi_dev; @@ -1478,7 +1480,7 @@ static int ftgmac100_probe(struct platform_device *pdev) netdev->features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM | NETIF_F_GRO | NETIF_F_SG; if (priv->use_ncsi && - of_get_property(pdev->dev.of_node, "no-hw-checksum", NULL)) + of_get_property(np, "no-hw-checksum", NULL)) netdev->features &= ~NETIF_F_HW_CSUM; /* register network device */